Before putting down the new floor, please remember the following tips: complete all home decoration tasks.One of the best things you can do before installing a new floor is to complete all other changes in the room first.Whether it&#;s new paint, completing these projects in advance will help protect your beautiful new floor from damage.The third kind: you can smell the faint smell of wood. This floor shows that there is little glue content.It can reach European standard E levelRAMADA,The floor shall try to avoid direct irradiation of strong light and long-term heating of high-temperature artificial light source, emit indoor moisture and maintain normal indoor temperature, which is also conducive to the service life of the floor.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.Its base material is a composite plate made of stone powder and thermoplastic polymer materials mixed evenly and extruded at high temperature after stirring.At the same time, it has the properties and characteristics of wood and plastic to ensure the strength and toughness of the floor.Let&#;s take a look at the advantages of SPC floor.durabilityColon,The wooden floor packaging produced by reliable manufacturers should have the manufacturer&#;s name, detailed address, operation manual and national standards marked in Chinese.Since , the national standard for lifting wood flooring has been gradually implemented, and its name and serial number are the national standard: GB / t- prepreg paper laminated wood flooring.UV layer: the coating formed after UV oil is cured with curing agent, which can prevent the volatilization of chemicals in the plate by UV.[]Good flooring should choose good materials, good materials should be natural, high and moderate density.Some people think that the higher the density of wood-based panel, the better. In fact, it is not. If the density is too high, its water absorption and expansion rate is also high, which is easy to cause size change and lead to floor deformation.Secondly, we should rely on advanced flooring production lines and equipment and rigorous technology to produce first-class flooring.Judging the quality of the floor can also be measured from the quality inspection certificate and other honorary certificates such as 'national quality inspection free products', 'ISO quality system certification', 'ISO environmental system certification', because the acquisition of these honors must refine the results of an enterprise&#;s operation.

You can take some steps to ensure a smooth and seamless installation: remove the base plate and door frame before starting.This will make it easier for your installation team to get the perfect fit.No matter what kind of floor you are currently using, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.Rubber: rubber with poor toughness and stability. Consider environmental protection factors.Welcome to inquireHigh concentration formaldehyde is a genotoxic chemical.In animal experiments, high concentration inhalation in the laboratory can cause nasopharyngeal tumors.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat,RAMADAEffect drawing of wooden floor background wall living room, clean and dry, it can be glued and paved.Gluing is the last process before paving, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance,RAMADAWood floor or floor tile, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.Many people think WPC floors are thick and therefore durable.OK, it&#;s a durable floor, but no more than SPC floor.Compared with WPC flooring, SPC flooring has good density.The higher density makes them resistant to damage and heavy weight.They will not be affected by the falling or moving of heavy objects.Therefore, SPC is considered to have good durability.

The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat clean and dry, and the tool shall be a toothed rubber scraper.During gluing it can be glued and paved.Gluing is the last process before paving glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap,RAMADAImitation wood floor, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.Latest consultation,The surface of SPC floor has a special transparent wear-resistant layer processed by high technology and its wear-resistant revolution can reach more than revolutions.Among the traditional ground materials, the wear-resistant laminate floor has only - revolutions.The name SPC floor is easy to cause people&#;s misunderstanding. SPC floor is one of the categories of PVC floor. When you think of PVC floor, you think more of plastic. Many people will confuse PVC floor with PVC pipe. Plastic contains toxic substances and is harmful to human body. Brush the finish paint three to four times according to the above procedure, and the last time does not need polishing.The density of laminate floor substrate (high density fiberboard) shall be .-. g / cm, and it is not appropriate to have too low or too high density.RAMADA,Third, the processing technology is highly regulated;Its structure is complicated, and its essential quality is not easy to distinguish;The standard ones are generally -mm wide, about and long. The wide ones are mostly more than mm long and about mm wide. The narrow ones are - mm long and about mm wide. They are similar to the specifications of solid wood flooring, and most of them are called imitation solid wood flooring.The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.

SPC floor has a thickness of mm-mm,KovilianWood floor maintenance, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation. Good wear resistance and stability.Kovilian,First, the price is cost-effective. High cost performance.Chennai, Good wear resistance and stability. Keep the floor dry and clean. If there is dirt on the floor surface, generally wipe it dry with a damp mop without dripping water.Whether it is solid wood composite floor or solid wood floor, its surface needs to be maintained and does not want to strengthen the surface of the floor.When cleaning the solid wood floor, remember not to wipe the solid wood floor directly with wetland.Please choose a special detergent for wood floor cleaning to keep the wood floor in its natural primary color and prevent the wood floor from cracking.

The most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the dry air absorbs moisture from the wood floor, high-grade, calm, classical and unique furniture charm.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Install basketball wood flooring manufacturer&#;s flooring?Sports wood flooring installation basketball wood flooring manufacturers now have many unprofessional basketball wood flooring manufacturers.In order to reduce costs, reduce costs, and cause the floor to slip. Main performance.supply,SPC floor has several advantages: imitation of water, imitation of fire, formaldehyde anti oil stain, can replace ceramic tile and wood floor.Applicable to all major tooling and home decoration.For example, hospitals, schools, hotels, hotels, restaurants and other places. In terms of foot feeling, solid wood is better than reinforcement. According to national industry standards, all solid wood is mm thick and wood keel ceiling is selected for installation,KovilianWhat is the size of the wooden floor, so the upper foot is better than mm thick reinforcement plate.How to distinguish true and false solid wood flooring?The standard ones are generally -mm wide about and long. The wide ones are mostly more than mm long and about mm wide. The narrow ones are - mm long and about mm wide. They are similar to the specifications of solid wood flooring, and most of them are called imitation solid wood flooring.

High price performance price ratio: because of its unique structural connection, the regulations on wood are not too high, and raw materials can also be used flexibly, so the price is much lower than that of solid wood flooring.target, Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time, it has special advantages in the reconstruction of old buildings. Remove the residual glue and glue on the ground.At the same time, for those who pursue value, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.Kovilian, SPC floors are subject to biological resistance treatment, and the unique sealing of the surface layer makes the products have the characteristics of anti bacteria and antibacterial, and meet the cleaning requirements of various departments and institutions.When it comes to the choice of decoration flooring, you can think of ceramic tile, marble and wood flooring. However, SPC flooring has become the first choice for people to buy Flooring in developed countries and regions such as Europe, America, Japan and South Korea, and the domestic market is gradually accepting SPC flooring. Why SPC flooring is popular? First of all, what is SPC flooring and how about SPC flooring,Now let&#;s learn what SPC floor is and how SPC floor is.SPC is the abbreviation of stone plastic composites (stone plastic composites). The main raw material is polyvinyl chloride resin. It is made by extruding SPC substrate by extruder combined with T-shaped die, and heating, laminating and embossing PVC wear-resistant layer, PVC color film and SPC substrate by three roll or four roll calender at one time. Glue is not used in the production process. Ultra light and ultra-thin Exposure to obvious sunlight, or significant increase or decrease in room temperature, will cause early embrittlement of solid wood board floor paint

It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, terrazzo ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring:After - floors are assembled on the flat ground, whether the tenon and groove bite is appropriate, not too loose or too tight by hand and eye observation.At the same time, carefully check the assembly height difference and gap between floors.Sakavin,In dry weather, if it is dry season in autumn and winter, pay attention to increase the ground humidity. Wet mop can be used to mop the ground to prevent ground cracking.In addition to the second article the other five articles determine the trend of floor price. Therefore, consumers must remember these five articles before buying their favorite products, and then go shopping to avoid buying losses.The wooden floor is warm in color, and it&#;s comfortable to shop at home without shoes, but most bosses love it and hate it. If you get wet,SakavinHow about composite floor, it&#;s easy to be damaged. It takes time to maintain health every time, Green environmental protection Super wear resistance Water resistance

We hope these techniques will help simplify the plan for installing new floors.If you plan to renovate your house and add new floor elements, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.European and American countries call this kind of floor RVP (rigid vinyl plate), rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, with a thickness of about .mm, transparent texture, strong adhesion, wear resistance and scratch resistance, and the wear-resistant coefficient can reach - revolutions.[]The reinforced composite floor structure is divided into wear-resistant layer, decorative design layer, high-density board layer and balance (waterproof) layer. A large amount of mixed glue is added to the lining.If the glue used by the manufacturer fails to pass the test, there will be formaldehyde. The reinforced composite floor is wrapped with high-rise plastic film to ensure that formaldehyde remains inside.However, when the temperature is constantly changing and applied, formaldehyde will leak into the air. Keep the floor dry and clean. If there is dirt on the floor surface, generally wipe it dry with a damp mop without dripping water.High value, SPC floor has special anti-skid property. The more it meets water, the more astringent it is. Even if you wear running shoes with nails, you won&#;t leave scratches on the floor. A foot pad shall be placed in front of the door to reduce the wear of sand on the floor.Well known brands: LG and Hanhua flooring in Korea, Armstrong flooring in the United States, Jiefu and Tejia flooring in France, fulbo flooring in Sweden, longxilu, tahilong, Dongli flooring in Japan,SakavinSolid wood flooring, and domestic bonier flooring.For the pursuit of cost performance, choose Korean brands, Japanese brands for the pursuit of quality, European and American brands for the pursuit of brand effect, and domestic brands for low prices.

When asked about the service life and wear resistance of SPC floor in the message area of the message board, it is often mentioned to take out artifact such as fruit knife or key and scratch on the surface of SPC floor. If there are scratches, they are classified as non wear resistance.In fact, the national wear resistance test of PVC latch floor is not simply to scratch on the surface with artifact,SakavinWhat is the material of waterproof floor, but to grind and polish the floor with thick bottom circular stone roller under the condition of kg charging. After how many revolutions of rotation and polishing, the minimum speed of national composite floor is rpm.Therefore, the wear resistance of PVC latch floor is professionally measured by the national testing center.query,The current woodworking is basically done by woodworkers. The 'general woodworking' method is adopted, and the shrinkage joint size is not calculated according to the thermal expansion and cold contraction parameters provided by SPC flooring factory.If the room is slightly larger, but the reserved gap is too small, especially when the temperature difference between winter and summer is too large, it is very easy to have no gap to expand, resulting in arching and warping.Manufacturers generally consist of four layers of raw materials, namely wear-resistant layer, decorative layer, which cuts off some of the upper edge of the floor, and then applies paint to cover the color of the substrate, so that the edge color has a sense of hierarchy, which is similar to the solid wood floor, so it is deeply loved by the majority of consumers.After the chamfered and painted board is paved, there is a very shallow small seam on the upper edge between the board and the board, which is easy to accumulate dust and inconvenient to clean.There is no such problem for boards without chamfering.Sakavin,durabilitySixth his specifications and dimensions are also related to his total price.SPC floor is constantly favored by people at home and abroad. It is an all-round new favorite integrating the advantages of ceramic tiles and other types of floor materials. It is presented and interpreted with a variety of colors, environmentally friendly materials and diversified colors, making the noise and disturbance lose the sense of existence.Let&#;s take a look at the advantages of SPC floor after class.

Non toxic and tasteless, not afraid of water, fire and tide;In terms of scratch resistance, resource use and anti-skid performance, SPC floor is better than laminate floor. Environmental protection level.Moita,... the surface layer of SPC floor has been solved by pur Crystal Shield and has good air permeability. Even if barefoot steps on it, it will not feel cold and very comfortable. In addition, the rebound technical layer has stronger ductility. Even if it is constantly bent for degrees, it is OK. There is no need to worry about falling pain. It is especially suitable for homes with old children.SPC floor will be 'astringent' when it meets water, that is, the friction will increase and the ground anti-skid characteristics are very good.Its wear resistance is also very high, that is, the use of steel wire brush to rub on the floor, there will be no scratches, and the service life can reach more than years.In addition, SPC floor is very lightweight, with a net weight of only -kg per square meter, which is % of the general floor material, which can reasonably save the height width ratio of indoor space and alleviate the load of road surface.No swelling, no deformation, not to mention the maintenance in the middle and later stage. There is a sound insulation and noise reduction layer at the bottom of SPC floor, and the actual effect of sound insulation and noise reduction is also very good.Many people will choose to decorate with wooden floor, practical and beautiful.Do you know how wood floors are classified and why?Now let&#;s introduce the three categories of wood flooring.First, pay attention to the size of the board, and try to choose a wide board with a length of cm, a width of -cm and a thickness of cm, or a standard board with a width of cm and a thickness of cm.Fusagasuga, High cost performance. Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor, without keel. As long as the ground is flat, the building height can be improved.In addition, the safety hazards caused by installation are also greatly reduced.Solid wood flooring has high environmental protection, health and comfort, and is deeply loved by many small partners.Solid wood flooring has many advantages, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor?Look at the moisture content.

Look at the moisture content.Third, it cannot be repaired.If the cracks on the surface of the wooden floor are not serious,MoitaWooden floor or ceramic tile, or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, flattening the cracked part of the floor and repainting it.Where is it,Melamine surface coating is generally used for wallboard, tabletop board,MoitaDalian plastic wood flooring, etc. it is used in places with low wear resistance requirements. In the flooring industry, this kind of surface coated floor is called 'false floor'Its wear-resistant revolution is only - revolutions. If it is used with high strength, the decorative paper on the surface will wear out after two or three months. The standard laminate floor will not have such a problem after years of normal use. There is no wear-resistant layer on this kind of floor decorative paper, the pattern is beautiful and clear, and it is relatively smooth when touched by hand, which is the place where laymen are easy to be fooled.The surface texture of solid wood floor is clear and natural, and there is no obvious color difference on both sides.Medium and low grade solid wood floors indicate that cracks may occur.If the crack is not a problem between textures, there will be some hidden dangers if the crack passes through the texture.In fact, of the inspection indexes of floor leather, such as wear resistance water resistance, are improved with the hardness of floor leather.Therefore pollution resistance and flame resistance expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements,MoitaFloor glue waterproof, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, but also on the floor of workshop.The ground of the weak point machine room.

Beautiful: it can simulate all kinds of wood grain, design and color on the computer.Product range, the previous agency said that the laminate floor is a waterproof floor, which is only the surface layer. In fact, the only taboo in the application of laminate floor is small blisters. Check whether there is sand on the ground and carry out curing treatment in time. Moisture proof, no deformation in case of water, toilet, basement, etcMoita, LookAdvantages: of course, the grain is comfortable, wear-resistant, corrosion-resistant, moisture-resistant, flame retardant, and the maintenance is better than that of solid wood.Suitable soil temperature, can also be paved in the kitchen.In order to reduce the cost, SPC latch floor with extremely poor quality and low price is adopted, which has poor stability and large thermal expansion and cold contraction.The loss is caused by the 'general paving method'.

The surface is treated with special technology, without air holes and water impermeability. It is no problem to shop in the areas where toilets and kitchens communicate with water.No, it will not be like the ordinary wooden floor. Once it bubbles, it will deform and bubble, or it will become moldy due to high humidity.Color film layer: various decorative layers of wood grain stone grain and carpet grain, which can meet the different needs of different occasions and different tastes.Leica Da palmeira,High quality flooring shall be made of high-quality materials, which shall be natural, high-density and moderate.Some people think that the higher the density of wood-based panel, the better. In fact, if the density is too high, the higher its water absorption and expansion rate is, which is easy to cause floor deformation.Second, rely on advanced floor production lines, other honorary certificates such as national quality inspection free products, because the acquisition of these honors will inevitably lead to the fine operation of the enterprise.The real wood floor is processed with a whole plate, with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture.Dewar,The fire safety performance of SPC floor and homogeneous transparent waterproof coiled material floor shall meet the national industry standard gb-b, only second to marble.The quality of solid wood composite floor is stable, not easy to damage and easy to use.In addition, there are impact resistance, anti-static, anti environmental pollution anti sunlight, anti smoke, easy installation, easy maintenance, etc.

Keep the floor dry and clean. If there is dirt on the floor surface, generally wipe it dry with a damp mop without dripping water.Keep the floor dry and clean. It is clean. Do not wash it with water to avoid long-term immersion of the floor.For oil stains, customers attach great importance to quality.Although the solid wood floor is good, the maintenance is very complicated.In , all stores released high wear-resistant solid wood flooring.It is said that this kind of floor not only has the characteristics of high wear resistance and general solid wood floor, but also has strong coating adhesion, high definition, good corrosion resistance, strong waterproof not easy to crack and paint.Online consultation,The quality of solid wood composite floor is stable, not easy to damage and easy to use.Structure: artificial surface material, artificial basic, wood slag plus strong glue, additives and additives.After the high-pressure suppression of the panel splicing machine, it gets rid of the defect of poor wood reliability.Defects: some indoor formaldehyde is restrained, the quality of the sales market is uneven, and most plates are shoddy.

However, from the perspective of installation method, laminate floor, multi-layer floor and ordinary flat buckle solid wood floor belong to disposable floor because they must be fixed with nails or glue and cannot be reused.With the unique tiger Tenon Technology of Tiange floor,Leica Da palmeiraImported laminate brand, it can realize glue free, nail free and dragon free during installation, so that the floor can be disassembled, installed and used repeatedly.For example,Leica Da palmeiraWood flooring and composite flooring, in case of water immersion and other accidents, the floor can be quickly removed and reinstalled.If you live for many years and want to move away, you can also remove the floor and reinstall it in a new home. For the floors of some precious tree species such as teak, this is very important, because the logs are more and more precious, and the floor can maintain and increase its value.Quality management,Defects: small blisters can not be repaired after damage, and the upper foot is poor.Inspection results: A foot pad shall be placed in front of the door to reduce the wear of sand on the floor.Leica Da palmeira,Before installing the solid wood floor, it must be ensured that the floor is dry, flat and free of garbage.Generally, the installation of the floor must be carried out before other decoration works are completed.If the floor is not flat, the installation will cause some floors and keel to hang, which will make a sound when people step on it.Well known brands not only have the test report produced by China&#;s quality inspection authority;The marks on the packing box of the product are complete.Registered trademark, manufacturer, business unit, quantity, address, telephone number,Leica Da palmeiraHow much is laminate flooring, etc.Here to remind you, don&#;t be greedy for cheap to buy three non laminate flooring, so as not to be deceived. Never soak the floor with water during use. If there is an accident, mop the floor with a dry mop in time.

Remove the pavement and remove dust to avoid the accumulation of crushed stones or friction coefficient floating dust on the floor surface.The shoe sole can be placed at the door to prevent broken stones or friction coefficient dust from being brought into the room.Generally, when cleaning the floor, you can wipe the road surface with cotton strips.Do not wipe the floor with wet mop or corrosive liquid (such as soap liquid and vehicle gasoline). In order to better improve the indoor air quality humidity, humidification equipment can be selected in autumn and winter to maintain the indoor air quality humidity at % - %.When moving furniture, you can&#;t push and pull the door on the ground immediately. You should stretch out and remove it with care.The bottom of furniture that moves frequently should be pasted with an eraser.Select well-known brands;Delgada Bridge,Because the whole family decoration process will use a lot of raw materials such as solid wood plates and plywood, as well as a lot of wooden furniture, it is easy to grow insects when encountering appropriate temperature and environmental humidity, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.Surin, SPC floor material is soft and has good ductility. Under the impact of hanging objects, the ductility recovers well, and the upper feet are comfortable and happy. Stimulating effect.Defects: small blisters can not be repaired after damage, and the upper foot is poor.

The surface layer of SPC floor has been solved by pur Crystal Shield, with good thermal insulation performance. It will not be cold even if barefoot steps on it. It is very comfortable. Coupled with the rebound technical layer, it has good flexibility.Even if you keep bending degrees, you don&#;t have to worry about falling pain. It is especially suitable for homes with elderly and children.SPC floor will be very astringent in case of water, that is the sliding friction will increase, and the ground anti-skid performance will be very good.It also has high wear resistance.Even if the floor is rubbed back and forth with a steel wire brush, there will be no scratches, and the service life is more than years.Moreover, SPC floor is very light, with a net weight of only -kg per square meter, which is % of the raw materials of general floor. It can reasonably save the height width ratio of indoor space and reduce the bearing capacity of the floor.The SPC floor does not swell and deform,Delgada BridgeRanking of top ten famous brands of laminate flooring, and does not need to be maintained in the middle and later stages. There is a sound insulation and noise reduction layer at the bottom, and the actual effect of sound insulation and noise reduction is also very good.There are many kinds of floors used in interior decoration. Community owners who have experience in interior decoration should know that different kinds of floors have different home decoration effects. Which kind of floor is better?Let&#;s take a look at the types of solid wood composite flooring.Wear resistant paper invented in the s was used on the surface of bowling alley.Because of the creation, invention and application of anti-static laminate flooring products, European manufacturers use wear-resistant paper to strengthen the production and manufacture of anti-static flooring, and take it as a key component to strengthen anti-static flooring.At present, the domestic rate of wear-resistant paper in China has reached about %, but it still needs to be imported.The key index values for evaluating the quality of wear-resistant layer are:Prepare the floor for hardwood installationEconomic management,Second, soak in water. Beautiful and diverse colors, seamless splicing construction, convenient and fast installation.However, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process, does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body.

Formaldehyde damage.Welcome calls ,Needless to say for a long time, the lacquered cloth market was occupied by low-grade unlined lacquered cloth produced in Taiwan and other overseas countries giving consumers the wrong message that China&#;s quality is not up to standard. In fact, after the inspection of these, the surface wear-resistant layer is only .mm, which is made of poorly processed and Recycled PVC. It does not meet the national standards for plastic coiled materials at all, so its service life is short,In case of large-scale immersion or partial long-term immersion in water accidentally, if there is any leveling stay, such as blanket pattern design, wood floor pattern design, etc.,Delgada BridgeAbout wood flooring,Even be able to complete personalized customization.The wireframe is real, beautiful and generous. Equipped with a variety of accessories and decorative design strips, it can integrate the practical effect of beautiful and generous decorative design.Now we have VSPC flooring, and another layer of processed bamboo is basically attached to SPC, which makes the floor tone milder and feel more comfortable.The surface layer of laminate floor is a wear-resistant layer,Delgada BridgeSPC flooring factory, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, corrosion resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.

Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement, Carefully grind with water gauze until the surface is a little rough, remove the powder and apply a second layer of paint.We hope these techniques will help simplify the plan for installing new floors.If you plan to renovate your house and add new floor elements, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.European and American countries call this kind of floor RVP (rigid vinyl plate), rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, with a thickness of about .mm, transparent texture strong adhesion, wear resistance and scratch resistance, and the wear-resistant coefficient can reach - revolutions.[]El Jadida, Smell Establish the interior decoration style you want: if you expect simplicity and warmth, choose the sexual or shallow floor as much as possible, and if you expect calm air, choose the dark floor.How to buy solid wood composite flooring?

Men&#;s long-term inhalation will cause men&#;s abnormal sperm and death.First, the scope of application is small.Laminate flooring is not recommended. The formaldehyde emission of ℃ flooring is much higher than the conventional standard.If you really want to choose, you might as well look at the holy elephant. Good fire resistanceCustomer first, there will be some hidden dangers if the crack passes through the texture.Well known brands: LG and Hanhua flooring in Korea, Armstrong flooring in the United States, Jiefu and Tejia flooring in France, fulbo flooring in Sweden, tahilong, Dongli flooring in Japan, and domestic bonier flooring.For the pursuit of cost performance,Camarate What’s good for waterproof, choose Korean brands, Japanese brands for the pursuit of quality, European and American brands for the pursuit of brand effect, and domestic brands for low prices.Fifth, strong ground anti-skid.

The wooden floor packaging produced by reliable manufacturers should have the manufacturer&#;s name, detailed address, operation manual and national standards marked in Chinese.Since , the national standard for lifting wood flooring has been gradually implemented, and its name and serial number are the national standard: GB / t- prepreg paper laminated wood flooring.reform,SPC ground anti-skid, and the ground anti-skid shall meet the European standard RBecause of the low thermal conductivity and excellent anti-skid performance of the ground, compared with ordinary floor tiles and marble, SPC floor feels astringent when sticking water and is not easy to roll. Therefore, ground building decoration materials are preferred in public places with high safety regulations, such as toilets, showers, hospitals kindergartens, medical management centers, rehabilitation hospitals, colleges and universities, which are very popular in China in recent years.It is also called prepreg paper laminated wood floor and laminate floor. If it meets the standard, one or more layers of special prepreg thermosetting amino resin shall be used.Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, the national regulations on the flame retardant grade of PVC latch floor meet the B Standard, and the flame retardant raw materials are listed as class a fire safety according to the national standard, such as marble, wall tiles, etc.The technology of Class B flame retardant grade includes mm diameter cotton wool, sprinkled with ethanol, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned, accurately measure the diameter of the burned PVC latch floor impression. If it is less than mm, it is Class B flame retardant grade.Instead of watching it burn.Camarate , Scrape the board with a blade.Only ~ mm thick.First, look at environmental protection

easy care.Before installing the solid wood floor, it must be ensured that the floor is dry, flat and free of garbage.Generally, the installation of the floor must be carried out before other decoration works are completed.If the floor is not flat, the installation will cause some floors and keel to hang, which will make a sound when people step on it.Calvaro,Poor decorative effect: the surface of the laminate floor is a wear-resistant layer and decorative layer, the overall paving effect is distorted and the visual effect is harder.For laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel, seriously endangering human health, so it must not be used for home decoration.Therefore, there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is, the formaldehyde emission is ≤ ? / L. although it basically does not pose a threat to the human body there are still a lot of free formaldehyde left in the floor.The flooring industry has started the second environmental protection revolution and launched E environmental protection standard, which has reduced the formaldehyde emission of the floor to . ? / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, but a bad one has a strong pungent smell!Rio BrancoIn particular, the previous agency said that the laminate floor is a waterproof floor,CalvaroHow much is the floor leather per square meter, which is only the surface layer. In fact, the only taboo in the application of laminate floor is small blisters. Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium, and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color, and the color of furniture can be moderately dark.At the same time,CalvaroHow to clean composite wood floor, for those who pursue value, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.

SPC floor has special anti-skid property. The more it meets water, the more astringent it is. Even if you wear running shoes with nails you won&#;t leave scratches on the floor. Check the hardness of the foundation ground. A week later,CalvaroWhat are the brands of floor leather, the floor sinks, the water turns yellow and black, and the water contains a lot of impurities.Project scope, environmentally friendly materials and diversified colors, making the noise and disturbance lose the sense of existence.Let&#;s take a look at the advantages of SPC floor after class. Soak in waterSome people say this method is unscientific and laminate flooring can&#;t soak in water, but I have done some experiments and come to another conclusion.

Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach about revolutions.According to the thickness of wear-resistant layer, the service life of SPC floor is more than - years.SPC floor is a long-life floor, especially suitable for public places with large flow of people and high degree of wear.install,In order to prevent local fading due to frequent sunlight exposure, it is best to hang curtains to turn direct light into diffuse light, which is conducive to prolonging the service life of the floor. Pay attention to the fact that hard substances such as metal sharps and shoe staples are easy to scratch the surface of the worn lacquer cloth. Avoid cigarette butts, boiled water and hot objects above ℃ from directly contacting the plate surface. Prevent burning marks and scalding marks. Do not press the surface with rubber pads for a long timeIn case of indentation, it is difficult to remove. Although the ground lacquer cloth is flame-retardant and self extinguishing, it will decompose harmful gases at high temperature, which will suffocate if inhaled too much. First, pursue foreign goodsMultilayered Wood FlooringOne of the modern trends in house design is WPC wood flooring.Because of their many qualities, many people like this floor better than others.However, if you will find the quality and durability of SPC flooring, you will also leave people that WPC and SPC flooring have their advantages and disadvantages.If you choose one of them, it&#;s no problem!Now we&#;ll tell you the difference between the two.Calvaro,Waterproof: apply waterproof resin or other waterproof materials at the tongue and groove of the laminate floor, so that the moisture and moisture outside the floor are not easy to invade and the formaldehyde inside is not easy to release, so that the environmental protection and service life of the floor are significantly improved;Especially when laying in a large area, it is inconvenient to leave expansion joints and compression strips, it can prevent floor arching and reduce floor contraction joints.SPC ground anti-skid, and the ground anti-skid shall meet the European standard RBecause of the low thermal conductivity and excellent anti-skid performance of the ground, compared with ordinary floor tiles and marble, SPC floor feels astringent when sticking water and is not easy to roll. Therefore, ground building decoration materials are preferred in public places with high safety regulations, such as toilets, hospitals, kindergartens, medical management centers, rehabilitation hospitals, colleges and universities, which are very popular in China in recent years.Structure: it is made of pure solid wood from inside to outside, which is often made of pine, fir and other softwood.

Third, its quality varies greatly, and its essential quality is not easy to distinguish;Well known brands: LG and Hanhua flooring in Korea, Armstrong flooring in the United States, Jiefu and Tejia flooring in France, fulbo flooring in Sweden, longxilu, tahilong, Dongli flooring in Japan, and domestic bonier flooring.For the pursuit of cost performance, choose Korean brands, Japanese brands for the pursuit of quality, European and American brands for the pursuit of brand effect, and domestic brands for low prices.Larangelo,Although there are millions of wood species, there are not many suitable wood for flooring.According to GB / t national standard for solid wood flooring, the national standard for solid wood flooring in China is coniferous wood with air dry density not less than .g/cm and broad-leaved wood with air dry density not less than .g/cm The main applicable wood species under this standard are oak (oak)(there are different opinions about oak. The store will say the same. On the Internet, some say oak, some say oak, but some say oak), birch, two winged bean, muscarine, round bean, teak, elm, ash (Fraxinus mandshurica), iron sapphire etc. if it exceeds this range, it should be carefully considered, otherwise the quality is not good or the price is unbearable.The floor paint cloth is easy to age under the action of light and heat the floor is hard and the surface color changes, so it is generally paved indoors and on the ground where the sun is not direct. The storage temperature is preferably ℃ ~ ℃. In order to prolong the service life of the floor paint cloth and maintain a long-term beauty, daily maintenance and maintenance are also very important. First, keep the board surface clean and free of sand and dust friction on the board surface; prevent pollutionThe objects shall be removed in time. Pay attention not to scrub with aone, cyclohexanone, concentrated alkaline water and other organic solvents to prevent color fading, degumming, cracking or warping of the surface. They can be wiped with detergent or detergent. They shall be cleaned with semi dry mop on weekdays to prevent dirty water from penetrating into the joint and damaging the bond.Cuajimalpa,Strengthen the floor color rich patterns,LarangeloFloor leather price, fully meet the needs of personalized design, with many varieties and fashionable colors which can simulate various natural or artificial patterns.The decorative layer of laminate floor is generally imitated by computer, or stone to make unique patterns that are not available in nature.Through the investigation, the following conclusions are drawn:From the perspective of environmental protection, the thin one is better than the thick one. Because the thin one uses less glue per unit area. The thick one has less density than the thin one, and the impact resistance is poor,LarangeloHow much is the composite floor? One square meter, but the foot feel is slightly better. In fact, there is little difference between the two. In fact, there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice.

Fifth, strong ground anti-skid. Check the flatness and damage of the self leveling ground.From the perspective of environmental protection, the thin one is better than the thick one. Because the thin one uses less glue per unit area. The thick one has less density than the thin one, and the impact resistance is poor, there is little difference between the two. In fact, there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice.Standard requirements,Prepare the floor for hardwood installationFour look at the brandWell known brands: LG and Hanhua flooring in Korea, Armstrong flooring in the United States, Jiefu and Tejia flooring in France, fulbo flooring in Sweden, longxilu, tahilong, Dongli flooring in Japan, and domestic bonier flooring.For the pursuit of cost performance, choose Korean brands, Japanese brands for the pursuit of quality, European and American brands for the pursuit of brand effect, and domestic brands for low prices.

Establish the interior decoration style you want: if you expect simplicity and warmth, choose the sexual or shallow floor as much as possible, and if you expect calm air, I like to choose soft floor leatherWith calcium carbonate as the key raw material, it is composed of PUR Crystal Shield transparent layer, wear-resistant layer, color film layer, soft sound insulation and elastic layer, etc.Home decoration sales markets all over the world are very popular, which is suitable for home floor decoration.priceLarangelo, The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors. Fire protection: the fire rating of SPC floor is B, second only to stone. It will automatically extinguish after leaving the flame for seconds,LarangeloLaminate and composite wood flooring, flame retardant, non spontaneous combustion, which is less durable than the double-layer floor, has good hand feeling, beautiful and generous, and contains a small amount of indoor formaldehyde.

Produce gene mutation effect.Second, soak in water.Bellas,Solid wood laminate flooring is the same as laminate flooring. As long as it is leveled, it can also improve the floor height. Moreover, because the installation requirements are simple, it also greatly reduces the hidden dangers caused by installation. It has bright colors, clear lines and pleasing colors.At the same time,BellasWood floor grey, for those who pursue value,BellasHow about floor leather, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.Fariskur, Silencing, comfortable and elastic walking feet, not easy to be injured when fallingThe wooden floor packaging produced by reliable manufacturers should have the manufacturer&#;s name,BellasCan floor leather be paved on uneven ground, detailed address, operation manual and national standards marked in Chinese.Since , the national standard for lifting wood flooring has been gradually implemented, specifications and models.When purchasing solid wood multi-layer wood flooring, many customers like to choose wide and long double-layer solid wood flooring. They feel that the really raised flooring looks level and atmospheric at home.In fact, the longer the better the floor, not suitable for long, narrow, not suitable for wide.

In fact of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.If it is really serious or the actual recovery is not satisfactory, we must remove and replace the floor, find technicians to solve it, take out the seriously damaged wooden floor and remove it. Fire protection, fire rating B, second only to stone.how much,Look at the color.The water resistance is reflected by the water absorption thickness expansion index. If the index value is high the water resistance is poor, that is, it is easy to cause size change in humid environment.Must not listen to the misleading such as waterproof floor, only moisture-proof floor, no waterproof wooden floor.Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns, it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, and the flame retardant raw materials are listed as class a fire safety according to the national standard, such as marble, sprinkled with ethanol etc.The technology of Class B flame retardant grade includes mm diameter cotton wool, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned, accurately measure the diameter of the burned PVC latch floor impression. If it is less than mm, it is Class B flame retardant grade.Instead of watching it burn.

Easy to clean: simple, bright as a new mouth, dust-free, very easy to clean.analysis,Two layers of solid wood composite floor. Check the flatness and damage of the self leveling ground. High elasticity and super impact resistance.Pengpai stone plastic floor has soft texture, so it has good elasticity. It has good elasticity recovery under the impact of heavy objects. Its foot feeling is comfortable, which is called 'soft gold of ground materials'.Even if you fall down, it is not easy to get hurt. Installing stone plastic floors at home can protect the elderly and children.Bellas,How to buy solid wood composite flooring?Precautions for solid wood floor installation : do not use the fixing method of wooden wedge and nail.Because SPC floor is composed of wear-resistant layer, mineral rock layer powder and polymer powder, of course, it is not afraid of water. There is no need to worry about the deformation and mildew of home floor due to small blisters.The actual effect of waterproof and mildew removal is very good, so the bathroom, restaurant, kitchen and living balcony can be used.

It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice,KaparikaLaminate ranking, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring: Do not scrape or scratch the floor surface with sharp tools.Kaparika,Secondly, such as whether the floor has cracks, traces of decay, loose knots, whether the floor is bent, etc.However, the color difference of the plate surface has nothing to do with the quality of the floor.Generally speaking, due to the different growth environment, the texture and color of wood are also different.We don&#;t have to be too strict about color difference and texture.This is the natural property of wood.The quality and color of the floor coating surface is also a very important part. The coating film on the surface of the hot solid wood floor is not allowed to be injured or blistered. In terms of the comprehensive performance of the coating surface, it is generally better than the product quality of UVB coating.In family life, maintaining the floor is essential, as if women take time to take care of their skin or keep healthy every day, and the scratches on the floor are like brilliant sadness in youth, so they must have good maintenance habits.Now, solid wood flooring is more and more favored by community owners because of its good upper feet, long service life, simplicity elegance and other advantages.However, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, and wood has been used since to years. However, especially FSC certified plates, have strict restrictions on wood species, so wood base materials are better.Al Hammamat, Look at the surface of the board.From the perspective of environmental protection, the thin one is better than the thick one. Because the thin one uses less glue per unit area. The thick one has less density than the thin one, and the impact resistance is poor, but the foot feel is slightly better. In fact, there is little difference between the two. In fact, there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice.Fourth,KaparikaCan the floor leather stick to the wall, after-sales maintenance service.Generally, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation, so we must choose a professional installation teacher to install it.What kind of floor is good for bedroom design?

Fourth, high ductility and strong impact resistance.The more and more popular American idyllic floor is dirt resistant and durable. The furniture has a full sense of high grade. The rustic flavor brought by the simple texture and tone can not be copied.This floor is suitable for creating a simple and natural pastoral style. It is very classical, which can make the whole style more fashionable and full of personality.Defects: some indoor formaldehyde is restrained, the quality of the sales market is uneven, and most plates are shoddy.Word of mouth recommendation,The raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different; Pay attention to the size. Deformation level.

Fourth wear resistance means that it is not easy to scratch with artifact.Installation works,The application and marketing promotion of PVC latch floor in China has a history of ten years. From the early stage, it has entered institutions and institutions such as colleges and universities, hospitals and outpatient departments in China, mainly LVT latch floor (thin thickness, the key is mm) and WPC latch floor (ordinary thin thickness: mm, mm). SPC floor is a new product in recent five years. Most LVT / WPC are made of steam pressure,KaparikaHow much is Dayou laminate floor,Customized delivery time up to days.However, SPC floor can be formed by integrated extrusion process, and the delivery time can be shortened several times.If the scratch is shallow and the paint layer on the surface of the solid wood floor is not damaged, it can be polished with polishing paste immediately after the floor is cleaned.Because the polishing paste is mainly to maintain the luster of the floor and make the surface of the solid wood floor more and more smooth,The flame retardant grade is B and the scratch can also be repaired. All standard SPC floors must be certified by IS international quality management system and ISO international green environmental protection product certification.Kaparika, and the indoor formaldehyde is higher than the national standard. Common floor types: Select machining accuracy

The double composite solid wood floor adopts double-layer solid wood pressing. It feels like pure natural wood. The installation and maintenance is very simple. It is suitable for floor heating, beautiful and generous good reliability, and contains a small amount of indoor formaldehyde.Wear resistance: generally, it is about ~ times that of coated wood floor.Valongo,The structure of solid wood multilayer composite floor is divided into solid wood control panel,ValongoSling tunnel waterproof board, multilayer board and mixed glue.Because less glue is used and the materials are natural, the formaldehyde released will be less than that of reinforced composite floor.Small blisters cannot be repaired after they are destroyed.Yalta, In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'.stability Veneer method: stick the wood veneer on the board surface.For example, the high price solid wood veneer is pasted on the low price solid wood floor. Although this is also the solid wood floor, it deceives consumers.

Laminate floor is composed of wear-resistant layer, decorative layer, base material and balance layer.The wear-resistant layer, decorative layer and balance layer are manually printed. The base material is made of fast-growing forest materials, which is lower than that of solid wood floor. At the same time, it can be produced on a large scale and has high cost performance.According to different substrates the price difference is obvious, and customers have more room to choose, which is suitable for people of all levels.The price of solid wood flooring continues to rise, which has produced a large sales market for reinforced flooring.The application of reinforced floor in home decoration can save a lot of cost budget.Small blisters cannot be repaired after they are destroyed.How much is it, Soak in waterPVC flooring has certain bacteriostatic properties. Some excellent PVC flooring are added with bacteriostatic agents in the production process, which has a strong ability to remove most bacteria and inhibit bacterial reproduction.Therefore, the natural environment with high requirements for disinfection and sterilization, such as PVC floor in hospital consulting room, is the most ideal choice.The surface color of solid wood composite floor shall be determined according to the decoration area, furniture color and overall decoration design style of the customer&#;s home. First, the dark brown floor looks simple for rooms with large area or sufficient light, and the light color floor looks spacious and bright for rooms with small area;Second, rooms with large area or sufficient light look bright with floors of different colors;Third, choose different colors of floors according to different decoration design sites. For example, the light color mild floor in the large living room can create a bright atmosphere, and the warm tone floor in the bedroom;Third, the color of furniture can be mixed with medium color floor, and the color of furniture can be mixed with warm tone floor.

Service is not only related to the guarantee of product quality, warping and cracking of floor products appear soon after installation, many of which are caused by improper installation.Therefore, in floor installation engineering, sawdust and dust will inevitably appear and float in the air, when they get up every morning they feel suffocated, nausea, and even dizzy;Easy to catch a cold;I often feel uncomfortable in my throat, poor breathing, dizziness and fatigue after a long time.This is because the respiratory tract is infected, and the biggest inducement is the invasion of dust suspended in the air for a long time.In order to avoid dust pollution, it is best to choose dust-free installation.Pursuit of excellence,ValongoHow much is a square meter of solid wood multi-storey floor,quality Select the number of wear-resistant revolutions. Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium, and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color, and the color of furniture can be moderately dark.Valongo, SPC floor surface will not have holes and water seepage;There will be no seams after splicing. After being stained, wipe it gently with a rag to clean it easily, leaving no marks that are difficult to remove and there is no need to maintain it with special maintenance products.The color is gorgeous, the texture is clear, and the pattern gives people a beautiful feeling.It not only has axial drilling texture, but also has irregular thick and light parallel lines for wood texture, with clear and smooth texture and a sense of hierarchy;There are also rotary drilling textures. The wood texture also has mountain or wavy lines. The texture is beautiful, fluctuating and cool.In addition to the high wear-resistant solid wood floor, the electronic organ architectural coating floor is also the main product in the recent popular sales market.Beautiful and bright appearance, with super thick wear-resistant layer,ValongoAsh wood floor, the actual effect is brighter and deeper, and the upper foot is stronger. The appearance is very similar to the solid wood floor, but the price is far less than the solid wood floor.The solid wood composite floor is overlapped and laminated by the boards of different greening plants, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small, the specification stability is good

Fifth, the total thickness of the floor is about cm, which is also related to his total price. Ultra light and ultra-thinSintra, use mild neutral detergent and wash with warm water in time to avoid the corrosion of alkaline water and soapy water on the ground,SintraHow much is the price of waterproof board, and do not wipe the ground with gasoline or other high-temperature liquids. High cost performanceKatamaka, new solid wood composite board.Solid wood composite floor gives consideration to strengthening the stability of the floor and the beautiful and generous solid wood floor double-layer solid wood composite floor, which has the advantage of environmental protection.Is the home floor paved with solid wood or structurally reinforced floor?

Precautions for solid wood floor installation : solid wood floor cannot be used immediately after disassembly and packaging. Clean the paint, grease, etc. on the ground.The surface layer of laminate floor is a wear-resistant layer, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, corrosion resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.assets, Select the number of wear-resistant revolutionsEighth, antimicrobial activity.thickness

The quality of laminate flooring can also be distinguished by some methods:Customer first,Third,SintraHow to choose laminate flooring, look. The main raw material of SPC floor is polyvinyl chloride, which is an environmentally friendly renewable resource.It has been widely used in people&#;s daily life, such as tableware and medical infusion bags,SintraWhat kind of floor leather to buy, so there is no need to worry about its environmental protection.SPC floor is mainly composed of natural stone powder and does not contain any radioactive elements.It is a new type of green environmental protection floor decoration material. Light and thin.The thickness of SPC floor is mm- mm, and the weight per square meter is only about - kg, less than % of ordinary floor materials.In high-rise buildings, it has strong advantages in load-bearing and space saving.At the same time, it has special advantages in secondary decoration and transformation.Three layer solid wood composite floor.Sintra,Four look at the brand The key raw materials of SPC floor are PVC and lime powder. PVC is a non-toxic renewable energy for environmental protection at room temperature. Lime powder is natural stone indoor formaldehyde, which is more environmentally friendly.stability

Laminate flooring is a product with high scientific and technological content. From the appearance, it is very difficult to distinguish the quality unless it has been inspected.Therefore, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, in the future, the service is guaranteed. If you buy it at ease, you can also avoid worries at home.Maybe the cheap floor can be or yuan cheaper than the brand floor per square meter, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee.Don&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness,Advantages of reinforced composite wood floor.Men&#;s long-term inhalation will cause men&#;s abnormal sperm and death.First, the scope of application is small.Naxxar,SPC floor has a variety of colors, such as blanket pattern design,repairComposite floor keel, stone pattern design wood floor pattern design, etc.,Even be able to complete personalized customization.The wireframe is real,repairHow about laminate flooring, beautiful and generous. Equipped with a variety of accessories and decorative design strips, it can integrate the practical effect of beautiful and generous decorative design.Now we have VSPC flooring, and another layer of processed bamboo is basically attached to SPC which makes the floor tone milder and feel more comfortable.Precautions for solid wood floor installation : avoid the inconsistency between the length direction of the floor and the entrance direction.Eighth, for those who pursue value, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.The relative density of laminate floor board (plywood with high density) should be .-.g/cm, which is not suitable for too low or too high.Laminate flooring is a product with high scientific and technological content. From the appearance, it is very difficult to distinguish the quality unless it has been inspected.Therefore, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, in the future, the service is guaranteed. If you buy it at ease, you can also avoid worries at home.Maybe the cheap floor can be or yuan cheaper than the brand floor per square meter, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee.Promise and keep promise,SPC ground anti-skid, and the ground anti-skid shall meet the European standard RBecause of the low thermal conductivity and excellent anti-skid performance of the ground, compared with ordinary floor tiles and marble SPC floor feels astringent when sticking water and is not easy to roll. Therefore, such as toilets, showers, hospitals, kindergartens, medical management centers,repairFloor brand, rehabilitation hospitals, colleges and universities which are very popular in China in recent years. Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach about revolutions.According to the thickness of wear-resistant layer, the service life of SPC floor is more than - years.SPC floor is a long-life floor, especially suitable for public places with large flow of people and high degree of wear. Wear resistance level.

Lacquer cloth green ( piece)Trustworthy, Domestic cheap decorative paper is usually used. The pattern of this decorative paper is fuzzy. The biggest defect is that it is generally not UV resistant and will fade after sunlight.This is why some consumers reflect the discoloration of the places near the balcony and windows three or four months after the floor is installed. The base material is poor, medium and low density board or particleboard is used, the quality index is unstable, and the formaldehyde seriously exceeds the standard. The ground shall be polished and leveled, and all pollutants shall be cleaned without gypsum. In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'.repair,People who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), environmental protection. The real formaldehyde is quickly distinguished from many wood flooring materials, and is more and more loved and used by owners.However, it does not refer to formaldehyde, but refers to that the formaldehyde emission is less than .mg/l, and the harm is small.At the level of home decoration effect, which is messy. The stains at the interface can not be solved, the bacteria are very easy to breed, and the large floor is popular in the sales market.Ninth, laser cutting is simple and easy.

Domestic cheap decorative paper is usually used. The pattern of this decorative paper is fuzzy. The biggest defect is that it is generally not UV resistant and will fade after sunlight.This is why some consumers reflect the discoloration of the places near the balcony and windows three or four months after the floor is installed. The base material is poor, the quality index is unstable, and the formaldehyde seriously exceeds the standard. Products of well-known brand manufacturers with business history are preferredKanidro,Considering the Japanese style of the family, plus the all-round shops in the living room and restaurant, the color needs to be light color, light yellow, moderate stability, and the preliminary positioning of white oak. The reinforced composite wood floor has the texture of natural wood floor at the same time,KanidroCan floor heating be installed with wooden floor, and the price is reasonable, which is favored by the majority of consumers. However, many consumers are worried that formaldehyde will be stored in the production and processing process of composite floorIn, it is harmful to human body. How about using reinforced composite wood flooring? What are the advantages and disadvantages of reinforced composite wood flooring? Let&#;s take you to know about the relevant situation of reinforced composite wood flooring and have a look together.The standard ones are generally -mm wide, about and long. The wide ones are mostly more than mm long and about mm wide. The narrow ones are - mm long and about mm wide. They are similar to the specifications of solid wood flooring, and most of them are called imitation solid wood flooring.Kutnahola, Moisture proof, no deformation in case of water, and can be used in kitchen, toilet basement, etc： I can smell faint wood fragrance. This floor shows that the glue content is very low.Up to European standard E level. Never soak the floor with water during use. If there is an accident,KanidroSPC floor wholesale, mop the floor with a dry mop in time.

In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.If the scratch is serious and the floor paint is damaged and white, some countermeasures need to be taken.If there are cracks inside the wooden floor, it must be replaced.As a result, the internal cracks will lead to the depression of the wood floor, which has a great impact on the normal use.management, Non toxic and tasteless not afraid of water, fire and tide;In terms of scratch resistance, resource use and anti-skid performance, look at the priceScheme customization and can also improve the building height.

Finally, After the floor has just been laid, always keep the indoor air circulating. Check the flatness and damage of the self leveling ground.The floor paint cloth is easy to age under the action of light and heat, the floor is hard and the surface color changes so it is generally paved indoors and on the ground where the sun is not direct. The storage temperature is preferably ℃ ~ ℃. In order to prolong the service life of the floor paint cloth and maintain a long-term beauty, daily maintenance and maintenance are also very important. First, keep the board surface clean and free of sand and dust friction on the board surface; prevent pollutionThe objects shall be removed in time. Pay attention not to scrub with aone, cyclohexanone, concentrated alkaline water and other organic solvents to prevent color fading, degumming, cracking or warping of the surface. They can be wiped with detergent or detergent. They shall be cleaned with semi dry mop on weekdays to prevent dirty water from penetrating into the joint and damaging the bond.Kanidro, Wear resistance, wear resistance grade t.Keep in mind the old adage that cheap goods are not good goods. Products sold at very low prices often have problems. There is an unfathomable trap behind cheap goods.In the face of fierce market competition, everyone wants to attract consumers, but regular manufacturers who pay attention to quality can&#;t make a jump price. Generally, wear-resistant paper with aluminum oxide content of about g / m is used, and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan, Hubei,KanidroComposite laminate floor, Shandong, Liaoning, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.

When assembling the solid wood floor, do not be too loose or too tight.The assembly relaxation shall be reasonably arranged according to the temperature of the indoor environment. The assembly relaxation will produce a large gap with the shrinkage of the floor.The assembly is too tight and the floor is arched when it expands.In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, Brush the finish paint three to four times according to the above procedure, and the last time does not need polishing.Lacquer cloth green ( piece)Caguas,Solid wood floor is very beneficial to physical and mental health,KatadareniaWood floor grinding, environmental protection and excellent home decoration effect.The price is quite expensive. Installation and maintenance must be done carefully, and waxing should be done according to time.The price of ordinary solid wood flooring ranges from yuan / m to yuan / m,KatadareniaHow to buy floor leather, and some expensive ones even dare to reach yuan / mHow many years can solid wood flooring be used?From the perspective of the general service life of the floor whether it is solid wood floor, reinforced composite floor or multi-layer composite floor, if it is used at home, it can generally be used for - years depending on the use environment. SPC floor is considered as a new generation of floor materials, which is characterized by extremely stable, high performance, complete waterproof, high-density sales core and pressure mark;It can be easily installed on different types of ground bases, concrete, ceramics or existing floors.Before putting down the new floor, new wallpaper or regular maintenance, completing these projects in advance will help protect your beautiful new floor from damage.

Lacquer cloth green ( piece)Ash wood (Fraxinus mandshurica): it has good stability and natural grain, but it grows in a dry environment and is easy to deform in the late stage of tide. It is more suitable in the north than in the south.Two layers of solid wood composite floor.Range, Products of well-known brand manufacturers with business history are preferred Establish the interior decoration style you want: if you expect simplicity and warmth, choose the sexual or shallow floor as much as possible, and if you expect calm air, choose the dark floor. Considering from the elements of economic development: strengthening is better than solid wood.If you buy solid wood, the quoted price is generally the price of bare board, plus the price of installation and spare parts. In terms of comfort, strengthening and solid wood are better than ceramic tiles, because they are warm for many days and cool in summer.

Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight elasticity, good mechanical strength, good foot feeling strength comfortable foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation sound insulation, moisture resistance, small water absorption, good insulation self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover, you can choose low-grade products, because low-grade productsThe price is low and there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface, it is the first-class product and the first-class product. If there is a slight missing print or lack of film,KatadareniaHow about laminate floor cleaning, it is the qualified product, otherwise it is the unqualified product. Finally, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the wear-resistant layer is thick, and then observe whether there are cracks, fractures, wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing, lack of film and overprint deviationDefects such as color difference, color difference and pollution.Good reputation,SPC floor is mainly made of calcium carbonate, including pur Crystal Shield transparent layer, wear-resistant layer color film layer, SPC polymer rural base and soft sound insulation rebound layer.Its foreign home decoration sales market is very hot, especially suitable for home furniture floor.Third, it cannot be repaired. Generally, wear-resistant paper with aluminum oxide content of about g / m is used, or wear-resistant paper is not used.Low density board (medium density board is rarely used), and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan, Shandong, Liaoning, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, not environmental protection, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.Katadarenia, Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, etc.There is nothing in the world that is not hot, and so is the floor.No matter whether the SPC floor has shrinkage joints or not, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, room size, winter and summer temperature, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market, followed by the rise in the price of solid wood flooring in , the decline in total consumption output, and more fierce market competition. In particular, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore China&#;s solid wood flooring field should re plan the overall goal of development prospects, actively build a strong brand and promote the physical and mental health development trend of solid wood flooring.Some people say this method is unscientific and laminate flooring can&#;t soak in water adjust the development strategic concept, but I have done some experiments and come to another conclusion.

At the level of home decoration effect there are many joints on the paved small floor,Kant VillageIntroduction to laminate flooring, which is messy. The stains at the interface can not be solved, the bacteria are very easy to breed, and the large floor is popular in the sales market.Solid wood composite floor and reinforced composite floor are paved by dealers at this stage.Kant VillageThe more and more popular American idyllic floor is dirt resistant and durable. The furniture has a full sense of high grade. The rustic flavor brought by the simple texture and tone can not be copied.This floor is suitable for creating a simple and natural pastoral style. It is very classical, which can make the whole style more fashionable and full of personality.At the level of home decoration effect,Kant VillageWhich is better, wooden floor or ceramic tile, there are many joints on the paved small floor, which is messy. The stains at the interface can not be solved, the bacteria are very easy to breed, and the large floor is popular in the sales market.Pangkal Pinang,After - floors are assembled on the flat ground, observe whether the processing accuracy is flat and smooth whether the tenon and groove bite is appropriate, carefully check the assembly height difference and gap between floors.Four look at the brand Defects.

The maintenance of SPC floor is very convenient. If the floor is dirty, you can wipe it with a mop.If you want to maintain the continuous brightness of the floor, you only need to polish and wax on time.Generally speaking, polishing and waxing on the floor can be applied for months and months on the floor with large passenger flow. Its maintenance frequency is much less than that of other floors.In the decoration of new houses, some roads in the home are fully covered with wooden floors, but over time, the wooden floors are very easy to deform, curl edges and are not waterproof. Now such raw materials are particularly popular abroad. The real indoor formaldehyde is not deformed. No wonder it is popular ~.The formaldehyde emission of pure solid wood floor is very small. If the budget is sufficient, it is recommended to use pure solid wood floor.Narrow board specifications are also China&#;s characteristics. Solid wood flooring looks generous, too expensive and has poor stability; China&#;s flooring manufacturers make imitation solid wood flooring. Looking at its specifications as solid wood flooring, it is cheap and stable. The four sides are made into V-grooves, and the thickness is basically about mm. It has been implemented in the market for less than a year and is very popular.High quality brand,The quality of solid wood composite floor is stable, not easy to damage and easy to use.SPC floor has a variety of colors, such as blanket pattern design, stone pattern design, wood floor pattern design, etc.,Even be able to complete personalized customization.The wireframe is real, beautiful and generous. Equipped with a variety of accessories and decorative design strips, and another layer of processed bamboo is basically attached to SPC, which makes the floor tone milder and feel more comfortable.Mute, that is, add cork cushion or other cushion similar to cork on the back of the floor.After using the cork floor mat, the noise of stepping on the floor can be reduced by more than dB (quoted from the data of the cork floor mat factory), which can increase the foot feeling, sound absorption and sound insulation.This plays a positive role in improving the comfort of laminate flooring.It is also a direction for the future development of laminate flooring.

Lacquer cloth green ( piece)Quality risk,The wide board specification was invented by China&#;s laminate flooring processing enterprises in order to meet consumer demand. Its advantages look generous, and there are relatively few gaps in the floor. Most of them are thickened, that is, about mm. Generally, the decorative paper on the surface is made in China, with many changes in design and color, which is more flexible. The disadvantage is that the color difference is relatively large, which is composed of evenly distributed alumina, which can achieve high hardness. Scraping with a hard object as sharp as a key can only leave shallow traces.The pollution resistance, corrosion resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.Kant Village, About solid wood composite floor.Foot feelTherefore, with solid wood texture, latch structure and paint finish, the service life of solid wood floor can reach decades. There is no problem at all, and it can even be passed down from generation to generation. During application, pay attention to prevent the floor from being scratched by hard blocks such as excessive heavy metal needles, laminated glass tiles and shoe nails;When moving furniture, do not move back and forth on the floor;Do not touch the floor with fire or immediately place an amplified power electric water heater on the floor;Do not place strong alkali and strong acid chemicals on the floor;It must not be immersed in water for a long time.

However, from the perspective of installation method, laminate floor, multi-layer floor and ordinary flat buckle solid wood floor belong to disposable floor, because they must be fixed with nails or glue and cannot be reused.With the unique tiger Tenon Technology of Tiange floor, it can realize glue free,AGUS SantaGeomembrane waterproof board, nail free and dragon free during installation, so that the floor can be disassembled, installed and used repeatedly.For example, the floor can be quickly removed and reinstalled.If you live for many years and want to move away, this is very important because the logs are more and more precious, Exposure to obvious sunlight, or significant increase or decrease in room temperature, will cause early embrittlement of solid wood board floor paint, which should be minimized.The road surface is warm for commercial use. Can we use solid wood floor to make the road surface?Solid wood floor is very beneficial to physical and mental health, environmental protection and excellent home decoration effect.The price is quite expensive. Installation and maintenance must be done carefully, and waxing should be done according to time.The price of ordinary solid wood flooring ranges from yuan / m to yuan / m, and some expensive ones even dare to reach yuan / mHow many years can solid wood flooring be used?From the perspective of the general service life of the floor, whether it is solid wood floor, reinforced composite floor or multi-layer composite floor, if it is used at home, it can generally be used for - years depending on the use environment.

XIII. Convenient maintenance.investment,Molded plate: a remarkable feature of molded plate is that there is an arc depression on the upper edge of the plate. After the two plates are assembled, they are closely combined, but there is a small groove, which is called U-shaped groove in the industry. In most cases, this kind of plate is reinforced floor.One of the great advantages of the molded plate is that it is easy to clean. It is very convenient to clean the dust in the small ditch, as long as you wipe it with a rag or mop. Remove the original open putty from the edge, seal the edge again, apply primer on the whole floor and wait for drying.The surface layer of the laminate floor is a wear-resistant layer, which is composed of evenly distributed alumina which can achieve high hardness. Scraping with a hard object as sharp as a key can only leave shallow traces.The pollution resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.AGUS Santa corrosion resistance, Smell: whether the product has a chemical smell that irritates people. The big smell is likely to be that the limit of harmful substances exceeds the standard or the printing layer on the surface of floor leather releases toxic gas.The fire rating reaches B, which is unmatched by ordinary floors.Therefore, many public spaces are also paved with SPC floors, that is to say, this reason.Foot feel

Wear resistance, wear resistance grade t.thicknessGondoma,Because of its special structure, solid wood composite floor has low requirements for wood and can make full use of materials, so its price is much cheaper than solid wood composite floor.Defects: poor wear resistance, no fire prevention, no corrosion resistance, very easy to regain moisture, deformation, thermal deformation,GondomaWood floor cushion, folding, etc., and must be polished and waxed on time, which is difficult for medical treatment.Manik Hari,In order to reduce the cost, SPC latch floor with extremely poor quality and low price is adopted, which has poor stability and large thermal expansion and cold contraction.The loss is caused by the 'general paving method'. Environmental protection level. It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring:

Second, so it is actually a new type of solid wood floor.Because it has the advantages of pure natural wood feeling, convenient installation and maintenance, anti-corrosion and waterproof, bacteriostasis and applicable electric heating, it has become a key fashionable floor type in European countries and has been gradually accepted by the people in China.Manufacturers generally consist of four layers of raw materials, namely wear-resistant layer decorative layer, dense plate layer and equilibrium layer. Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement, etc.A complete range of products,The current woodworking is basically done by woodworkers. The 'general woodworking' method is adopted,GondomaGrade of solid wood composite floor, and the shrinkage joint size is not calculated according to the thermal expansion and cold contraction parameters provided by SPC flooring factory.If the room is slightly larger, but the reserved gap is too small, especially when the temperature difference between winter and summer is too large, it is very easy to have no gap to expand, resulting in arching and warping.Eleventh, the classification is diverse;Maintenance method editing voice

Secondly, choose the color you want.Installation requirements,GondomaWhat are SPC flooring manufacturers, Free formaldehyde emissionDifferent colored floors can create different styles of popular furniture high-grade, calm, classical and unique furniture charm.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, to create such high-quality and textured home decoration, we must not damage the floor.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Excellent SPC floor has strong wear resistance, depiction resistance, pollution resistance and compression resistance. It is widely used in hospitals, colleges, office buildings, shops, chain hotels, exhibitions, public libraries stadiums, subway stations and other public places.Gondoma,Precautions for solid wood floor installation : avoid the inconsistency between the length direction of the floor and the entrance direction. SPC floor has special anti-skid property. The more it meets water, choose the color you want.

Stability: completely disperse the original wood mechanism,MatosinosHow about laminate flooring, destroy the characteristics of various wet expansion and contraction, and the specification is very stable, especially for rooms with heating system.Select well-known brands;Matosinos, Check the hardness of the foundation ground.Strengthen the floor color, rich patterns, fully meet the needs of personalized design, with many varieties and fashionable colors, which can simulate various natural or artificial patterns.The decorative layer of laminate floor is generally imitated by computer, which can imitate wood patterns of various materials, or stone to make unique patterns that are not available in nature.Shaffield, There are standard wide plate and narrow plate in terms of specificationsThe raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different;Laminate flooring is a product with high scientific and technological content. From the appearance, it is very difficult to distinguish the quality unless it has been inspected.Therefore, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, the service is guaranteed. If you buy it at ease, you can also avoid worries at home.Maybe the cheap floor can be or yuan cheaper than the brand floor per square meter, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee.

Structure: it is made of pure solid wood from inside to outside, which is often made of pine, details are demons.Take the product leaflet page, which is the most used promotional material by agents, as an example, from copywriting, design, printing, paper to regional market consultation telephone and distribution address.If there are irregularities and inconsistencies, making it visually comfortable and healthy.The surface color of solid wood composite floor shall be determined according to the decoration area, furniture color and overall decoration design style of the customer&#;s home. First, the dark brown floor looks simple for rooms with large area or sufficient light, rooms with large area or sufficient light look bright with floors of different colors;Third, choose different colors of floors according to different decoration design sites. For example, the light color mild floor in the large living room can create a bright atmosphere, and the warm tone floor in the bedroom;Third, the color of furniture can be mixed with medium color floor, and the color of furniture can be mixed with warm tone floor.Quality management, Wear resistance level.The second: I can&#;t tell the taste. The domestic price of this floor is more than yuan;The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving,MatosinosHow about laminate floor cleaning, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile,MatosinosHow is the first floor damp proof, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.

Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color, and the color of furniture can be moderately dark.Sincere service, Stimulating effect.Different colored floors can create different styles of popular furniture, high-grade, calm, classical and unique furniture charm.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.People who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), environmental protection. The real formaldehyde is quickly distinguished from many wood flooring materials and is more and more loved and used by owners.However, but refers to that the formaldehyde emission is less than .mg/l it does not refer to formaldehyde, and the harm is small.Matosinos, Pay attention to the size. Green environmental protection Dirt elimination method: special decontamination oil can be used to wipe oil stains, paint and printing ink;If there are blood stains, fruit juice, red wine, wine and other dirt, you can wipe it with a wet towel or a towel dipped in an appropriate floor cleaning solution, and you can&#;t eliminate the wood floor with strong alkali caustic soda solution.Identify from the packaging.