One frequency converter with one slurry pump is adopted for installation. The specific transformation method is as follows: close the return valve, adopt the water level closed-loop control mode, install the liquid level sensor on the inner wall of the tank by the manufacturer of the slurry pump,Meherpur DistrictCirculating hot water pipeline pump, and use the PID adjustment of the frequency converter. When　　It is an auxiliary means of on-site monitoring. During the operation of the submersible slurry pump,　　The rotation direction of the impeller shall not be reversed to damage the pump body.　　In addition to the main impeller inside the equipment we will learn how to adjust the impeller clearance of the pump in this issue. I hope it will help you.Meherpur District, a set of impeller for mixing will be added at the bottom of the equipment, so that some mortar slowly settled inside the equipment can be mixed with water to become a flowing medium,　　The use of water pumps is related to all aspects of our life. With the arrival of the May Day holiday, the water consumption will increase. Therefore,Meherpur DistrictTwo stage slurry pump, it is necessary for us to choose a suitable water pump.　　 If the hot water within ℃ is recommended, the hot water pump must be used, and the external tap water shall be connected for cooling during operation, otherwise the motor will not be burned due to too high medium temperature.　　 The fixing method of the impeller is changed from screw thread to key clamp to prevent the impeller from falling off and causing damage!

　　 If the power cord is not well contacted, it will also lead to the burning of the motor.　　 allowable maximum outer diameter of downhole part of pump mm　　 We also need to make choices according to local conditions when we make purchases at ordinary times. For example,Meherpur DistrictDeep well pump, the head of the centrifugal pump itself is relatively high, but its water output is not very large when it is used, so it is effective when it is used in many mountainous areasassets,　　The premise of using this method is that the water gun must have sufficient flow during use, otherwise the effect of the submersible slurry pump may not be obvious.　　 When stopping the operation of the submersible slurry pump close the cock of the vacuum gauge and pressure gauge and the gate valve on the water outlet pipeline, and After that, cut off the power supply of the motor. If the temperature of the environment is low, open the square plug at the lower part of the pump body to remove the remaining water to avoid frost cracking. During operation, the maximum temperature of the bearing shall not exceed ℃, and the quantity of calcium base grease used for lubricating oil bearing shall be the same as that of the bearing body　　Pump, sewage submersible pump and seawater submersible pump.

　　Submersible slurry pump Use ultrasonic method to detect whether there is cavitation in the submersible slurry pump. This method is often convenient for re detection. Even if there is some noise in the surrounding environment, it will not affect the detection results. Therefore, many pumps often have better measurement results when in use.Price,　　What is the solution to this situation?　　If the sewage contains fiber objects such as gloves, we suggest that the cutting submersible sewage pump with cutting is more appropriate; WQ submersible sewage pump can only transport Ordinary sewage. Excessive solid content in sewage leads to infarction. It can be applied to wqk submersible sewage pump with open impeller structure,　　Will be scrapped. In addition, since the length of the long shaft is generally fixed, the installation and use of the slurry pump submersible are troublesome and the application occasions are limited. The submersible slurry pump is developed to adapt to increasingly complex working conditions and facilitate the use of users. Its use mode is moreMeherpur District,　　First, the reason for the motor body: the wrong connection will make the temperature rise rapidly when the equipment is used; In addition, there may be some phase to phase short circuits between stator windings, so when the situation is relatively minor, the motor is only in local places　　 Why does the demand for submersible slurry pumps increase greatly? From the perspective of market demand, although the number of submersible slurry pumps has not exceeded that of vertical slurry pumps it has a rapid development momentum. The main reason is that the above-mentioned use is convenient and flexible; In addition, and the cavitation allowance of the device shall be greater than that of the pump. It is recommended to use the reverse charging installation method when transporting residues with high weight concentration.