Saint EtienneGrenoble,

Setting requirements: Drainage measures should be set up for the foundation of construction electric elevators to ensure smooth drainage.The connection method and angle between the wall bracket and the building structure should comply with the requirements of the user manual.Saint Etienne,When a suspension cage with a rated load capacity acts on the buffer at a speed greater than the rated speed of .m/s, the average deceleration of the suspension cage should not exceed g and the time when the peak deceleration exceeds g should not exceedThe safety notice board for construction electric elevators should be prominently placed on the hanging cage for the rated load capacity and rated number of passengers of the construction electric elevator. It is strictly prohibited to use construction electric elevators beyond the rated load capacity or rated number of passengers.Henzada, floorsModel Example: Hanging Cage Specification: LABSC/TDx Type I: ~ Type II: ~ Type V: ~ Technical Requirements: The load-bearing capacity of the foundation should be greater than P: P=(hanging cage weight+outer cage weight+total weight of guide rail frame+counterweight+load) x. (kN).Model Example: Hanging Cage Specification: LABSC/TDx Type I: ~ Type II: ~ Type V: ~ Technical Requirements: The load-bearing capacity of the foundation should be greater than P: P=(hanging cage weight+outer cage weight+total weight of guide rail frame+counterweight+load) x. (kN).Horizontal lead screw mechanical electricity

Installation and dismantling personnel and drivers should hold certificates to work.The use of fully autonomous electric elevators can create more benefits and ensure safety in all aspects.Setting requirements: For construction electric elevators with foundations installed on roof slabs,Saint EtienneMontecellio, or other lower suspended structures, the bearing capacity of the foundation support structure should be checked. Click here to download the construction technical information for free. Basic drainage facilities should be installed.Inspection requirements,The L distance depends on the selected wall mount model.In addition to ground protective fences, low level doors can be used. Low level doors should meet the following requirements: the height of the door should be between m and m. And there should be at least protective railings, a half height middle crossbar, and a toe board at least mm above the ground.The motor of the hydraulic guide rail lifting platform is set around the wellbore, occupying a relatively small area, improving the utilization rate of the wellbore area.

The use of a lifting platform as a tool for storing performance blankets, soft scenery, etc. In some theaters,Saint EtienneKalish, there is a soft scenery storage lifting platform located at an appropriate location on the stage for the storage of blankets, soft scenery, etc.High quality and low price,When the distance between the outer edge of the construction electric elevator and the edge line of the external overhead power line cannot meet the requirements in the table above, after the upper limit switch is triggered by the hanging cage, where L is the upper safety distance; V: Increase speedConstruction electric elevators outside the lightning protection rangeSaint Etienne,The safety distance between the outer edge of the upper part of the landing door and the moving parts of the electric elevator during normal operation should not be less than .m; If the rated speed is not greater than .m/s, the safety distance can be .m.Horizontal lead screw mechanical electricityImplementing multiple shifts of homework should fill in and submit records according to regulations.