Check if the power supply voltage is below the allowable value.Problem: The power indicator light of the aluminum alloy elevator is not on, and the lifting does not operate. Method: Check whether the power cord is correctly connected to the power socket; Check whether the circuit breaker switch is closed and whether the leakage protection switch is tripped.Dodhurt,After assembly and debugging, roll and move the nut to the left end of the bolt and tighten the half round head bolt. Adjust the position of the collision rod up and down based on the lifting degree of the aluminum alloy elevator platform, so that when the lifting degree of the aluminum alloy elevator platform exceeds the predetermined height, move the nut to collide with the collision rod and roll it clockwise. Push the limit switch contact to cut off the power supply.The scientific design schemes for aluminum alloy elevators mainly include leveling and locking circuits, telescopic balance circuits, variable amplitude balance circuits, emergency lowering systems, etc. In order to prevent sudden damage to the hydraulic system or pipelines of the platform due to accidents, and to ensure that the workbench does not experience situations that endanger the safety of personnel and equipment such as sudden arm fall or workbench overturning, we have designed different solutions for each system according to its different conditions.SequeiraMachine manufacturers and other related businesses. Merchants with this business are welcomeIn low concentration carbon monoxide gas. It can cause symptoms such as headache, shortness of breath, body weakness and dizziness, psychological confusion and even brain damage. In severe cases, it can cause death, as this not only reduces the service life but also poses safety hazards.

The problem is that the power indicator light is on, but there is&quo; in the electrical box when the up button is pressed; Clacking sound&rdquo, Does the platform not rise or can only rise to a limited height?Introduction to the curved arm type: The curved arm type aluminum alloy elevator is an updated product of the folded arm type. Capable of suspending and extending operations, crossing certain obstacles or lifting and lowering at one location for multi-point operations; degree rotation, large platform capacity capable of two or more people working simultaneously and carrying certain equipment; The lifting platform has good mobility and convenient transfer of venue; Beautiful appearance, suitable for large-scale operations such as stations, docks,DodhurtElevating aluminum alloy platform, shopping malls, sports venues, residential properties, factories and mining workshops.Check if the power supply voltage is below the allowable value.production,Machine manufacturers and other related businesses. Merchants with this business are welcomeNext, let's talk about the maintenance and upkeep of mechanical equipment for aluminum alloy elevators: the brakes of each mechanism should be regularly inspected and adjusted to ensure flexibility and reliability.After hours of operation of the elevator, minor repairs will be carried out to the mechanical and electrical systems. Professional aluminum alloy elevator manufacturer is safe, environmentally friendly, and economical! Our products are exported to foreign countries and highly trusted

The classification characteristics of aluminum alloy elevators include various types of aluminum alloy elevators, including single masted aluminum alloy elevators, double masted aluminum alloy elevators, three masted aluminum alloy elevators, four masted aluminum alloy elevators, and six masted aluminum alloy elevators. The product has stable performance, exquisite and beautiful appearance, excellent quality, and is widely sold domestically and internationally. It is our company's best-selling flagship product. Below, we will introduce the characteristics of various types of elevators: single mast aluminum alloy elevators: This series of high-altitude work platforms use high-quality high-strength aluminum profiles for lifting structures, small size, light weight, balanced lifting, safety and reliability, and are widely used in factories, hotels, restaurants, etc Airports, theaters, exhibition halls, and other places are equipped with double masted aluminum alloy elevators for maintenance, painting, decoration, replacement of lighting fixtures, and the overall structure is made of high-strength aluminum profiles. It has a large load capacity a large platform area, good stability, flexible operation and convenient implementation. The lifting and lowering uses an external V power supply or optional power,DodhurtDouble column aluminum alloy elevator, Walking can be manually pushed or equipped with an auxiliary self-propelled device, which is safe, lightweight, and practical to operate. Widely used in buildings, hotels, shopping malls, factories, stations, airports and other places.Quotation sheet,The main components of the Hunter hydraulic fixed elevator are: . The shaft part is a closed or mesh frame enclosed by buildings or lightweight steel structures, with steel guide rails installed on both sides of the interior. . The driving part is equipped with a hydraulic drive motor, oil pump, and safety valve,DodhurtMobile aluminum alloy elevator, A small oil tank for hydraulic components such as speed control valves and directional valves: . The oil cylinder part: It is composed of one or more oil cylinders of the lifting oil cylinder straight top platform or lifting shear fork frame: . The door system part: It is a closed or mesh platform door or landing door system composed of steel structure, open platforms do not have doors. . The electrical part: It includes power, signal, Composition of safety and lighting devices: Platform parts: It is a steel structure platform that carries heavy objects, which can be closed (i.e. cabin type) or open, with guide rollers or guide shoes installed on both sides. The bottom of the platform can be connected to a lifting oil cylinder or a lifting shear fork shaped steel frame. When we use aluminum alloy elevators, we need to regularly inspect, maintain, and maintain them, which can not only extend the service life of the aluminum alloy elevator, Can make it work with greater power! For example, the transmission part should have sufficient oil, and vulnerable parts must be regularly inspected, repaired, or replaced. Mechanical bolts, especially parts that frequently vibrate, such as slewing bearings and lifting arm connecting bolts, should be checked for looseness. If there is looseness, it must be tightened or replaced immediately. Next let's take a look at the regulations for the maintenance time of aluminum alloy elevators: daily maintenance (carried out per shift).The main lifting mast adopts high-strength aluminum alloy profiles, which have high safety and light overall weight.According to the number of masts, it can be divided into: single mast aluminum alloy lifting platform: supported by single mast operating platform, which is an early aluminum alloy elevator. The entire machine is light in weight and flexible in movement, suitable for single person operation. After condensation, it can enter general standard doorways and elevators in buildings.Dodhurt,The standard rack free design of the lifting and lowering machine with high safety performance ensures that the platform will not fall, and the limit and limit switches further ensure the safety of construction personnel.. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the aluminum alloy elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing and fastening screws for aluminum alloy elevators, it is necessary to use the correct diagonal first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the aluminum alloy elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the maintenance of the aluminum alloy elevator is completed, the equipment maintenance record must be filled out. The maintenance record should include the equipment maintenance date, the personnel participating in the maintenance, the maintenance items, model and specification of the replaced parts, the effectiveness of the maintenance, and whether the equipment still has problems after the maintenance is completed.Working on an aluminum alloy elevator workbench. Must wear safety belts, helmets, and other tools to prevent accidents.