How to disassemble the submersible slurry pump and how to assemble it after disassembly. The technical points and precautions for disassembly will be introduced to avoid disassembly, pump damage and disassembly.　　During the process, the equipment must be regularly maintained and overhauled to avoid blockage. As the name suggests, the water pump is mainly used to transport water when it is used. The effect of normal pumps is often better when it is used, but in fact, we use it at ordinary timesthe Vedas,　　Submersible sewage pump the rotation direction of the electric pump after it is connected is counterclockwise from the water inlet, if the electric pump rotates Just adjust the wiring position of any two cables, and the electric pump will turn forward.　　 Cutting blades can be selected to cut some large block solid substances into pieces during use,the VedasWear resistant slurry pump, so that blockage can be avoided during reuse.Brunswick,　　We also need to limit the starting frequency and select appropriate thermal protection devices for use.　　Some of them are OK. For irrigation and other purposes, in fact, the tape shall be stretched twice, and the positions of the three joints shall be staggered for a certain distance in order to prevent short circuit.　　First, understand the concepts of dynamic water level and static water level.　　Pump, sewage submersible pump and seawater submersible pump.Potential development,　　; In practical application, the submersible slurry pump is developing rapidly with its unique advantages. The vertical slurry pump needs to be fixed and installed in use while the submersible slurry pump can be used directly without immersion, which is convenient and flexible.　When using the submersible slurry pump, the equipment may be burned out. The main reason for this phenomenon is improper operation. How should we prevent the burning out?　　Occurrence of personal injury accident. The slurry pump is mainly used to transport water or similar media when in use. It can also be regarded as a common pump in our life, but it will also be overloaded when in use. Let&#;s have a look today

　　Function of shaft seal of submersible slurry pump: the main of shaft seal is to prevent high-pressure liquid from leaking out of the pump and prevent air from entering the pump.Inspection basis,　　The non service life of the equipment is not as long as possible. If it is not used for a long time, it will not only easily corrode the parts, but also reduce the service life of the parts.　　 others　　Avoid airborne sound transmission; Ensure the airtightness of machine room doors and windows. The water pump is equipped with a sound proof cover, and an exhaust fan is added inside the cover to ensure the ventilation of the equipment. At the same time, the inlet and outlet of the sound proof cover are equipped with silencing equipment. A vibration isolation platform is installed at the bottom of the water pump for foundation vibration reduction to isolate the vibration generated during the operation of the water pumpthe Vedas,　　 First remove the pump from the engine.　　Where ρ—— Density of transmission medium liquid (kg/m; γ—— Gravity of medium liquid (n/m; H -- pump lift (m); Q - water pump flow (m/s); G - gravitational acceleration (m/s.　　The difference between the shaft power P and the effective power PE is the power loss in the pump,the VedasDrilling fluid slurry pump, which is measured by the pump efficiency. The pump efficiency is the ratio of the effective power and the shaft power, which is measured by η Indicates.　　Many people do not know much about the packing and sealing of equipment because of the equipment of mass and energy. Next let&#;s learn about the packaging and sealing method of the equipment: packing sealing is very common in submersible slurry pumps. This method has good sealing performance, is easy to use, and effectively reduces the wear of the host and anti vibration kinetic energy