High price performance price ratio: because of its unique structural connection, the regulations on wood are not too high, and raw materials can also be used flexibly, so the price is much lower than that of solid wood flooring.Lacquer cloth green ( piece)Gabu,You can take some steps to ensure a smooth and seamless installation: remove the base plate and door frame before starting.This will make it easier for your installation team to get the perfect fit.No matter what kind of floor you are currently using, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.We hope these techniques will help simplify the plan for installing new floors.If you plan to renovate your house and add new floor elements, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.European and American countries call this kind of floor RVP (rigid vinyl plate), rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, with a thickness of about .mm, transparent texture, strong adhesion, wear resistance and scratch resistance, and the wear-resistant coefficient can reach - revolutions.[]Melamine surface coating is generally used for wallboard tabletop board, this kind of surface coated floor is called 'false floor'Its wear-resistant revolution is only - revolutions. If it is used with high strength, the decorative paper on the surface will wear out after two or three months. The standard laminate floor will not have such a problem after years of normal use. There is no wear-resistant layer on this kind of floor decorative paper, the pattern is beautiful and clear, and it is relatively smooth when touched by hand, which is the place where laymen are easy to be fooled.

Easy to clean: medical treatment is simple, bright as a new mouth, no stains, with good wear resistance, without excessive vitality maintenance.According to statistics, the solid wood composite floor prepared for the sales market will not be waxed within years, and the wind color of automobile coating will also be maintained.This is obviously compared with the maintenance of solid wood flooring.Third, strong wear resistance. Fire protection: the fire rating of SPC floor is B, second only to stone. It will automatically extinguish after leaving the flame for seconds, flame retardant non spontaneous combustion, and will not produce toxic and harmful gases.It is suitable for occasions with high fire protection requirements.OK or not?,The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns, it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, and the flame retardant raw materials are listed as class a fire safety according to the national standard, such as marble wall tiles, etc.The technology of Class B flame retardant grade includes mm diameter cotton wool, sprinkled with ethanol, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned,Hirsch HowardTips for cleaning laminate flooring, accurately measure the diameter of the burned PVC latch floor impression. If it is less than mm, it is Class B flame retardant grade.Instead of watching it burn.Generally, the plate has a certain degree of expansion, so some gaps (.mm is appropriate) should be left between the laths during splicing to avoid arching.If the floor of the room is uneven, it can be paved with wooden keel for leveling, and then nailed with lath on it. After planing, clean and warm.A short wooden floor strip has been launched in the market, which can be combined freely according to the size of the room, and can be assembled into a variety of patterns at will.This kind of short plank is more practical, but the disadvantage is that the cost is not low.If the floor is made of wood, the wallboard can also be decorated with plates, so that the overall structure of the room tends to be unified.Wall panels can be used as whole wall paneling or only as dado paneling.Wood wallboard is the best for large wallboard concrete wall. It can directly fix the board to the wall with adhesive.If the white ash interior wall of brickwork structure is decorated with wallboard, it shall be fixed for minutes first×mm vertical wood wall reinforcement, and then fix the plate to the wood wall reinforcement with wood screws.Family decorative wallboard is best based on plywood, and its strength is appropriate.Then stick wood veneer on its surface to make up for the deficiency of plywood pattern.After the veneer is pasted, apply one or two layers of matte paint, and the pattern of the wallboard will be clear and beautiful, smooth and three-dimensional.Wood floor and wood wallboard interweave, making the style of the whole room unified both simple and elegant.On the basis of uniform color or reasonable interweaving, it can make the whole room comfortable and soft, and give people an indescribable sense of mystery.Introduction of floor leather

The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.assets,durabilitySPC ground anti-skid, and the ground anti-skid shall meet the European standard RBecause of the low thermal conductivity and excellent anti-skid performance of the ground, compared with ordinary floor tiles and marble, SPC floor feels astringent when sticking water and is not easy to roll. Therefore, ground building decoration materials are preferred in public places with high safety regulations,Hirsch HowardWhat board is waterproof, such as toilets, showers, hospitals, kindergartens, medical management centers, rehabilitation hospitals, colleges and universities, which are very popular in China in recent years.： I can&#;t tell the taste. The domestic price of this floor is more than yuan;Hirsch Howard,We hope these techniques will help simplify the plan for installing new floors.If you plan to renovate your house and add new floor elements, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.European and American countries call this kind of floor RVP (rigid vinyl plate), rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, with a thickness of about .mm transparent texture, strong adhesion, wear resistance and scratch resistance, and the wear-resistant coefficient can reach - revolutions.[]Needless to say, for a long time, the lacquered cloth market was occupied by low-grade unlined lacquered cloth produced in Taiwan and other overseas countries, giving consumers the wrong message that China&#;s quality is not up to standard. In fact, after the inspection of these, the surface wear-resistant layer is only .mm, which is made of poorly processed and Recycled PVC. It does not meet the national standards for plastic coiled materials at all,Hirsch HowardHow much is laminate floor, so its service life is short, not comfortable to use.The combination of hardness and softness.The wood floor in the living room should be made of boards without knots, cracks and mildew. Generally, Fraxinus mandshurica, camphor and teak are better, because their lines are beautiful and clear, and their texture is moderate.The laying method of wooden floor is not very difficult, but it is required to have a certain carpentry foundation.Firstly the wood board shall be processed into the length and width coordinated with the room size according to the room size, and the floor shall be cleaned before laying.When laying draw the center point and vertical and horizontal vertical lines of the room, and lay from the center to the four sides. glue and an appropriate amount of cement can be used for bonding between laths.Note that the glue must be coated evenly to avoid the warping of the plate.