Look at the substrate, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, and wood has been used since to years. However, imported floors, especially FSC certified plates, have strict restrictions on wood species, so wood base materials are better.The standard laminate floor surface should contain aluminum oxide wear-resistant paper. It has g, g, g, and even lower. It is directly sprayed with aluminum oxide on the decorative paper. The state stipulates that the surface wear-resistant revolution of the laminate floor for indoor use should be more than revolutions. Only the floor with g wear-resistant paper can meet the requirements. The wear-resistant revolution of g wear-resistant paperThe number of revolutions can reach -, or even lower than g. It is good if the number of revolutions directly sprayed with aluminum oxide can reach -. For those with low wear-resistant revolutions, the material cost is relatively low; because of its low wear-resistant degree, the tool cost during processing is also low. On the contrary, the cost is much higher if the number of wear-resistant revolutions is high.Mustasari,First, the price is cost-effective.The quality of solid wood composite floor is stable, not easy to damage and easy to use.Lvarden,Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor. It does not strike the ground keel. It only needs the ground leveling, and can also improve the building height.There is nothing in the world that is not hot, and so is the floor.No matter whether the SPC floor has shrinkage joints or not,MustasariAdvantages and disadvantages of laminate flooring, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, room size, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market, followed by the rise in the price of solid wood flooring in , the decline in total consumption output, and more fierce market competition. In particular, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore, China&#;s solid wood flooring field should re plan the overall goal of development prospects, adjust the development strategic concept, actively build a strong brand and promote the physical and mental health development trend of solid wood flooring.The construction of SPC floor installation works is very fast. There is no need for mixed mortar. The ground with good standard can be paved immediately and can be applied after hours. The ground is slightly weak. Only self leveling cement is needed to ensure that the height difference of the ground is within mm.

Secondly, choose the color you want.The first thing to look at is the tree species.The special use environment of ground temperature is not suitable for all solid wood flooring. Therefore, when selecting ground temperature solid wood flooring, it depends on whether the ground temperature solid wood flooring is within the selection range of ground temperature solid wood flooring.Of course, there are people who sell dog meat by hanging sheep&#;s head.Taking the hot floor of oak floor as an example, non-standard manufacturers may misunderstand consumers with non-standard names.Formal flooring enterprises usually display wood names Latin and other information on the back of the floor. Dirt elimination method: special decontamination oil can be used to wipe oil stains, paint and printing ink;If there are blood stains, fruit juice, wine and other dirt, you can wipe it with a wet towel or a towel dipped in an appropriate floor cleaning solution,MustasariHow about SPC stone plastic floor, and you can&#;t eliminate the wood floor with strong alkali caustic soda solution.Identify from the packaging.Customer first,Moisture content is one of the most important factors affecting the reliability of solid wood composite flooring. When purchasing solid wood composite flooring, consumers should know whether the moisture content of the floor meets the national industrial standards.Seventh, sound insulation and noise reduction.In order to better prevent excessive water from penetrating into the inner layer of wood floor when selecting floor cleaner, reduce excessive water as much as possible and dry the mop.In addition, when applying wax after cleaning the wood floor, spray wax agent shall be selected to make the wax easy to apply evenly.Wipe off too much oil with a soft cloth to avoid bright spots.Don&#;t rush to choose the wood floor coated with light wax, and dry it naturally at night.

We hope these techniques will help simplify the plan for installing new floors.If you plan to renovate your house and add new floor elements, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, with a thickness of about .mm, transparent texture strong adhesion, wear resistance and scratch resistance, and the wear-resistant coefficient can reach - revolutions.[]Honest management,Precautions for solid wood floor installation : prevent keel from drying. Technical floor repair wax.Secondly, the cracking of the paint surface of the wood floor has nothing to do with the wood floor itself, but the paint surface technology has nothing to do with it, or the long-term storm,Seventh, sound insulation and noise reduction.qualityHeadache, dizziness, fatigue, nausea, vomiting, nausea, chest tightness, shortness of breath, sore throat, stomach pain palpitation, shortness of breath, insomnia, weight loss, memory loss, autonomic nerve obstruction etc.Long term inhalation by pregnant mothers is likely to cause abnormal fetuses and even death.

A good paper cutter can be used to cut at will. In addition, it can be composed of raw materials with different colors. It is especially suitable for floor tile mosaic ground. It can be composed and matched at will. It makes full use of the intelligence of interior designers to achieve the most ideal practical effect of decoration design;It is enough to turn your ground into handicrafts, and your life and home into a temple of plastic art, full of plastic art atmosphere.priceFossa ,Rubber: rubber with poor toughness and stability. Skin allergy.Gibara,When using liquid spray waxing shake the container containing floor wax first and stir it fully and evenly.Before waxing the wooden floor of the whole room, local trial must be carried out in inconspicuous places such as corners of the room to confirm whether there are abnormalities.In order to prevent floor wax from polluting walls,Fossa Price of multilayer composite wood floor, skirting lines and furniture, the above parts must be covered with adhesive tape paper.Fully soak the floor wax with a clean rag. It&#;s best not to fall off.PVC floor has ordinary floor raw materials, which can not be compared with the actual effect of sound insulation, and its sound insulation performance can reach - sound shells. Therefore PVC floor is selected in the natural environment that must be quiet, such as hospital wards, school libraries, multi-al halls, cinemas, etc,You will no longer have to worry that the sound of high-heeled shoes and the ground will harm your logical thinking. PVC flooring can show you a more comfortable and personalized living environment.It is roughly divided into common solid wood flooring, reinforced composite wood flooring, bamboo flooring, high corrosion-resistant flooring, plastic flooring, antistatic flooring and outdoor stalls according to raw materials.According to the level of ecological environment protection, it is divided into European standard E and E floor, Japanese standard - F star floor regulated by JAS star, etc.E, which is often referred to by Chinese manufacturers, but there is no name of E in European standards.

Compared with laminate flooring: pattern non laminate flooring.Comparison with solid wood flooring: strong glue must be selected for the production of solid wood composite flooring. Unlike the traditional solid wood flooring, only the wood itself is basically with glue.Although the environmental protection quality of super glue is very high, and the formaldehyde concentration can be basically ignored, it still exists.The utility model has the advantages of convenient installation and maintenance, solid wood composite floors mostly use adhesives with low formaldehyde emission, and good environmental protection effect.Fourth, it is mainly the veneer thickness (decorative board thickness). The multi-layer solid wood floor has ,-, and the new three-layer solid wood floor has , to , mm.Analysis projectThe surface texture of solid wood floor is clear and natural, and there is no obvious color difference on both sides.Medium and low grade solid wood floors indicate that cracks may occur.If the crack is not a problem between textures, there will be some hidden dangers if the crack passes through the texture.The double composite solid wood floor adopts double-layer solid wood pressing. It feels like pure natural wood. The installation and maintenance is very simple. It is suitable for floor heating,Fossa Geothermal heating floor, beautiful and generous, good reliability, and contains a small amount of indoor formaldehyde.SPC floor is an excellent raw material with the advantages of wear resistance, low carbon and environmental protection.It is widely used in various indoor places.Including diagnosis and treatment, sports culture, colleges and universities culture and education, kindergartens, business services, offices, etc.The shadow of SPC floor can be seen.

When laying wooden floor, pay attention to the length and direction of the floor consistent with the entry direction to ensure good visual effect.First, choose the brand you need (i.e. grade);Welcome calls ,After - floors are assembled on the flat ground, observe whether the processing accuracy is flat and smooth, whether the tenon and groove bite is appropriate, not too loose or too tight by hand and eye observation.At the same time, carefully check the assembly height difference and gap between floors. Check whether there is sand on the ground and carry out curing treatment in time.Third, it is flame retardant, but it can&#;t be burned.Fossa ,Generally, the plate has a certain degree of expansion, so some gaps (.mm is appropriate) should be left between the laths during splicing to avoid arching.If the floor of the room is uneven, it can be paved with wooden keel for leveling, extraordinary, clean and warm.A short wooden floor strip has been launched in the market, which can be combined freely according to the size of the room, and can be assembled into a variety of patterns at will.This kind of short plank is more practical, but the disadvantage is that the cost is not low.If the floor is made of wood, the wallboard can also be decorated with plates, so that the overall structure of the room tends to be unified.Wall panels can be used as whole wall paneling or only as dado paneling.Wood wallboard is the best for large wallboard concrete wall. It can directly fix the board to the wall with adhesive.If the white ash interior wall of brickwork structure is decorated with wallboard, it shall be fixed for minutes first×mm vertical wood wall reinforcement, and then fix the plate to the wood wall reinforcement with wood screws.Family decorative wallboard is best based on plywood and its strength is appropriate.Then stick wood veneer on its surface to make up for the deficiency of plywood pattern.After the veneer is pasted, apply one or two layers of matte paint, and the pattern of the wallboard will be clear and beautiful, smooth and three-dimensional.Wood floor and wood wallboard interweave, making the style of the whole room unified, both simple and elegant.On the basis of uniform color or reasonable interweaving it can make the whole room comfortable and soft, and give people an indescribable sense of mystery.Introduction of floor leatherThe wide board specification was invented by China&#;s laminate flooring processing enterprises in order to meet consumer demand. Its advantages look generous, and there are relatively few gaps in the floor. Most of them are thickened, that is, about mm. Generally, the decorative paper on the surface is made in China, which is more flexible. The disadvantage is that the color difference is relatively large, and the anti ultraviolet ability of the decorative paper is poor. SPC floors are subject to biological resistance treatment, and the unique sealing of the surface layer makes the products have the characteristics of anti bacteria and antibacterial, and meet the cleaning requirements of various departments and institutions.When it comes to the choice of decoration flooring, you can think of ceramic tile, marble and wood flooring. However, SPC flooring has become the first choice for people to buy Flooring in developed countries and regions such as Europe, America, Japan and South Korea, and the domestic market is gradually accepting SPC flooring. Why SPC flooring is popular? First of all, what is SPC flooring and how about SPC flooring,Fossa How thick is the floor leather,Now let&#;s learn what SPC floor is and how SPC floor is.SPC is the abbreviation of stone plastic composites (stone plastic composites). The main raw material is polyvinyl chloride resin. It is made by extruding SPC substrate by extruder combined with T-shaped die, and heating, laminating and embossing PVC wear-resistant layer, PVC color film and SPC substrate by three roll or four roll calender at one time. Glue is not used in the production process.

The crystal surface is basically flat. It&#;s easy to take care of and clean up.Eighth, antimicrobial activity.Mansara, Check the hardness of the foundation ground. SPC floor has special anti-skid property. The more it meets water, the more astringent it is. Even if you wear running shoes with nails, you won&#;t leave scratches on the floor.Pokrovka, SPC floor has strong impact resistance, impact damage to suspended objects and strong ductility repair. In terms of foot feeling, solid wood is better than reinforcement. According to national industry standards, all solid wood is mm thick, and wood keel ceiling is selected for installation, so the upper foot is better than mm thick reinforcement plate.How to distinguish true and false solid wood flooring? Produce gene mutation effect.

A foot pad shall be placed in front of the door to reduce the wear of sand on the floor.Moreover, most artificial boards use urea formaldehyde resin as the adhesive. The main component is formaldehyde, and residual formaldehyde is inevitable.The environmental protection grade of domestic flooring is divided into E, E and E Only the flooring reaching grade E has a formaldehyde emission of no more than mg/l, which meets the requirements of national standards.Defects of solid wood composite floorwholesaler, Good fire resistance.In case of large-scale immersion or partial long-term immersion in water accidentally, if there is any leveling stay,MansaraHow thick is the floor leather, it shall be immediately sucked away with a dry rag and allowed to be dry. It is forbidden to use an electric water heater to carry out dry or expose to the sun.The construction of SPC floor installation works is very fast. There is no need for mixed mortar. The ground with good standard can be paved immediately and can be applied after hours. The ground is slightly weak. Only self leveling cement is needed to ensure that the height difference of the ground is within mm.

Defects.knowledgeLaminate flooring has rich colors and patterns, which fully meet the needs of personalized design. There are many varieties of designs and colors, and the designs and colors are fashionable. It can simulate all kinds of natural or man-made patterns.The decorative layer of laminate floor is generally imitated by computer, and even imitate stone and create unique patterns that are not found in nature.If the scratch is shallow and the paint layer on the surface of the solid wood floor is not damaged, it can be polished with polishing paste immediately after the floor is cleaned.Because the polishing paste is mainly to maintain the luster of the floor and make the surface of the solid wood floor more and more smooth, it is not easy to cause deeper damage to the scratch area,MansaraTips for cleaning laminate flooring, and the scratch can also be repaired. LookMansara, High cost performanceThe surface is treated with special technology, without air holes and water impermeability. It is no problem to shop in the areas where toilets and kitchens communicate with water.No, it will not be like the ordinary wooden floor. Once it bubbles it will deform and bubble, or it will become moldy due to high humidity.Select well-known brands;

It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring: Whether to renovate the board.Celingawi,In the process of laying plastic floors in kindergartens, details determine success or failure. When installing plastic floors, we should pay attention to the details of all links of laying and do not have luck.Otherwise, the application effect of plastic floor can not be brought into full play, and the service life will be reduced.In some new houses, the road surface is fully covered with wooden floors, but over time, the wooden floors are very easy to deform, curl edges and are not waterproof. Now such raw materials are popular abroad especially in the real indoor formaldehyde, which is not deformed. No wonder they are popular ~.Molded plate: a remarkable feature of molded plate is that there is an arc depression on the upper edge of the plate. After the two plates are assembled, but there is a small groove, which is called U-shaped groove in the industry. In most cases, this kind of plate is reinforced floor.One of the great advantages of the molded plate is that it is easy to clean. It is very convenient to clean the dust in the small ditch, as long as you wipe it with a rag or mop.Greece,When assembling the solid wood floor, do not be too loose or too tight.The assembly relaxation shall be reasonably arranged according to the temperature of the indoor environment. The assembly relaxation will produce a large gap with the shrinkage of the floor.The assembly is too tight and the floor is arched when it expands.SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, so the length of the small section of a roll of floor paint cloth with sections shall be indicated, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, observe whether there are cracks it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally,CelingawiHow to deal with uneven floor leather, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.Laminate flooring is a product with high scientific and technological content. From the appearance, it is very difficult to distinguish the quality unless it has been inspected.Therefore, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, in the future, the service is guaranteed. If you buy it at ease, you can also avoid worries at home.Maybe the cheap floor can be or yuan cheaper than the brand floor per square meter, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee.

Third, the processing technology is highly regulated;Its structure is complicated, its quality varies greatly, and its essential quality is not easy to distinguish; Check the flatness and damage of the self leveling ground. After days, maggots appeared on the floor.This problem is because the floor contains a lot of impurities.Professional is king,There is nothing in the world that is not hot, and so is the floor.No matter whether the SPC floor has shrinkage joints or not, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, room size, winter and summer temperature, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market, followed by the rise in the price of solid wood flooring in , the decline in total consumption output, and more fierce market competition. In particular, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore, China&#;s solid wood flooring field should re plan the overall goal of development prospects, adjust the development strategic concept, wipe it gently with a rag to clean it easily, leaving no marks that are difficult to remove, and there is no need to maintain it with special maintenance products.

After - floors are assembled on the flat ground, observe whether the processing accuracy is flat and smooth, whether the tenon and groove bite is appropriate, not too loose or too tight by hand and eye observation.At the same time, carefully check the assembly height difference and gap between floors.Fair price,sound insulationIn addition to the above three, there are now bamboo floors and cork floors, but they are rarely used in families, so there is no need to consider them.Don&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness,CelingawiLaminate floor thickness, and too much application will lead to poor film formation.Keeping thin and uniform is the key to waxing.Do not dilute the floor wax with water.Solid wax must be ground after polishing.Celingawi,Eleventh the classification is diverse; From the characteristics of the floor, relief surface it is divided into crystal surface,CelingawiCleaning and maintenance methods of wood floor at home, latch, silent, waterproof and so on. I like to choose soft floor leather

The internal humidity can not be very high to maintain the dryness and smoothness of the floor. The daily cleaning can be wiped with a dry cotton mop: if it is difficult to remove dirt it should be wiped with a neutral cleaning organic solvent and then wiped with a dry cotton mop. Do not wipe with acid, Check whether there is sand on the ground and carry out curing treatment in time.Third, it is flame retardant, but it can&#;t be burned.Brikama,The laminate floor is composed of wear-resistant layer, decorative layer, base material and balance layer.The wear-resistant layer, decorative layer and balance layer are manually printed, and the base material is made of fast-growing forest materials. The cost is lower than that of solid wood flooring. At the same time, and the relative cost performance is high.Due to the different base materials the price difference is obvious, and there is more room for customers to choose, which is suitable for people at all levels.The fire rating reaches B, which is unmatched by ordinary floors.Therefore, many public spaces are also paved with SPC floors, that is to say, this reason.Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor. It does not strike the ground keel. It only needs the ground leveling, and can also improve the building height.

priceSecond, mild to moderate scratches.Stability: completely disperse the original wood mechanism,HorolaFloor paint, destroy the characteristics of various wet expansion and contraction, and the specification is very stable, especially for rooms with heating system.Test results, hand grasping pattern, pair pattern, mirror pattern).Narrow board specifications are also China&#;s characteristics. Solid wood flooring looks generous, too expensive and has poor stability; China&#;s flooring manufacturers make imitation solid wood flooring. Looking at its specifications as solid wood flooring, it is cheap and stable. The four sides are made into V-grooves, which can really confuse the fake with the real, and the thickness is basically about mm. It has been implemented in the market for less than a year and is very popular.When selecting accessories we should also consider the cost. We should select thin or narrow right angles and strips, which virtually limits the shrinkage space and causes unnecessary losses.

SPC vinyl flooring manufacturers focus a lot on the dense core of SPC flooring.They tried to make it more resistant to shrinkage.Click to view, Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor, without keel. As long as the ground is flat,HorolaWaterproof laminate floor, the building height can be improved.In addition, due to the simple installation regulations, the safety hazards caused by installation are also greatly reduced.Solid wood flooring has high environmental protection, health and comfort, and is deeply loved by many small partners.Solid wood flooring has many advantages, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor?The utility model has the advantages of convenient installation and maintenance, solid wood composite floors mostly use adhesives with low formaldehyde emission, and good environmental protection effect.Seventh, sound insulation and noise reduction.Horola,Second, soak in water.In fact, of the inspection indexes of floor leather, such as wear resistance,HorolaAdvantages and disadvantages of laminate flooring, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.The fire rating reaches B, which is unmatched by ordinary floors.Therefore, many public spaces are also paved with SPC floors, that is to say, this reason.

Fifth, strong ground anti-skid. Anti slip, more astringent in case of water, not easy to fallKarina,If it is really serious or the actual recovery is not satisfactory, we must remove and replace the floor, find technicians to solve it, take out the seriously damaged wooden floor and remove it.There is nothing in the world that is not hot, and so is the floor.No matter whether the SPC floor has shrinkage joints or not, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, room size, winter and summer temperature, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market followed by the rise in the price of solid wood flooring in , the decline in total consumption output, and more fierce market competition. In particular, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore, China&#;s solid wood flooring field should re plan the overall goal of development prospects, adjust the development strategic concept, actively build a strong brand and promote the physical and mental health development trend of solid wood flooring.Laghouat,What is the difference between solid wood flooring and solid wood composite flooring?Solid wood flooring is made of natural wood materials,KarinaWhich is better, laminate floor or wood floor, which is integrated without production and processing. Of course, it accepts the unique characteristics of wood, which is easy to arch and deform.Production and processing of composite flooring is generally not easy to happen.In case of large-scale immersion or partial long-term immersion in water accidentally, if there is any leveling stay, the temperature is close in four seasons. When walking on the wood floor, stone grain and carpet grainColor film layer: various decorative layers of wood grain, which can meet the different needs of different occasions and different tastes. The packaging is rough, the printing quality of the publicity album is poor, the attributes are pieced together and the slogan selling points are set by set, which often misappropriates the album attributes of large companies.In order to prevent local fading due to frequent sunlight exposure, it is best to hang curtains to turn direct light into diffuse light, which is conducive to prolonging the service life of the floor. Pay attention to the fact that hard substances such as metal sharps and shoe staples are easy to scratch the surface of the worn lacquer cloth. Avoid cigarette butts, boiled water and hot objects above ℃ from directly contacting the plate surface. Prevent burning marks and scalding marks. Do not press the surface with rubber pads for a long time,In case of indentation, it is difficult to remove. Although the ground lacquer cloth is flame-retardant and self extinguishing, it will decompose harmful gases at high temperature, which will suffocate if inhaled too much. First, pursue foreign goods

Wear resistance, wear resistance Grade TTrustworthy,KarinaIs floor leather expensive,XIII. Convenient maintenance.In addition to the above three, there are now bamboo floors and cork floors, but they are rarely used in families, so there is no need to consider them. It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo,KarinaWhich is better, laminate flooring or solid wood laminate flooring, ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring:Karina,Structure: it is made of pure solid wood from inside to outside, which is often made of pine

High cost performance. Whether to renovate the board.Hamina,The sports wood floor brings people close to the vitality of nature and can meet modern people&#;s yearning for green sports life. The wood board is full of vitality, can support people, full of natural flavor and make the moving wood space full of vitality.Then look at the qualityShenyang,First, look at environmental protectionThe application and marketing promotion of PVC latch floor in China has a history of ten years. From the early stage,HaminaCeramic tile or wood floor?, it has entered institutions and institutions such as colleges and universities, hospitals and outpatient departments in China, mainly LVT latch floor (thin thickness, the key is mm) and WPC latch floor (ordinary thin thickness: mm, mm). SPC floor is a new product in recent five years. Most LVT / WPC are made of steam pressure,Customized delivery time up to days.However, SPC floor can be formed by integrated extrusion process, and the delivery time can be shortened several times. Dirt elimination method: special decontamination oil can be used to wipe oil stains, paint and printing ink;If there are blood stains, fruit juice, red wine, wine and other dirt,HaminaDalian plastic wood flooring, you can wipe it with a wet towel or a towel dipped in an appropriate floor cleaning solution, and you can&#;t eliminate the wood floor with strong alkali caustic soda solution.Identify from the packaging.

There is nothing in the world that is not hot, and so is the floor.No matter whether the SPC floor has shrinkage joints or not, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, room size, winter and summer temperature, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market followed by the rise in the price of solid wood flooring in , the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore and more fierce market competition. In particular, adjust the development strategic concept, actively build a strong brand and promote the physical and mental health development trend of solid wood flooring. No cracks, cracks and dents. Method of forging solid wood floorresources,The fire safety performance of SPC floor and homogeneous transparent waterproof coiled material floor shall meet the national industry standard gb-b, only second to marble.The main raw material of SPC floor is polyvinyl chloride. Polyvinyl chloride is an environment-friendly, non-toxic and renewable resource. It has been widely used in people&#;s daily life, such as tableware and medical infusion pipe bags. Its environmental protection does not need to be worried.SPC floor (sheet) is mainly composed of natural stone powder, which does not contain any radioactive elements after testing by national authoritative departments. It is a new green and environmental protection ground decoration material.Compared with laminate flooring: pattern non laminate flooring.Comparison with solid wood flooring: strong glue must be selected for the production of solid wood composite flooring. Unlike the traditional solid wood flooring, only the wood itself is basically with glue.Although the environmental protection quality of super glue is very high, and the formaldehyde concentration can be basically ignored, it still exists.

Maintenance method editing voicediscountFrom the front, the relief surface is no different from the crystal surface. From the side, touch it with your hand, and there are wood grain patterns on the surface.Disadvantages of reinforced composite wood floor.When laying wooden floor, pay attention to the length and direction of the floor consistent with the entry direction to ensure good visual effect.First, choose the brand you need (i.e. grade);Hamina,In order to better prevent excessive water from penetrating into the inner layer of wood floor, when selecting floor cleaner, reduce excessive water as much as possible and dry the mop.In addition, when applying wax after cleaning the wood floor, spray wax agent shall be selected to make the wax easy to apply evenly.Wipe off too much oil with a soft cloth to avoid bright spots.Don&#;t rush to choose the wood floor coated with light wax, and dry it naturally at night.Many people think WPC floors are thick and therefore durable.OK, it&#;s a durable floor, but no more than SPC floor.Compared with WPC flooring, SPC flooring has good density.The higher density makes them resistant to damage and heavy weight.They will not be affected by the falling or moving of heavy objects.Therefore, SPC is considered to have good durability.There is nothing in the world that is not hot, and so is the floor.No matter whether the SPC floor has shrinkage joints or not,HaminaWhat does floor leather look like, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, room size, winter and summer temperature, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market, followed by the rise in the price of solid wood flooring in , the decline in total consumption output, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore China&#;s solid wood flooring field should re plan the overall goal of development prospects, actively build a strong brand and promote the physical and mental health development trend of solid wood flooring.

The combination of hardness and softness.The wood floor in the living room should be made of boards without knots, cracks and mildew. Generally, Fraxinus mandshurica, camphor and teak are better, because their lines are beautiful and clear, and their texture is moderate.The laying method of wooden floor is not very difficult, but it is required to have a certain carpentry foundation.Firstly the wood board shall be processed into the length and width coordinated with the room size according to the room size, draw the center point and vertical and horizontal vertical lines of the room and the floor shall be cleaned before laying.When laying, and lay from the center to the four sides. glue and an appropriate amount of cement can be used for bonding between laths.Note that the glue must be coated evenly to avoid the warping of the plate.The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.Ilojarvi, decorative design layer, high-density board layer and balance (waterproof) layer. A large amount of mixed glue is added to the lining.If the glue used by the manufacturer fails to pass the test, there will be formaldehyde. The reinforced composite floor is wrapped with high-rise plastic film to ensure that formaldehyde remains inside.However, when the temperature is constantly changing and applied,IlojarviMultilayer solid wood floor, formaldehyde will leak into the air. Wear resistance level.BremenThe core layer of WPC wood floor is thicker than that of SPC floor.WPC boards range from to mm, while SPC boards range from to mm.For long-term indoor use,IlojarviSolid wood composite solid wood floor, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, which gives people an elegant feeling. If you want to use them for short-term use or one-time cover, you can choose low-grade products, because the price of low-grade products is low,IlojarviBenefits of wood flooring, there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials, namely wear-resistant layer, decorative layer, high-density substrate layer and balance (moisture proof)Laminate floor is also called impregnated paper laminated wood floor and laminate floor. Qualified laminate floor is made of one or more layers of special impregnated thermosetting amino resin.Third, it is flame retardant, but it can&#;t be burned.

Fourth, after-sales maintenance service.Generally, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation, so we must choose a professional installation teacher to install it.What kind of floor is good for bedroom design? After the primer is dry, brush the first finishing coat and dry it.Laminate flooring reaches grade B and has higher flame retardant performance, which is safer than other kinds of wood flooring.First, low carbon and environmental protection.Equipment maintenance, The construction of installation works is convenient.From the front, the relief surface is no different from the crystal surface. From the side, touch it with your hand, and there are wood grain patterns on the surface.Laminate flooring is suitable for meeting rooms, offices, high-definition cleanliness laboratories, etc. it can also be used for the ground decoration of medium and high-grade hotels, restaurants and civil houses.Although laminate floor has moisture-proof layer, it should not be used in wet places such as bathroom and toilet.The first is the type of raw material.When purchasing solid wood multi-layer wood floor, you should pay attention to whether the floor is the same material and whether the surface has defects such as crack, rot, skin clip, moldy and so on.The general high-quality solid wood multi-layer wood floor shall have clear lines and bright colors on the surface.

SPC floor surface will not have holes and water seepage;There will be no seams after splicing. After being stained, wipe it gently with a rag to clean it easily, leaving no marks that are difficult to remove, and there is no need to maintain it with special maintenance products.Finance Department,The meaning of brand is by no means limited to the popularity of the enterprise.A mature and successful brand does not have strength and popularity, but forms a strong psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers. It is bred in the eyes of consumers by many factors, such as the accumulation of time, which is a guarantee for consumers.Therefore, when consumers choose products, they&#;d better choose big brands to get better guarantee of quality, service and so on.The formaldehyde emission of pure solid wood floor is very small. If the budget is sufficient, it is recommended to use pure solid wood floor.Secondly, the cracking of the paint surface of the wood floor has nothing to do with the wood floor itself but the paint surface technology has nothing to do with it, or the long-term storm, the drying shrinkage of the wood floor and the cracking of paint wrinkles.Ilojarvi,If the cracks on the surface of the wooden floor are not serious, or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, flattening the cracked part of the floor and repainting it. Dirt elimination method: special decontamination oil can be used to wipe oil stains, paint and printing ink;If there are blood stains, fruit juice, red wine, wine and other dirt, you can wipe it with a wet towel or a towel dipped in an appropriate floor cleaning solution, and you can&#;t eliminate the wood floor with strong alkali caustic soda solution.Identify from the packaging.The color is gorgeous, the texture is clear and the pattern gives people a beautiful feeling.It not only has axial drilling texture, but also has irregular thick and light parallel lines for wood texture, with clear and smooth texture and a sense of hierarchy;There are also rotary drilling textures. The wood texture also has mountain or wavy lines. The texture is beautiful, fluctuating and cool.

： Pungent taste if it is the floor with this taste, it means that it contains a lot of formaldehyde. Be careful when choosing, and you&#;d better not buy it;The surface layer of laminate floor is a wear-resistant layer, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, corrosion resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.Hula,Regulation effect: wood has certain moisture absorption performance. After indoor decoration with dry wood, the air humidity is too high, and the wood absorbs part of the moisture from the air. On the contrary, which has a certain regulation effect on the indoor relative humidity and gives people a comfortable environment.According to the measurement, in the houses decorated with wood,HulaFloor selection, the temperature is low in summer and warm in winter.advantageConstanza,In addition to the high wear-resistant solid wood floor, the electronic organ architectural coating floor is also the main product in the recent popular sales market.Beautiful and bright appearance, with super thick wear-resistant layer,HulaSPC floor production line manufacturer, the actual effect is brighter and deeper, and the upper foot is stronger. The appearance is very similar to the solid wood floor, but the price is far less than the solid wood floor.The solid wood composite floor is overlapped and laminated by the boards of different greening plants, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small, the specification stability is good, and the wood texture and comfortable feet of the solid wood floor are preserved.Impregnated paper laminated wood floor is a floor made of one or more layers of special paper impregnated with thermosetting amino resin, which is paved on the surface of wood-based board substrate such as particleboard and high-density fiberboard, with a balanced moisture-proof layer on the back and a wear-resistant layer and decorative layer on the front. It is hot pressed and formed. First, offices, etc. it can also be used for the ground decoration of medium and high-grade hotels, restaurants and civil houses.Although laminate floor has moisture-proof layer, it should not be used in wet places such as bathroom and toilet.The first is the type of raw material.When purchasing solid wood multi-layer wood floor, you should pay attention to whether the floor is the same material and whether the surface has defects such as crack, rot, skin clip, dead joint, moth eaten moldy and so on.The general high-quality solid wood multi-layer wood floor shall have clear lines and bright colors on the surface. Wear resistant.SPC floor adopts special transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach more than revolutions.The wear-resistant laminate floor in traditional flooring materials has only - revolutions. Super durable.The surface of stone plastic floor has a special transparent wear-resistant layer processed by high technology, which is super wear-resistant.Therefore, stone plastic flooring is becoming more and more popular in hospitals, schools, office buildings, shopping malls, vehicles and other places with large flow of people.Where can I find it?Waterproof: apply waterproof resin or other waterproof materials at the tongue and groove of the laminate floor, so that the moisture and moisture outside the floor are not easy to invade and the formaldehyde inside is not easy to release, so that the environmental protection and service life of the floor are significantly improved;Especially when laying in a large area it is inconvenient to leave expansion joints and compression strips, it can prevent floor arching and reduce floor contraction joints. In terms of foot feeling, solid wood is better than reinforcement. According to national industry standards, all solid wood is mm thick, and wood keel ceiling is selected for installation, so the upper foot is better than mm thick reinforcement plate.How to distinguish true and false solid wood flooring? If the address cannot be used temporarily,HulaWaterproof laminate floor, the indoor air quality and commodity circulation shall be maintained and it shall not be covered with plastic boxes or newspapers, so as to prevent the long-term surface paint layer from becoming sticky and dull.

Headache, dizziness, fatigue, nausea, vomiting, chest tightness, shortness of breath, eye pain, sore throat, stomach pain, palpitation, shortness of breath, insomnia, weight loss, memory loss, autonomic nerve obstruction, etc.Long term inhalation by pregnant mothers is likely to cause abnormal fetuses and even death.Packaging strategy, High cost performance.Olfactory effect: all kinds of wood often give off a particularly pleasant smell. They are used to fenduojing. After experiments, these gases can sterilize and kill insects, calm nerves and produce health care effects on human health.Compared with wood flooring, first wood flooring is more environmentally friendly, durable and has a long service life. Wood flooring is processed from natural wood, which is more environmentally friendly than artificial floor leather, and the service life of wood flooring is up to years.Second, the decorative effect is not as real and natural as the wooden floor. The wooden floor is hard and soft and it is not easy to dust, giving people a high-level decoration effect and a sense of solemnity unmatched by other materials.Third: wood flooring is more precious than floor leather. Because it is derived from natural forest resources, it has a certain artistic value after precision processing, which brings more choices for home decoration.Brand introduction of floor leatherHula,Chamfering rolling paint: a processing technology, which cuts off some of the upper edge of the floor, and then applies paint to cover the color of the substrate, so that the edge color has a sense of hierarchy, which is similar to the solid wood floor, so it is deeply loved by the majority of consumers.After the chamfered and painted board is paved, there is a very shallow small seam on the upper edge between the board and the board, which is easy to accumulate dust and inconvenient to clean.There is no such problem for boards without chamfering.We hope these techniques will help simplify the plan for installing new floors.If you plan to renovate your house and add new floor elements, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.European and American countries call this kind of floor RVP (rigid vinyl plate), rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, with a thickness of about .mm, transparent texture, strong adhesion, wear resistance and scratch resistance, and the wear-resistant coefficient can reach - revolutions.[]Seventh, sound insulation and noise reduction.

The biggest highlight is that they are not afraid of water and shop willfully anywhere. Common floor types:Kangasala, Look at the details.Lies are angels, details are demons.Take the product leaflet page,KangasalaWhat does the balcony floor shop look good and waterproof,KangasalaLaminate floor thickness, which is the most used promotional material by agents, as an example, from copywriting, design,KangasalaSPC floor direct selling, printing, paper to regional market consultation telephone and distribution address.If there are irregularities and inconsistencies, we should pay more attention.Visual effect: the wood has beautiful texture and various colors. It can effectively absorb ultraviolet rays harmful to human eyes, the wear resistance is not as thick as that of reinforced composite floor and double-layer composite floor;Novi Pazar,Note edit voicePrecautions for solid wood floor installation : avoid the inconsistency between the length direction of the floor and the entrance direction. Identify from the package

The real wood floor is processed with a whole plate, with natural texture, so the cut texture is not commensurate with the surface texture.Briefly describe several common wood varieties: After days, maggots appeared on the floor.This problem is because the floor contains a lot of impurities.Respect for customers, Solid wood flooring. Wear resistance, wear resistance Grade T Anti slip more astringent in case of water, not easy to fall

We can also scrape the board with a blade.The real solid wood floor is painted with wood, and the refurbished board is made of floor white putty and paint.Scrape the surface with a blade. If it is white, it is a refurbished plate.How to choose the floor?What is the difference between solid wood, composite and reinforced?Create brilliance, Soak in waterDuring the test of solid wood floor in the factory, if some wood floors are found to be warped or falling off, the wood floor shall be taken out immediately the old glue or ash chips shall be removed, glued and tamped.However, from the perspective of installation method, laminate floor, multi-layer floor and ordinary flat buckle solid wood floor belong to disposable floor, because they must be fixed with nails or glue and cannot be reused.With the unique tiger Tenon Technology of Tiange floor, it can realize glue free, nail free and dragon free during installation, so that the floor can be disassembled, installed and used repeatedly.For example, in case of water immersion and other accidents, you can also remove the floor and reinstall it in a new home. For the floors of some precious tree species such as teak, this is very important, because the logs are more and more precious, and the floor can maintain and increase its value.Kangasala, I like to choose soft floor leather About strengthening the floor.Precautions for solid wood floor installation : prevent keel from drying.

Characteristics of fake and shoddy laminate flooringFinally, the internal rupture of the wooden floor is related to the quality of the logs of your choice. Generally, such problems rarely occur.How to deal with cracks in wooden floors.Vihti,Three layer solid wood floorIn case of large-scale immersion or partial long-term immersion in water accidentally, if there is any leveling stay, it shall be immediately sucked away with a dry rag and allowed to be dry. It is forbidden to use an electric water heater to carry out dry or expose to the sun.Maribor,Advantages: of course, the grain is comfortable, flame retardant moisture-resistant corrosion-resistant, and the maintenance is better than that of solid wood.Suitable soil temperature, can also be paved in the kitchen. The internal humidity can not be very high to maintain the dryness and smoothness of the floor. The daily cleaning can be wiped with a dry cotton mop: if it is difficult to remove dirt, it should be wiped with a neutral cleaning organic solvent and then wiped with a dry cotton mop. Do not wipe with acid, so you&#;ll feel comfortable under your feet.Great stability.When you walk on the floor you will feel that it has been buffered.The thickness of the floor has good thermal insulation, so the floor will remain warm in the cold season.Good laminate flooring has high density, fine and uniform cross-sectional texture,VihtiHow to solve the creak on the wooden floor, small and compact particles. Poor quality laminate flooring has large and sparse cross-sectional particles and very rough surface. Again weigh its weight by hand. Due to high density, good solid wood laminate flooring also has a heavy hand feeling.What is their price level?The price of reinforced wood floor is generally between - yuan. If it is engineering plate, it will be cheaper.But the price is also related to well-known brands. If it&#;s family decoration, it&#;s better to choose a better one.Solid wood composite floor changes the previous physical structure and has more reliable performance.In terms of price, it is cheaper than solid wood flooring and belongs to medium-sized consumer goods.Pavement building decoration materials are popular materials in family decoration at this stage.Generally speaking, floors between yuan / m and yuan / m are better.supply,Second, specifications and models.When purchasing solid wood multi-layer wood flooring, many customers like to choose wide and long double-layer solid wood flooring. They feel that the really raised flooring looks level and atmospheric at home.In fact, the longer the better the floor, it will endanger the reliability of double-layer solid wood floor.The length and total width of solid wood multilayer wood floor should be short, not suitable for long, narrow, not suitable for wide.However, from the perspective of installation method, laminate floor, multi-layer floor and ordinary flat buckle solid wood floor belong to disposable floor, because they must be fixed with nails or glue and cannot be reused.With the unique tiger Tenon Technology of Tiange floor, it can realize glue free, nail free and dragon free during installation, so that the floor can be disassembled, installed and used repeatedly.For example, in case of water immersion and other accidents, you can also remove the floor and reinstall it in a new home. For the floors of some precious tree species such as teak, this is very important, because the logs are more and more precious,VihtiBenefits of laminate flooring, and the floor can maintain and increase its value.The cross-section of the floor is rubbed with a file to generate heat in the cross-section,VihtiSupermarket wooden floor, and formaldehyde is fully volatilized (formaldehyde is accelerated at more than degrees, and you can smell the pungent smell at the same time). At this time, you can smell, generally you can smell three different levels of smell

In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.Excellent service,Eighth, antimicrobial activity.Log color floor looks more natural and has an elegant feeling. It is a common floor color in home decoration.Ash wood floor is closer to the natural color, a variety of furniture styles, warm and natural, and can also improve the indoor brightness. Fire protection: the fire rating of SPC floor is B, second only to stone. It will automatically extinguish after leaving the flame for seconds, non spontaneous combustion, and will not produce toxic and harmful gases.It is suitable for occasions with high fire protection requirements.Vihti,The core layer of WPC wood floor is thicker than that of SPC floor.WPC boards range from to mm, while SPC boards range from to mm.Physical and mental health floor is the floor produced according to the production and manufacturing product quality standards and installation and application testing standards (double specifications), which is not easy to cause harmful substances and ensure the health and safety of residential gas.Second, sticky man is thin.

The double composite solid wood floor adopts double-layer solid wood pressing. It feels like pure natural wood. The installation and maintenance is very simple. It is suitable for floor heating, beautiful and generous, good reliability, and contains a small amount of indoor formaldehyde. The conventional thickness is only -mm. The ultra-thin design is a bold innovation in the professional industry. The surface is printed with materials to improve the service life of people flow field. The surface imitates the real wood texture and natural marble texture. In view of the characteristics of raw materials, it has fast heat conduction and long heat storage duration. It is the preferred floor for floor heating.Saulina,High quality flooring shall be made of high-quality materials, which shall be natural, high-density and moderate.Some people think that the higher the density of wood-based panel, the better. In fact, the higher its water absorption and expansion rate is, which is easy to cause floor deformation.Second, rely on advanced floor production lines, equipment and strict technology to produce first-class floors.The judgment of floor quality can also be judged from the quality inspection certificate, other honorary certificates such as national quality inspection free products, ISO quality system certification and ISO environmental system certification, because the acquisition of these honors will inevitably lead to the fine operation of the enterprise.In today&#;s building materials industry, there are many incidents of profiteering and even damaging the interests of consumers. The bad atmosphere has led to the reduction of consumer trust.The price is in a state of confusion and consumers are confused. They don&#;t know whether their pay is worth it. Therefore, they all want to know that there is a relatively transparent price.CeadarLunga,SPC floor has a variety of colors, such as blanket pattern design, stone pattern design, wood floor pattern design, etc.,Even be able to complete personalized customization.The wireframe is real, beautiful and generous. Equipped with a variety of accessories and decorative design strips it can integrate the practical effect of beautiful and generous decorative design.Now we have VSPC flooring, which makes the floor tone milder and feel more comfortable. The construction of installation works is convenient. Water resistance

High price performance price ratio: because of its unique structural connection, the regulations on wood are not too high and raw materials can also be used flexibly, so the price is much lower than that of solid wood flooring.Moreover, families with laminate floors should also pay attention to the removal methods of daily indoor formaldehyde.The usual practices are: Open windows for ventilation to let the polluted air spread at any time; Place green plants in the house to let the plants absorb formaldehyde; Use a purifier, such as anion, to filter formaldehyde; Use chemical collectors, such as formaldehyde collectors, to neutralize formaldehyde.Using these methods,SaulinaAdvantages and disadvantages of reinforced composite wood floor, you can minimize the formaldehyde content in your room.Let&#;s look at environmental protection first.SPC floor has a thickness of mm-mm, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time,SaulinaWhen is laminate flooring, wear resistance grade t.Applicable part editing voice Remove the pavement and remove dust to avoid the accumulation of crushed stones or friction coefficient floating dust on the floor surface.The shoe sole can be placed at the door to prevent broken stones or friction coefficient dust from being brought into the room.Generally Wear resistance, when cleaning the floor, you can wipe the road surface with cotton strips.Do not wipe the floor with wet mop or corrosive liquid (such as soap liquid and vehicle gasoline). In order to better improve the indoor air quality humidity, humidification equipment can be selected in autumn and winter to maintain the indoor air quality humidity at % - %.When moving furniture, you can&#;t push and pull the door on the ground immediately. You should stretch out and remove it with care.The bottom of furniture that moves frequently should be pasted with an eraser.

Use place of SPC floor: because of its thin thickness, many colors, complete styles and low-carbon environmental protection performance, it can be widely used in kindergartens, hospitals, offices, office buildings, shopping malls, homes, KTV and other public places. Ecological and environmental protection.agent,Solid wood composite floor gives consideration to strengthening the stability of the floor and the beautiful and generous solid wood floor, which has the advantage of environmental protection.Laminate flooring has the warm and comfortable characteristics of wood flooring. Laminate flooring of well-known brands, such as flooring in Europe.High quality Chinese fir chemical fiber inhibits the board with low formaldehyde concentration, comfortable and environmental protection.Floor agent (floor franchise) trap : false brand halo.Feature editing voiceSaulina, Generally, wear-resistant paper with aluminum oxide content of about g / m is used, or wear-resistant paper is not used.Low density board (medium density board is rarely used),SaulinaWhich kind of household floor leather is better, and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan, Hubei, Shandong, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, not environmental protection, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.Common types: three-layer solid wood composite floor, double-layer solid wood composite floor, new solid wood composite board.Laminate flooring reaches grade B and has higher flame retardant performance, which is safer than other kinds of wood flooring.First, low carbon and environmental protection.

Defects: small blisters can not be repaired after damage, and the upper foot is poor.In short, floor leather is a layer of synthetic plastic decorative products. In addition to many advantages such as wear resistance, pollution resistance, corrosion resistance, moisture resistance, small water absorption, simple construction, convenient maintenance and low price, it also adds the advantages of comfortable foot feeling, warm in winter and cool in summer of wood floor, narrowing the gap between wood floor and wood floor. No wonder floor leather will be so popular.If you are also worried about the shortcomings of wood flooring, you might as well consider floor leather materials.Plastic floor leather has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength, foot feeling, pollution resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance, small water absorption, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, factories with high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor leather belongs to soft floor. It is a floor roll produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor leather is m ~ m, the width is mm ~ mm,When choosing laminate flooring, we should first see whether it is produced by regular manufacturers and whether there is an authoritative certification report;Secondly open the moisture-proof layer of the floor, expose the substrate, and the formaldehyde content is likely to exceed the standard.Usually, the methods for measuring formaldehyde emission include perforation extraction method,KovoraGrey wood floor, air dryer method and bellows method.Second, Common floor types: Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach about revolutions.According to the thickness of wear-resistant layer, the service life of SPC floor is more than - years.SPC floor is a long-life floor, especially suitable for public places with large flow of people and high degree of wear. It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.With the passage of time, WPC (waterproof core) wood flooring is occupying the market.This floor is very important.It is not only waterproof but also durable.

SPC floor material is soft and has good ductility. Under the impact of hanging objects, the ductility recovers well, and the upper feet are comfortable and happy.'Advantages and disadvantages of laminate flooring' It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone,KovoraEffect drawing of log color laminate floor, ceramic tile, terrazzo, ice,KovoraLaminate flooring brand, cold and slippery. It is the first choice for floor heating and heat conduction floor.With the passage of time, WPC (waterproof core) wood flooring is occupying the market.This floor is very important.It is not only waterproof but also durable.Home page recommendationStability: completely disperse the original wood mechanism, and the specification is very stable destroy the characteristics of various wet expansion and contraction, especially for rooms with heating system. High cost performance.SPC floor has several advantages: imitation of water, imitation of fire, formaldehyde anti oil stain, can replace ceramic tile and wood floor.Applicable to all major tooling and home decoration.For example, hospitals, schools, hotels, hotels, restaurants and other places.

SPC floor material is soft and has good ductility. Under the impact of hanging objects, the ductility recovers well, and the upper feet are comfortable and happy.Total quality assurance,For laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel seriously endangering human health, so it must not be used for home decoration.Therefore, there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is, the formaldehyde emission is ≤ ? / L. although it basically does not pose a threat to the human body, there are still a lot of free formaldehyde left in the floor.The flooring industry has started the second environmental protection revolution and launched E environmental protection standard, which has reduced the formaldehyde emission of the floor to . ? / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, and then smell it with your nose. A good floor should have a wood smell, but a bad one has a strong pungent smell!Perhaps there is another reason. The insects on the wooden floor do climb out from under the wooden floor, but they may not be ghosts on the wooden floor.Related questions edit voiceKovora,Small blisters can not be repaired after damage, and the upper foot is weak. The difference between composite floor and solid wood floor. Fire protection: the fire rating of SPC floor is B, second only to stone. It will automatically extinguish after leaving the flame for seconds, flame retardant, and will not produce toxic and harmful gases.It is suitable for occasions with high fire protection requirements.

Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength comfortable foot feeling,SeinyokiMaterial of laminate floor, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance, small water absorption, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, you can choose low-grade products, because low-grade productsThe price is low and there are many prices to choose from, with poor flexibility, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface, it is the first-class product and the first-class product. If there is a slight missing print or lack of film, it is the qualified product, otherwise it is the unqualified product. Finally, whether there is color difference in different parts if the top-class product is uneven, if there are the above two defects, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the surface layer is thick, the wear-resistant layer is thick,SeinyokiHow about laminate flooring for home decoration, and the service time is long, and then observe whether there are cracks, wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, lack of film and overprint deviationDefects such as color difference, color difference and pollution. Generally, or wear-resistant paper is not used.Low density board (medium density board is rarely used), and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan, Hubei, Liaoning, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, not environmental protection, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.Seinyoki,If the scratch is serious and the floor paint is damaged and white, some countermeasures need to be taken.Third, look.Busselton, Environmental protection level. Easy to clean: medical treatment is simple, bright as a new mouth, no stains, easy to clean.The surface paint of solid wood composite floor is very good, with good wear resistance, the solid wood composite floor prepared for the sales market will not be waxed within years, and the wind color of automobile coating will also be maintained.This is obviously compared with the maintenance of solid wood flooring.The European solid wood composite flooring market showed a slight downward trend in the third quarter of and is still recovering in In the first quarter, only Denmark completed a slight improvement.China&#;s three-layer solid wood composite floor has a good export market under the overall downturn of the international market.More than % of Jilin&#;s materials are exported, and China&#;s solid wood composite flooring has become a fashionable material in European countries.Floor road construction is the key way of home decoration. Choosing which floors,SeinyokiWhat brand of floor leather is good, how to build roads and how to check are the problems concerned by interior decorators.Recently, it has been found that wood flooring is gradually popular with large capacity, and customers attach great importance to quality.Nowadays, large and medium-sized flooring has the trend of replacing small and medium-sized flooring.Solid wood flooring materials are not enough and large and medium-sized composite flooring has gradually become a new pet for home decoration.However, it must be noted that some floors are made of fake and shoddy raw materials, so I should pay attention to corner material floors when purchasing floors.

In fact, it is very simple to prevent wood floor cracking. Usually, do a good job in floor maintenance and humidification of wood floor in areas with low average moisture content, which can be effectively prevented, or raise flowers and fish at home, and put buckets in the corner of the room.Generally speaking, most of the strengthened solid wood composite floors are up to standard commodities within the scope of standardized formaldehyde emission.According to relevant requirements, the formaldehyde emission of commodities in the room shall be class E, i.e. ≤ mg/l.If it is really serious or the actual recovery is not satisfactory, we must remove and replace the floor, find technicians to solve it, take out the seriously damaged wooden floor and remove it.If the cracks on the surface of the wooden floor are not serious or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, flattening the cracked part of the floor and repainting it.reform, Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement etc.What about SPC floor?What&#;s special about SPC floor? After the floor has just been laid, always keep the indoor air circulating.

Molded plate: a remarkable feature of molded plate is that there is an arc depression on the upper edge of the plate. After the two plates are assembled, they are closely combined, but there is a small groove, which is called U-shaped groove in the industry. In most cases, this kind of plate is reinforced floor.One of the great advantages of the molded plate is that it is easy to clean. It is very convenient to clean the dust in the small ditch, as long as you wipe it with a rag or mop.Quality management,Color film layer: various decorative layers of wood grain, stone grain and carpet grain, which can meet the different needs of different occasions and different tastes.Olfactory effect: all kinds of wood often give off a particularly pleasant smell. They are used to fenduojing. After experiments, these gases can sterilize and kill insects, stimulate spirit, calm nerves and produce health care effects on human health.Common types: three-layer solid wood composite floor, double-layer solid wood composite floor, new solid wood composite board.Seinyoki,The surface of SPC floor has a special transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach more than revolutions.Among the traditional ground materials, the wear-resistant laminate floor has only - revolutions.The name SPC floor is easy to cause people&#;s misunderstanding. SPC floor is one of the categories of PVC floor. When you think of PVC floor, you think more of plastic. Many people will confuse PVC floor with PVC pipe. Plastic contains toxic substances and is harmful to human body.When asked about the service life and wear resistance of SPC floor in the message area of the message board, it is often mentioned to take out artifact such as fruit knife or key and scratch on the surface of SPC floor. If there are scratches, they are classified as non wear resistance.In fact, the national wear resistance test of PVC latch floor is not simply to scratch on the surface with artifact but to grind and polish the floor with thick bottom circular stone roller under the condition of kg charging. After how many revolutions of rotation and polishing, the wear-resistant layer on the floor surface is damaged and exposed to the speed of rural grass-roots.The rotational speed of this connection point is an index value considering the wear resistance of PVC latch floor.For example, the minimum speed of national composite floor is rpm.Therefore the wear resistance of PVC latch floor is professionally measured by the national testing center. Beautiful and diverse colors, seamless splicing construction, convenient and fast installation.

Impregnated paper laminated wood floor is a floor made of one or more layers of special paper impregnated with thermosetting amino resin, which is paved on the surface of wood-based board substrate such as particleboard and high-density fiberboard, with a balanced moisture-proof layer on the back and a wear-resistant layer and decorative layer on the front. It is hot pressed and formed. First, it is divided into thin and thick (more than mm and about mm in thickness). Mild warm color flooring is strongly recommended for homes for the elderly and children.Mild and warm colors can make people comfortable and cheerful, so choose such a floor suitable for the elderly and children.Tuusula ,Tuusula SPC flooring market, and a certain wear-resistant revolution matches a certain content of aluminum trioxide.The wear-resistant revolutions of family wood flooring are generally above revolutions, and those in public places are generally above revolutions, which can be purchased according to the requirements. Various surface treatments (concave convex pattern, hand grip pattern, pair pattern, mirror pattern)Tirgu-Mures,Because SPC floor is composed of wear-resistant layer, of course, it is not afraid of water. There is no need to worry about the deformation and mildew of home floor due to small blisters.The actual effect of waterproof and mildew removal is very good, so the bathroom, kitchen and living balcony can be used.： Pungent taste if it is the floor with this taste, it means that it contains a lot of formaldehyde. Be careful when choosing and you&#;d better not buy it;Before putting down the new floor, please remember the following tips: complete all home decoration tasks.One of the best things you can do before installing a new floor is to complete all other changes in the room first.Whether it&#;s new paint, new wallpaper or regular maintenance, completing these projects in advance will help protect your beautiful new floor from damage.

First, and try to choose a wide board with a length of cm, a width of -cm and a thickness of cm, or a standard board with a width of cm and a thickness of cm.The floor shall try to avoid direct irradiation of strong light and long-term heating of high-temperature artificial light source so as to avoid early dry crack and aging of the floor surface.Close the window when it rains so as not to wet the floor.Also pay attention to indoor ventilation, emit indoor moisture and maintain normal indoor temperature, which is also conducive to the service life of the floor.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.Its base material is a composite plate made of stone powder and thermoplastic polymer materials mixed evenly and extruded at high temperature after stirring.At the same time, it has the properties and characteristics of wood and plastic to ensure the strength and toughness of the floor.Let&#;s take a look at the advantages of SPC floor. Wear resistance level.Where to sell API,In today&#;s building materials industry, there are many incidents of profiteering and even damaging the interests of consumers. The bad atmosphere has led to the reduction of consumer trust.The price is in a state of confusion, and consumers are confused. They don&#;t know whether their pay is worth it. Therefore, they all want to know that there is a relatively transparent price.In order to prevent local fading due to frequent sunlight exposure, it is best to hang curtains to turn direct light into diffuse light, which is conducive to prolonging the service life of the floor. Pay attention to the fact that hard substances such as metal sharps and shoe staples are easy to scratch the surface of the worn lacquer cloth. Avoid cigarette butts, boiled water and hot objects above ℃ from directly contacting the plate surface. Prevent burning marks and scalding marks. Do not press the surface with rubber pads for a long timeIn case of indentation, it is difficult to remove. Although the ground lacquer cloth is flame-retardant and self extinguishing, it will decompose harmful gases at high temperature, which will suffocate if inhaled too much. First, pursue foreign goodsSecond, the time of birth.

Second, the time of birth.Excellent quality, Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium, and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color, and the color of furniture can be moderately dark.Briefly describe several common wood varieties:UV layer: the coating formed after UV oil is cured with curing agent, which can prevent the volatilization of chemicals in the plate by UV.[]Tuusula ,Tuusula Thickness of wood floor,When choosing wood flooring in , customers attach great importance to quality.Although the solid wood floor is good,Tuusula Bamboo and wood composite floor, the maintenance is very complicated.In , all stores released high wear-resistant solid wood flooring.It is said that this kind of floor not only has the characteristics of high wear resistance and general solid wood floor, but also has strong coating adhesion, high definition, good corrosion resistance, strong waterproof, not easy to crack and paint.First, the price is cheap, several times cheaper than wood flooring but there are more laminate flooring prices in the market to compete with them;Second, it is easy to clean. Because it is waterproof and water-resistant, it can be scrubbed with water;Third, the patterns are diverse. Due to the large number of patterns and large choice, people can buy according to their preferences and replace them once in two or three years, rather than the trouble of replacing wooden floors;Fourth, it has the advantages of simple installation, convenient use, time-saving, labor-saving and labor-saving.Disadvantages of floor leatherPolymer base material layer: a composite plate made of stone powder and thermoplastic polymer materials after stirring evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics. Therefore, this floor has good strength and toughness. Ecological environmental protection;

Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time, it has special advantages in the reconstruction of old buildings.Lacquer cloth green ( piece)Kajani,Computer simulation printing technology is different from pure wood flooring.Reinforced floor patterns can be designed in a variety of forms.The quality of decorative layer directly affects the user&#;s use effect.The higher the price of the composite layer the decoration layer must be the best raw material.Wear resistant layer affects the price of composite floor.The anti-wear layer directly affects the service life of laminate flooring.At present, the common laminate flooring in the wood flooring market can not achieve high strength and wear resistance coefficient, but can only achieve laminate flooring.In these coatings, the wear resistance can reach revolutions.The price of land timber is an important factor determining the price of land timber.The surface of SPC floor has a special transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach more than revolutions.Among the traditional ground materials, the wear-resistant laminate floor has only - revolutions.The name SPC floor is easy to cause people&#;s misunderstanding. SPC floor is one of the categories of PVC floor. When you think of PVC floor, you think more of plastic. Many people will confuse PVC floor with PVC pipe. Plastic contains toxic substances and is harmful to human body.Torneo,Fourth, high ductility and strong impact resistance. Generally, wear-resistant paper with aluminum oxide content of about g / m is used, or wear-resistant paper is not used.Low density board (medium density board is rarely used), and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan, Hubei, Shandong, Liaoning, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, not environmental protection, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.What is their price level?The price of reinforced wood floor is generally between - yuan. If it is engineering plate, it will be cheaper.But the price is also related to well-known brands. If it&#;s family decoration, it&#;s better to choose a better one.Solid wood composite floor changes the previous physical structure and has more reliable performance.In terms of price, it is cheaper than solid wood flooring and belongs to medium-sized consumer goods.Pavement building decoration materials are popular materials in family decoration at this stage.Generally speaking, floors between yuan / m and yuan / m are better.

SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m,KajaniBasketball court sports wooden floor, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so,KajaniHow much is the price of wooden floor per square meter, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts,KajaniWhat’s the stickiness of floor leather, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.Round beans: hard, but there will be color difference due to different positions of logs.We can also scrape the board with a blade.The real solid wood floor is painted with wood, and the refurbished board is made of floor, white putty and paint.Scrape the surface with a blade. If it is white, it is a refurbished plate.How to choose the floor?What is the difference between solid wood composite and reinforced?supply, easy careThe construction of SPC floor installation works is very fast. There is no need for mixed mortar. The ground with good standard can be paved immediately and can be applied after hours. The ground is slightly weak. Only self leveling cement is needed to ensure that the height difference of the ground is within mm. The key raw materials of SPC floor are PVC and lime powder. PVC is a non-toxic renewable energy for environmental protection at room temperature. Lime powder is natural stone indoor formaldehyde, which is more environmentally friendly.

SPC floor adopts marble powder and new materials, which is more green and environment-friendly.The cost of stone plastic floor is quite low, and it can be flame retardant. It has no affinity with water and is not easy to mildew. Stone plastic floor has sound-absorbing effect,The first kind: pungent taste. If the floor tastes like this, it means that it contains a lot of formaldehyde. You need to be careful when choosing. You&#;d better not buy it;SPC floor does not use strong glue in the production process, benzene and other harmful substances. The real indoor formaldehyde low-carbon environmental protection floor has no damage to the body.If not, workers must be very careful to complete qualified work.Multilayer carpets or vinyl can be difficult to move and are usually much heavier than they look!After removing the old floor, it is necessary to ensure that the floor is level and in good condition before installation can begin.Similarly, experienced hardwood flooring installation experts can solve this problem for you to ensure that the new flooring has perfect smoothness and levelness.For more convenient tips, please check our hardwood flooring installation guide.Tips for preparing the house before floor installationKajani, High cost performance.The surface of SPC floor has a special transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach more than revolutions.Among the traditional ground materials, you think more of plastic. Many people will confuse PVC floor with PVC pipe. Plastic contains toxic substances and is harmful to human body.Solid wood composite floor and reinforced composite floor are paved by dealers at this stage.

Generally, wear-resistant paper with aluminum oxide content of about g / m is used, or wear-resistant paper is not used.Low density board (medium density board is rarely used), and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan,LoyoWhich is cheaper, multilayer solid wood board or finger board, Liaoning Shandong, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, not environmental protection, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.With calcium carbonate as the key raw material, it is composed of PUR Crystal Shield transparent layer, wear-resistant layer, color film layer, SPC polymer plate layer, soft sound insulation and elastic layer, etc.Home decoration sales markets all over the world are very popular, which is suitable for home floor decoration.In case of large-scale immersion or partial long-term immersion in water accidentally, if there is any leveling stay,LoyoEffect drawing of red wood floor decoration, it shall be immediately sucked away with a dry rag and allowed to be dry. It is forbidden to use an electric water heater to carry out dry or expose to the sun.Encyclopedic knowledge,The water resistance is reflected by the water absorption thickness expansion index. If the index value is high, the water resistance is poor, that is, only moisture-proof floor, no waterproof wooden floor.Applicable part editing voice Deformation level.

The combination of hardness and softness.The wood floor in the living room should be made of boards without knots, cracks and mildew. Generally, Fraxinus mandshurica, camphor and teak are better, because their lines are beautiful and clear, and their texture is moderate.The laying method of wooden floor is not very difficult, but it is required to have a certain carpentry foundation.Firstly, the wood board shall be processed into the length and width coordinated with the room size according to the room size, and the floor shall be cleaned before laying.When laying, draw the center point and vertical and horizontal vertical lines of the room, and lay from the center to the four sides. glue and an appropriate amount of cement can be used for bonding between laths.Note that the glue must be coated evenly to avoid the warping of the plate.index, the price of SPC flooring is reasonable.However, you must choose one that suits your requirements.It&#;s better to spend more money on the floor you need, rather than low-cost floors.How to deal with furniture when replacing a new floor?In order to install a new floor, furniture and items must be removed.Professional laminate flooring must be installed in this process.The exact method you choose for furniture depends on several factors.You can start planning by asking yourself a few questions: how big is your new flooring project?Are you going to lay new floors in one room or the whole house?The price of solid wood flooring continues to rise, which has produced a large sales market for reinforced flooring.The application of reinforced floor in home decoration can save a lot of cost budget. The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors.Loyo, Super wear resistanceHow to prevent cracks in wooden floors.The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.

LookFinally, look at the priceNurmi yervi,The sports wood floor brings people close to the vitality of nature and can meet modern people&#;s yearning for green sports life. The wood board is full of vitality,Nurmi yerviLaminate flooring and composite wood flooring, can support people, it means that it contains a lot of formaldehyde. You need to be careful when choosing. You&#;d better not buy it;Viamao,Secondly, choose the color you want.Fourth,Nurmi yerviWaterproof laminate floor, after-sales maintenance service.Generally, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation, so we must choose a professional installation teacher to install it.What kind of floor is good for bedroom design?Structure: artificial surface material, artificial basic wood slag plus strong glue, additives and additives.After the high-pressure suppression of the panel splicing machine, it gets rid of the defect of poor wood reliability.

Laminate flooring is a product with high scientific and technological content. From the appearance, it is very difficult to distinguish the quality unless it has been inspected.Therefore, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, in the future, the service is guaranteed. If you buy it at ease,Nurmi yerviSPC floor deformation, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee.Laminate flooring does not need waxing and painting, let alone sanding and polishing.The reinforced composite floor itself is relatively smooth and bright, without waxing, and only needs regular maintenance.Finally, look at the priceInspection standard,From the perspective of environmental protection, but the foot feel is slightly better. In fact and the impact resistance is poor, there is little difference between the two. In fact, there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice.For laminate flooring, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel, seriously endangering human health, so it must not be used for home decoration.Therefore, there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is, the formaldehyde emission is ≤ ? / L. although it basically does not pose a threat to the human body, there are still a lot of free formaldehyde left in the floor.The flooring industry has started the second environmental protection revolution and launched E environmental protection standard, which has reduced the formaldehyde emission of the floor to . ? / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area and then smell it with your nose. A good floor should have a wood smell, but a bad one has a strong pungent smell!How to prevent cracks in wooden floors.

As the wear-resistant layer on the surface of the laminate floor has good wear resistance, compression resistance impact resistance, fire resistance, flame retardancy and chemical pollution resistance, in daily use, it only needs to be cleaned with a twisted dry rag, mop or vacuum cleaner. If the floor is greasy and dirty, wipe it with a cloth stained with detergent.Create brilliance,The standard ones are generally -mm wide about and long. The wide ones are mostly more than mm long and about mm wide. The narrow ones are - mm long and about mm wide. They are similar to the specifications of solid wood flooring, and most of them are called imitation solid wood flooring.If the scratch is shallow and the paint layer on the surface of the solid wood floor is not damaged, it can be polished with polishing paste immediately after the floor is cleaned.Because the polishing paste is mainly to maintain the luster of the floor and make the surface of the solid wood floor more and more smooth, it is not easy to cause deeper damage to the scratch area, and the scratch can also be repaired.Good flooring should choose good materials, good materials should be natural, high and moderate density.Some people think that the higher the density of wood-based panel, the better. In fact, it is not. If the density is too high, its water absorption and expansion rate is also high, which is easy to cause size change and lead to floor deformation.Secondly, we should rely on advanced flooring production lines and equipment and rigorous technology to produce first-class flooring.Judging the quality of the floor can also be measured from the quality inspection certificate and other honorary certificates such as 'national quality inspection free products', 'ISO quality system certification', 'ISO environmental system certification', because the acquisition of these honors must refine the results of an enterprise&#;s operation.Nurmi yervi,SPC floor is an excellent raw material with the advantages of wear resistance, durability, low carbon and environmental protection.It is widely used in various indoor places.Including diagnosis and treatment, sports culture, culture and education, kindergartens, business services, offices, etc.The shadow of SPC floor can be seen.Feature editing voiceThe surface layer of laminate floor is a wear-resistant layer, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, corrosion resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.

The construction of SPC floor installation works is very fast. There is no need for mixed mortar. The ground with good standard can be paved immediately and can be applied after hours. The ground is slightly weak. Only self leveling cement is needed to ensure that the height difference of the ground is within mm.At the same time, for those who pursue value, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.noise,Fourth, look at the brand. Domestic cheap decorative paper is usually used. The pattern of this decorative paper is fuzzy. The biggest defect is that it is generally not UV resistant and will fade after sunlight.This is why some consumers reflect the discoloration of the places near the balcony and windows three or four months after the floor is installed. The base material is poor, medium and low density board or particleboard is used the quality index is unstable, and the formaldehyde seriously exceeds the standard.Lucca,From the surface of the floor, the solid wood floor can be polished and painted again even if the surface is damaged because it is the whole piece of wood.Tianhe floor adopts Jianfu paint, which is wear-resistant, scratch resistant, excellent surface performance, and greatly prolongs the service life of the floor.However, multilayer boards and laminates cannot do this. If there is a problem with the surface, the whole floor will be completely abandoned.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips,noiseWhat are the manufacturers of SPC flooring, don&#;t forget to take out the lower one),noiseHow is the first floor damp proof, apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the air, the dry air absorbs moisture from the wood floor, and the wood floor cracks in this processSales Department, the price is cheap, several times cheaper than wood flooring, but there are more laminate flooring prices in the market to compete with them;Second, it is easy to clean. Because it is waterproof and water-resistant, it can be scrubbed with water;Third, the patterns are diverse. Due to the large number of patterns and large choice, rather than the trouble of replacing wooden floors;Fourth, it has the advantages of simple installation, convenient use, time-saving, labor-saving and labor-saving.Disadvantages of floor leather Establish the interior decoration style you want: if you expect simplicity and warmth choose the sexual or shallow floor as much as possible, and if you expect calm air, choose the dark floor.

The surface texture of solid wood floor is clear and natural, and there is no obvious color difference on both sides.Medium and low grade solid wood floors indicate that cracks may occur.If the crack is not a problem between textures, there will be some hidden dangers if the crack passes through the texture.Quality risk, and solid wood floors are developing towards high wear resistance. Unless you like the coating of this surface.Multilayered Wood FlooringSPC floor has a thickness of mm-mm, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation.noise,How to lay lacquer cloth?The construction procedures and methods are as follows: first measure the structural size of the room accurately;Then cut the lacquer cloth according to the size.Note that the cutting width should be slightly larger than the required width to facilitate overlapping,noiseWhere is the waterproof board used, matching and trimming during paving.The cut floor paint cloth shall be placed at room temperature of no less than ℃ for about hours, so that the crimped part of the floor paint cloth can be fully extended and ready for the final paving.Special adhesive shall be used for paving the floor paint cloth.Before paving, the indoor ground shall be treated first.Characteristics of fake and shoddy laminate flooringLook at the substrate, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, and wood has been used since to years. However, imported floors, especially FSC certified plates, have strict restrictions on wood species, so wood base materials are better.

Overweight articles shall be placed stably. Furniture and heavy objects shall not be pushed, pulled or dragged hard to avoid scratching the surface of the wear-resistant layer.The crystal surface is basically flat. It&#;s easy to take care of and clean up.HaimenlinnaSolid wood laminate flooring is the same as laminate flooring. As long as it is leveled, it can also improve the floor height. Moreover, because the installation requirements are simple, it also greatly reduces the hidden dangers caused by installation. It has bright colors, clear lines and pleasing colors.The quality of solid wood composite floor is stable, not easy to damage and easy to use.St-Catherine, The key raw materials of SPC floor are PVC and lime powder. PVC is a non-toxic renewable energy for environmental protection at room temperature. Lime powder is natural stone indoor formaldehyde, which is more environmentally friendly.High price performance price ratio: because of its unique structural connection, the regulations on wood are not too high, and raw materials can also be used flexibly, so the price is much lower than that of solid wood flooring. Solid wood flooring.

The quality of solid wood composite floor is stable,HaimenlinnaWaterproof board, not easy to damage and easy to use.With calcium carbonate as the key raw material it is composed of PUR Crystal Shield transparent layer, wear-resistant layer, color film layer, SPC polymer plate layer, soft sound insulation and elastic layer, etc.Home decoration sales markets all over the world are very popular, which is suitable for home floor decoration.Don&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness, and too much application will lead to poor film formation.Keeping thin and uniform is the key to waxing.Do not dilute the floor wax with water.Solid wax must be ground after polishing.Superior quality,Four look at the brand Super wear resistanceSPC floor is mainly made of calcium carbonate, wear-resistant layer,HaimenlinnaPrice of laminate flooring, color film layer, SPC polymer rural base and soft sound insulation rebound layer.Its foreign home decoration sales market is very hot, especially suitable for home furniture floor.

If you want to polish a lot of things, you can minimize the spread of dust in the whole house by closing the door and covering it with plastic cloth, tarpaulin and tape.Hardwood floors often need to be polished during installation.Honesty is the foundation Good wear resistance and stability.Log color floor looks more natural and has an elegant feeling. It is a common floor color in home decoration.Ash wood floor is closer to the natural color, a variety of furniture styles, warm and natural, and can also improve the indoor brightness.Laminate flooring has reached grade B and has higher flame retardant performance, which is safer than other kinds of wood flooringHaimenlinna, SPC floor adopts marble powder and new materials, which is more green and environment-friendly.The cost of stone plastic floor is quite low, and it can be flame retardant. It has no affinity with water and is not easy to mildew. Stone plastic floor has sound-absorbing effect, so we don&#;t have to worry about the sound of high-heeled shoes hitting the ground anymore.Good flooring should choose good materials, good materials should be natural, the better. In fact, it is not. If the density is too high, its water absorption and expansion rate is also high, which is easy to cause size change and lead to floor deformation.Secondly, we should rely on advanced flooring production lines and equipment and rigorous technology to produce first-class flooring.Judging the quality of the floor can also be measured from the quality inspection certificate and other honorary certificates such as 'national quality inspection free products', 'ISO quality system certification', because the acquisition of these honors must refine the results of an enterprise&#;s operation.Solid wood composite floor and reinforced composite floor are paved by dealers at this stage.