Remove the pavement and remove dust to avoid the accumulation of crushed stones or friction coefficient floating dust on the floor surface.The shoe sole can be placed at the door to prevent broken stones or friction coefficient dust from being brought into the room.Generally, when cleaning the floor, you can wipe the road surface with cotton strips.Do not wipe the floor with wet mop or corrosive liquid (such as soap liquid and vehicle gasoline). In order to better improve the indoor air quality humidity, humidification equipment can be selected in autumn and winter to maintain the indoor air quality humidity at % - %.When moving furniture, you can&#;t push and pull the door on the ground immediately. You should stretch out and remove it with care.The bottom of furniture that moves frequently should be pasted with an eraser.Select well-known brands;Delgada Bridge,Because the whole family decoration process will use a lot of raw materials such as solid wood plates and plywood, as well as a lot of wooden furniture, it is easy to grow insects when encountering appropriate temperature and environmental humidity, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.Surin, SPC floor material is soft and has good ductility. Under the impact of hanging objects, the ductility recovers well, and the upper feet are comfortable and happy. Stimulating effect.Defects: small blisters can not be repaired after damage, and the upper foot is poor.

The surface layer of SPC floor has been solved by pur Crystal Shield, with good thermal insulation performance. It will not be cold even if barefoot steps on it. It is very comfortable. Coupled with the rebound technical layer, it has good flexibility.Even if you keep bending degrees, you don&#;t have to worry about falling pain. It is especially suitable for homes with elderly and children.SPC floor will be very astringent in case of water, that is the sliding friction will increase, and the ground anti-skid performance will be very good.It also has high wear resistance.Even if the floor is rubbed back and forth with a steel wire brush, there will be no scratches, and the service life is more than years.Moreover, SPC floor is very light, with a net weight of only -kg per square meter, which is % of the raw materials of general floor. It can reasonably save the height width ratio of indoor space and reduce the bearing capacity of the floor.The SPC floor does not swell and deform,Delgada BridgeRanking of top ten famous brands of laminate flooring, and does not need to be maintained in the middle and later stages. There is a sound insulation and noise reduction layer at the bottom, and the actual effect of sound insulation and noise reduction is also very good.There are many kinds of floors used in interior decoration. Community owners who have experience in interior decoration should know that different kinds of floors have different home decoration effects. Which kind of floor is better?Let&#;s take a look at the types of solid wood composite flooring.Wear resistant paper invented in the s was used on the surface of bowling alley.Because of the creation, invention and application of anti-static laminate flooring products, European manufacturers use wear-resistant paper to strengthen the production and manufacture of anti-static flooring, and take it as a key component to strengthen anti-static flooring.At present, the domestic rate of wear-resistant paper in China has reached about %, but it still needs to be imported.The key index values for evaluating the quality of wear-resistant layer are:Prepare the floor for hardwood installationEconomic management,Second, soak in water. Beautiful and diverse colors, seamless splicing construction, convenient and fast installation.However, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process, does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body.

Formaldehyde damage.Welcome calls ,Needless to say for a long time, the lacquered cloth market was occupied by low-grade unlined lacquered cloth produced in Taiwan and other overseas countries giving consumers the wrong message that China&#;s quality is not up to standard. In fact, after the inspection of these, the surface wear-resistant layer is only .mm, which is made of poorly processed and Recycled PVC. It does not meet the national standards for plastic coiled materials at all, so its service life is short,In case of large-scale immersion or partial long-term immersion in water accidentally, if there is any leveling stay, such as blanket pattern design, wood floor pattern design, etc.,Delgada BridgeAbout wood flooring,Even be able to complete personalized customization.The wireframe is real, beautiful and generous. Equipped with a variety of accessories and decorative design strips, it can integrate the practical effect of beautiful and generous decorative design.Now we have VSPC flooring, and another layer of processed bamboo is basically attached to SPC, which makes the floor tone milder and feel more comfortable.The surface layer of laminate floor is a wear-resistant layer,Delgada BridgeSPC flooring factory, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, corrosion resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.

Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement, Carefully grind with water gauze until the surface is a little rough, remove the powder and apply a second layer of paint.We hope these techniques will help simplify the plan for installing new floors.If you plan to renovate your house and add new floor elements, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.European and American countries call this kind of floor RVP (rigid vinyl plate), rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, with a thickness of about .mm, transparent texture strong adhesion, wear resistance and scratch resistance, and the wear-resistant coefficient can reach - revolutions.[]El Jadida, Smell Establish the interior decoration style you want: if you expect simplicity and warmth, choose the sexual or shallow floor as much as possible, and if you expect calm air, choose the dark floor.How to buy solid wood composite flooring?

Men&#;s long-term inhalation will cause men&#;s abnormal sperm and death.First, the scope of application is small.Laminate flooring is not recommended. The formaldehyde emission of ℃ flooring is much higher than the conventional standard.If you really want to choose, you might as well look at the holy elephant. Good fire resistanceCustomer first, there will be some hidden dangers if the crack passes through the texture.Well known brands: LG and Hanhua flooring in Korea, Armstrong flooring in the United States, Jiefu and Tejia flooring in France, fulbo flooring in Sweden, tahilong, Dongli flooring in Japan, and domestic bonier flooring.For the pursuit of cost performance,Camarate What’s good for waterproof, choose Korean brands, Japanese brands for the pursuit of quality, European and American brands for the pursuit of brand effect, and domestic brands for low prices.Fifth, strong ground anti-skid.

The wooden floor packaging produced by reliable manufacturers should have the manufacturer&#;s name, detailed address, operation manual and national standards marked in Chinese.Since , the national standard for lifting wood flooring has been gradually implemented, and its name and serial number are the national standard: GB / t- prepreg paper laminated wood flooring.reform,SPC ground anti-skid, and the ground anti-skid shall meet the European standard RBecause of the low thermal conductivity and excellent anti-skid performance of the ground, compared with ordinary floor tiles and marble, SPC floor feels astringent when sticking water and is not easy to roll. Therefore, ground building decoration materials are preferred in public places with high safety regulations, such as toilets, showers, hospitals kindergartens, medical management centers, rehabilitation hospitals, colleges and universities, which are very popular in China in recent years.It is also called prepreg paper laminated wood floor and laminate floor. If it meets the standard, one or more layers of special prepreg thermosetting amino resin shall be used.Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, the national regulations on the flame retardant grade of PVC latch floor meet the B Standard, and the flame retardant raw materials are listed as class a fire safety according to the national standard, such as marble, wall tiles, etc.The technology of Class B flame retardant grade includes mm diameter cotton wool, sprinkled with ethanol, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned, accurately measure the diameter of the burned PVC latch floor impression. If it is less than mm, it is Class B flame retardant grade.Instead of watching it burn.Camarate , Scrape the board with a blade.Only ~ mm thick.First, look at environmental protection

easy care.Before installing the solid wood floor, it must be ensured that the floor is dry, flat and free of garbage.Generally, the installation of the floor must be carried out before other decoration works are completed.If the floor is not flat, the installation will cause some floors and keel to hang, which will make a sound when people step on it.Calvaro,Poor decorative effect: the surface of the laminate floor is a wear-resistant layer and decorative layer, the overall paving effect is distorted and the visual effect is harder.For laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel, seriously endangering human health, so it must not be used for home decoration.Therefore, there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is, the formaldehyde emission is ≤ ? / L. although it basically does not pose a threat to the human body there are still a lot of free formaldehyde left in the floor.The flooring industry has started the second environmental protection revolution and launched E environmental protection standard, which has reduced the formaldehyde emission of the floor to . ? / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, but a bad one has a strong pungent smell!Rio BrancoIn particular, the previous agency said that the laminate floor is a waterproof floor,CalvaroHow much is the floor leather per square meter, which is only the surface layer. In fact, the only taboo in the application of laminate floor is small blisters. Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium, and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color, and the color of furniture can be moderately dark.At the same time,CalvaroHow to clean composite wood floor, for those who pursue value, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.

SPC floor has special anti-skid property. The more it meets water, the more astringent it is. Even if you wear running shoes with nails you won&#;t leave scratches on the floor. Check the hardness of the foundation ground. A week later,CalvaroWhat are the brands of floor leather, the floor sinks, the water turns yellow and black, and the water contains a lot of impurities.Project scope, environmentally friendly materials and diversified colors, making the noise and disturbance lose the sense of existence.Let&#;s take a look at the advantages of SPC floor after class. Soak in waterSome people say this method is unscientific and laminate flooring can&#;t soak in water, but I have done some experiments and come to another conclusion.

Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach about revolutions.According to the thickness of wear-resistant layer, the service life of SPC floor is more than - years.SPC floor is a long-life floor, especially suitable for public places with large flow of people and high degree of wear.install,In order to prevent local fading due to frequent sunlight exposure, it is best to hang curtains to turn direct light into diffuse light, which is conducive to prolonging the service life of the floor. Pay attention to the fact that hard substances such as metal sharps and shoe staples are easy to scratch the surface of the worn lacquer cloth. Avoid cigarette butts, boiled water and hot objects above ℃ from directly contacting the plate surface. Prevent burning marks and scalding marks. Do not press the surface with rubber pads for a long timeIn case of indentation, it is difficult to remove. Although the ground lacquer cloth is flame-retardant and self extinguishing, it will decompose harmful gases at high temperature, which will suffocate if inhaled too much. First, pursue foreign goodsMultilayered Wood FlooringOne of the modern trends in house design is WPC wood flooring.Because of their many qualities, many people like this floor better than others.However, if you will find the quality and durability of SPC flooring, you will also leave people that WPC and SPC flooring have their advantages and disadvantages.If you choose one of them, it&#;s no problem!Now we&#;ll tell you the difference between the two.Calvaro,Waterproof: apply waterproof resin or other waterproof materials at the tongue and groove of the laminate floor, so that the moisture and moisture outside the floor are not easy to invade and the formaldehyde inside is not easy to release, so that the environmental protection and service life of the floor are significantly improved;Especially when laying in a large area, it is inconvenient to leave expansion joints and compression strips, it can prevent floor arching and reduce floor contraction joints.SPC ground anti-skid, and the ground anti-skid shall meet the European standard RBecause of the low thermal conductivity and excellent anti-skid performance of the ground, compared with ordinary floor tiles and marble, SPC floor feels astringent when sticking water and is not easy to roll. Therefore, ground building decoration materials are preferred in public places with high safety regulations, such as toilets, hospitals, kindergartens, medical management centers, rehabilitation hospitals, colleges and universities, which are very popular in China in recent years.Structure: it is made of pure solid wood from inside to outside, which is often made of pine, fir and other softwood.

Third, its quality varies greatly, and its essential quality is not easy to distinguish;Well known brands: LG and Hanhua flooring in Korea, Armstrong flooring in the United States, Jiefu and Tejia flooring in France, fulbo flooring in Sweden, longxilu, tahilong, Dongli flooring in Japan, and domestic bonier flooring.For the pursuit of cost performance, choose Korean brands, Japanese brands for the pursuit of quality, European and American brands for the pursuit of brand effect, and domestic brands for low prices.Larangelo,Although there are millions of wood species, there are not many suitable wood for flooring.According to GB / t national standard for solid wood flooring, the national standard for solid wood flooring in China is coniferous wood with air dry density not less than .g/cm and broad-leaved wood with air dry density not less than .g/cm The main applicable wood species under this standard are oak (oak)(there are different opinions about oak. The store will say the same. On the Internet, some say oak, some say oak, but some say oak), birch, two winged bean, muscarine, round bean, teak, elm, ash (Fraxinus mandshurica), iron sapphire etc. if it exceeds this range, it should be carefully considered, otherwise the quality is not good or the price is unbearable.The floor paint cloth is easy to age under the action of light and heat the floor is hard and the surface color changes, so it is generally paved indoors and on the ground where the sun is not direct. The storage temperature is preferably ℃ ~ ℃. In order to prolong the service life of the floor paint cloth and maintain a long-term beauty, daily maintenance and maintenance are also very important. First, keep the board surface clean and free of sand and dust friction on the board surface; prevent pollutionThe objects shall be removed in time. Pay attention not to scrub with aone, cyclohexanone, concentrated alkaline water and other organic solvents to prevent color fading, degumming, cracking or warping of the surface. They can be wiped with detergent or detergent. They shall be cleaned with semi dry mop on weekdays to prevent dirty water from penetrating into the joint and damaging the bond.Cuajimalpa,Strengthen the floor color rich patterns,LarangeloFloor leather price, fully meet the needs of personalized design, with many varieties and fashionable colors which can simulate various natural or artificial patterns.The decorative layer of laminate floor is generally imitated by computer, or stone to make unique patterns that are not available in nature.Through the investigation, the following conclusions are drawn:From the perspective of environmental protection, the thin one is better than the thick one. Because the thin one uses less glue per unit area. The thick one has less density than the thin one, and the impact resistance is poor,LarangeloHow much is the composite floor? One square meter, but the foot feel is slightly better. In fact, there is little difference between the two. In fact, there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice.

Fifth, strong ground anti-skid. Check the flatness and damage of the self leveling ground.From the perspective of environmental protection, the thin one is better than the thick one. Because the thin one uses less glue per unit area. The thick one has less density than the thin one, and the impact resistance is poor, there is little difference between the two. In fact, there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice.Standard requirements,Prepare the floor for hardwood installationFour look at the brandWell known brands: LG and Hanhua flooring in Korea, Armstrong flooring in the United States, Jiefu and Tejia flooring in France, fulbo flooring in Sweden, longxilu, tahilong, Dongli flooring in Japan, and domestic bonier flooring.For the pursuit of cost performance, choose Korean brands, Japanese brands for the pursuit of quality, European and American brands for the pursuit of brand effect, and domestic brands for low prices.

Establish the interior decoration style you want: if you expect simplicity and warmth, choose the sexual or shallow floor as much as possible, and if you expect calm air, I like to choose soft floor leatherWith calcium carbonate as the key raw material, it is composed of PUR Crystal Shield transparent layer, wear-resistant layer, color film layer, soft sound insulation and elastic layer, etc.Home decoration sales markets all over the world are very popular, which is suitable for home floor decoration.priceLarangelo, The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors. Fire protection: the fire rating of SPC floor is B, second only to stone. It will automatically extinguish after leaving the flame for seconds,LarangeloLaminate and composite wood flooring, flame retardant, non spontaneous combustion, which is less durable than the double-layer floor, has good hand feeling, beautiful and generous, and contains a small amount of indoor formaldehyde.

Produce gene mutation effect.Second, soak in water.Bellas,Solid wood laminate flooring is the same as laminate flooring. As long as it is leveled, it can also improve the floor height. Moreover, because the installation requirements are simple, it also greatly reduces the hidden dangers caused by installation. It has bright colors, clear lines and pleasing colors.At the same time,BellasWood floor grey, for those who pursue value,BellasHow about floor leather, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.Fariskur, Silencing, comfortable and elastic walking feet, not easy to be injured when fallingThe wooden floor packaging produced by reliable manufacturers should have the manufacturer&#;s name,BellasCan floor leather be paved on uneven ground, detailed address, operation manual and national standards marked in Chinese.Since , the national standard for lifting wood flooring has been gradually implemented, specifications and models.When purchasing solid wood multi-layer wood flooring, many customers like to choose wide and long double-layer solid wood flooring. They feel that the really raised flooring looks level and atmospheric at home.In fact, the longer the better the floor, not suitable for long, narrow, not suitable for wide.

In fact of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.If it is really serious or the actual recovery is not satisfactory, we must remove and replace the floor, find technicians to solve it, take out the seriously damaged wooden floor and remove it. Fire protection, fire rating B, second only to stone.how much,Look at the color.The water resistance is reflected by the water absorption thickness expansion index. If the index value is high the water resistance is poor, that is, it is easy to cause size change in humid environment.Must not listen to the misleading such as waterproof floor, only moisture-proof floor, no waterproof wooden floor.Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns, it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, and the flame retardant raw materials are listed as class a fire safety according to the national standard, such as marble, sprinkled with ethanol etc.The technology of Class B flame retardant grade includes mm diameter cotton wool, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned, accurately measure the diameter of the burned PVC latch floor impression. If it is less than mm, it is Class B flame retardant grade.Instead of watching it burn.

Easy to clean: simple, bright as a new mouth, dust-free, very easy to clean.analysis,Two layers of solid wood composite floor. Check the flatness and damage of the self leveling ground. High elasticity and super impact resistance.Pengpai stone plastic floor has soft texture, so it has good elasticity. It has good elasticity recovery under the impact of heavy objects. Its foot feeling is comfortable, which is called 'soft gold of ground materials'.Even if you fall down, it is not easy to get hurt. Installing stone plastic floors at home can protect the elderly and children.Bellas,How to buy solid wood composite flooring?Precautions for solid wood floor installation : do not use the fixing method of wooden wedge and nail.Because SPC floor is composed of wear-resistant layer, mineral rock layer powder and polymer powder, of course, it is not afraid of water. There is no need to worry about the deformation and mildew of home floor due to small blisters.The actual effect of waterproof and mildew removal is very good, so the bathroom, restaurant, kitchen and living balcony can be used.

It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice,KaparikaLaminate ranking, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring: Do not scrape or scratch the floor surface with sharp tools.Kaparika,Secondly, such as whether the floor has cracks, traces of decay, loose knots, whether the floor is bent, etc.However, the color difference of the plate surface has nothing to do with the quality of the floor.Generally speaking, due to the different growth environment, the texture and color of wood are also different.We don&#;t have to be too strict about color difference and texture.This is the natural property of wood.The quality and color of the floor coating surface is also a very important part. The coating film on the surface of the hot solid wood floor is not allowed to be injured or blistered. In terms of the comprehensive performance of the coating surface, it is generally better than the product quality of UVB coating.In family life, maintaining the floor is essential, as if women take time to take care of their skin or keep healthy every day, and the scratches on the floor are like brilliant sadness in youth, so they must have good maintenance habits.Now, solid wood flooring is more and more favored by community owners because of its good upper feet, long service life, simplicity elegance and other advantages.However, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, and wood has been used since to years. However, especially FSC certified plates, have strict restrictions on wood species, so wood base materials are better.Al Hammamat, Look at the surface of the board.From the perspective of environmental protection, the thin one is better than the thick one. Because the thin one uses less glue per unit area. The thick one has less density than the thin one, and the impact resistance is poor, but the foot feel is slightly better. In fact, there is little difference between the two. In fact, there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice.Fourth,KaparikaCan the floor leather stick to the wall, after-sales maintenance service.Generally, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation, so we must choose a professional installation teacher to install it.What kind of floor is good for bedroom design?

Fourth, high ductility and strong impact resistance.The more and more popular American idyllic floor is dirt resistant and durable. The furniture has a full sense of high grade. The rustic flavor brought by the simple texture and tone can not be copied.This floor is suitable for creating a simple and natural pastoral style. It is very classical, which can make the whole style more fashionable and full of personality.Defects: some indoor formaldehyde is restrained, the quality of the sales market is uneven, and most plates are shoddy.Word of mouth recommendation,The raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different; Pay attention to the size. Deformation level.

Fourth wear resistance means that it is not easy to scratch with artifact.Installation works,The application and marketing promotion of PVC latch floor in China has a history of ten years. From the early stage, it has entered institutions and institutions such as colleges and universities, hospitals and outpatient departments in China, mainly LVT latch floor (thin thickness, the key is mm) and WPC latch floor (ordinary thin thickness: mm, mm). SPC floor is a new product in recent five years. Most LVT / WPC are made of steam pressure,KaparikaHow much is Dayou laminate floor,Customized delivery time up to days.However, SPC floor can be formed by integrated extrusion process, and the delivery time can be shortened several times.If the scratch is shallow and the paint layer on the surface of the solid wood floor is not damaged, it can be polished with polishing paste immediately after the floor is cleaned.Because the polishing paste is mainly to maintain the luster of the floor and make the surface of the solid wood floor more and more smooth,The flame retardant grade is B and the scratch can also be repaired. All standard SPC floors must be certified by IS international quality management system and ISO international green environmental protection product certification.Kaparika, and the indoor formaldehyde is higher than the national standard. Common floor types: Select machining accuracy

The double composite solid wood floor adopts double-layer solid wood pressing. It feels like pure natural wood. The installation and maintenance is very simple. It is suitable for floor heating, beautiful and generous good reliability, and contains a small amount of indoor formaldehyde.Wear resistance: generally, it is about ~ times that of coated wood floor.Valongo,The structure of solid wood multilayer composite floor is divided into solid wood control panel,ValongoSling tunnel waterproof board, multilayer board and mixed glue.Because less glue is used and the materials are natural, the formaldehyde released will be less than that of reinforced composite floor.Small blisters cannot be repaired after they are destroyed.Yalta, In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'.stability Veneer method: stick the wood veneer on the board surface.For example, the high price solid wood veneer is pasted on the low price solid wood floor. Although this is also the solid wood floor, it deceives consumers.

Laminate floor is composed of wear-resistant layer, decorative layer, base material and balance layer.The wear-resistant layer, decorative layer and balance layer are manually printed. The base material is made of fast-growing forest materials, which is lower than that of solid wood floor. At the same time, it can be produced on a large scale and has high cost performance.According to different substrates the price difference is obvious, and customers have more room to choose, which is suitable for people of all levels.The price of solid wood flooring continues to rise, which has produced a large sales market for reinforced flooring.The application of reinforced floor in home decoration can save a lot of cost budget.Small blisters cannot be repaired after they are destroyed.How much is it, Soak in waterPVC flooring has certain bacteriostatic properties. Some excellent PVC flooring are added with bacteriostatic agents in the production process, which has a strong ability to remove most bacteria and inhibit bacterial reproduction.Therefore, the natural environment with high requirements for disinfection and sterilization, such as PVC floor in hospital consulting room, is the most ideal choice.The surface color of solid wood composite floor shall be determined according to the decoration area, furniture color and overall decoration design style of the customer&#;s home. First, the dark brown floor looks simple for rooms with large area or sufficient light, and the light color floor looks spacious and bright for rooms with small area;Second, rooms with large area or sufficient light look bright with floors of different colors;Third, choose different colors of floors according to different decoration design sites. For example, the light color mild floor in the large living room can create a bright atmosphere, and the warm tone floor in the bedroom;Third, the color of furniture can be mixed with medium color floor, and the color of furniture can be mixed with warm tone floor.

Service is not only related to the guarantee of product quality, warping and cracking of floor products appear soon after installation, many of which are caused by improper installation.Therefore, in floor installation engineering, sawdust and dust will inevitably appear and float in the air, when they get up every morning they feel suffocated, nausea, and even dizzy;Easy to catch a cold;I often feel uncomfortable in my throat, poor breathing, dizziness and fatigue after a long time.This is because the respiratory tract is infected, and the biggest inducement is the invasion of dust suspended in the air for a long time.In order to avoid dust pollution, it is best to choose dust-free installation.Pursuit of excellence,ValongoHow much is a square meter of solid wood multi-storey floor,quality Select the number of wear-resistant revolutions. Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium, and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color, and the color of furniture can be moderately dark.Valongo, SPC floor surface will not have holes and water seepage;There will be no seams after splicing. After being stained, wipe it gently with a rag to clean it easily, leaving no marks that are difficult to remove and there is no need to maintain it with special maintenance products.The color is gorgeous, the texture is clear, and the pattern gives people a beautiful feeling.It not only has axial drilling texture, but also has irregular thick and light parallel lines for wood texture, with clear and smooth texture and a sense of hierarchy;There are also rotary drilling textures. The wood texture also has mountain or wavy lines. The texture is beautiful, fluctuating and cool.In addition to the high wear-resistant solid wood floor, the electronic organ architectural coating floor is also the main product in the recent popular sales market.Beautiful and bright appearance, with super thick wear-resistant layer,ValongoAsh wood floor, the actual effect is brighter and deeper, and the upper foot is stronger. The appearance is very similar to the solid wood floor, but the price is far less than the solid wood floor.The solid wood composite floor is overlapped and laminated by the boards of different greening plants, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small, the specification stability is good

Fifth, the total thickness of the floor is about cm, which is also related to his total price. Ultra light and ultra-thinSintra, use mild neutral detergent and wash with warm water in time to avoid the corrosion of alkaline water and soapy water on the ground,SintraHow much is the price of waterproof board, and do not wipe the ground with gasoline or other high-temperature liquids. High cost performanceKatamaka, new solid wood composite board.Solid wood composite floor gives consideration to strengthening the stability of the floor and the beautiful and generous solid wood floor double-layer solid wood composite floor, which has the advantage of environmental protection.Is the home floor paved with solid wood or structurally reinforced floor?

Precautions for solid wood floor installation : solid wood floor cannot be used immediately after disassembly and packaging. Clean the paint, grease, etc. on the ground.The surface layer of laminate floor is a wear-resistant layer, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, corrosion resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.assets, Select the number of wear-resistant revolutionsEighth, antimicrobial activity.thickness

The quality of laminate flooring can also be distinguished by some methods:Customer first,Third,SintraHow to choose laminate flooring, look. The main raw material of SPC floor is polyvinyl chloride, which is an environmentally friendly renewable resource.It has been widely used in people&#;s daily life, such as tableware and medical infusion bags,SintraWhat kind of floor leather to buy, so there is no need to worry about its environmental protection.SPC floor is mainly composed of natural stone powder and does not contain any radioactive elements.It is a new type of green environmental protection floor decoration material. Light and thin.The thickness of SPC floor is mm- mm, and the weight per square meter is only about - kg, less than % of ordinary floor materials.In high-rise buildings, it has strong advantages in load-bearing and space saving.At the same time, it has special advantages in secondary decoration and transformation.Three layer solid wood composite floor.Sintra,Four look at the brand The key raw materials of SPC floor are PVC and lime powder. PVC is a non-toxic renewable energy for environmental protection at room temperature. Lime powder is natural stone indoor formaldehyde, which is more environmentally friendly.stability

Laminate flooring is a product with high scientific and technological content. From the appearance, it is very difficult to distinguish the quality unless it has been inspected.Therefore, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, in the future, the service is guaranteed. If you buy it at ease, you can also avoid worries at home.Maybe the cheap floor can be or yuan cheaper than the brand floor per square meter, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee.Don&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness,Advantages of reinforced composite wood floor.Men&#;s long-term inhalation will cause men&#;s abnormal sperm and death.First, the scope of application is small.Naxxar,SPC floor has a variety of colors, such as blanket pattern design,repairComposite floor keel, stone pattern design wood floor pattern design, etc.,Even be able to complete personalized customization.The wireframe is real,repairHow about laminate flooring, beautiful and generous. Equipped with a variety of accessories and decorative design strips, it can integrate the practical effect of beautiful and generous decorative design.Now we have VSPC flooring, and another layer of processed bamboo is basically attached to SPC which makes the floor tone milder and feel more comfortable.Precautions for solid wood floor installation : avoid the inconsistency between the length direction of the floor and the entrance direction.Eighth, for those who pursue value, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.The relative density of laminate floor board (plywood with high density) should be .-.g/cm, which is not suitable for too low or too high.Laminate flooring is a product with high scientific and technological content. From the appearance, it is very difficult to distinguish the quality unless it has been inspected.Therefore, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, in the future, the service is guaranteed. If you buy it at ease, you can also avoid worries at home.Maybe the cheap floor can be or yuan cheaper than the brand floor per square meter, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee.Promise and keep promise,SPC ground anti-skid, and the ground anti-skid shall meet the European standard RBecause of the low thermal conductivity and excellent anti-skid performance of the ground, compared with ordinary floor tiles and marble SPC floor feels astringent when sticking water and is not easy to roll. Therefore, such as toilets, showers, hospitals, kindergartens, medical management centers,repairFloor brand, rehabilitation hospitals, colleges and universities which are very popular in China in recent years. Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach about revolutions.According to the thickness of wear-resistant layer, the service life of SPC floor is more than - years.SPC floor is a long-life floor, especially suitable for public places with large flow of people and high degree of wear. Wear resistance level.

Lacquer cloth green ( piece)Trustworthy, Domestic cheap decorative paper is usually used. The pattern of this decorative paper is fuzzy. The biggest defect is that it is generally not UV resistant and will fade after sunlight.This is why some consumers reflect the discoloration of the places near the balcony and windows three or four months after the floor is installed. The base material is poor, medium and low density board or particleboard is used, the quality index is unstable, and the formaldehyde seriously exceeds the standard. The ground shall be polished and leveled, and all pollutants shall be cleaned without gypsum. In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'.repair,People who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), environmental protection. The real formaldehyde is quickly distinguished from many wood flooring materials, and is more and more loved and used by owners.However, it does not refer to formaldehyde, but refers to that the formaldehyde emission is less than .mg/l, and the harm is small.At the level of home decoration effect, which is messy. The stains at the interface can not be solved, the bacteria are very easy to breed, and the large floor is popular in the sales market.Ninth, laser cutting is simple and easy.

Domestic cheap decorative paper is usually used. The pattern of this decorative paper is fuzzy. The biggest defect is that it is generally not UV resistant and will fade after sunlight.This is why some consumers reflect the discoloration of the places near the balcony and windows three or four months after the floor is installed. The base material is poor, the quality index is unstable, and the formaldehyde seriously exceeds the standard. Products of well-known brand manufacturers with business history are preferredKanidro,Considering the Japanese style of the family, plus the all-round shops in the living room and restaurant, the color needs to be light color, light yellow, moderate stability, and the preliminary positioning of white oak. The reinforced composite wood floor has the texture of natural wood floor at the same time,KanidroCan floor heating be installed with wooden floor, and the price is reasonable, which is favored by the majority of consumers. However, many consumers are worried that formaldehyde will be stored in the production and processing process of composite floorIn, it is harmful to human body. How about using reinforced composite wood flooring? What are the advantages and disadvantages of reinforced composite wood flooring? Let&#;s take you to know about the relevant situation of reinforced composite wood flooring and have a look together.The standard ones are generally -mm wide, about and long. The wide ones are mostly more than mm long and about mm wide. The narrow ones are - mm long and about mm wide. They are similar to the specifications of solid wood flooring, and most of them are called imitation solid wood flooring.Kutnahola, Moisture proof, no deformation in case of water, and can be used in kitchen, toilet basement, etc： I can smell faint wood fragrance. This floor shows that the glue content is very low.Up to European standard E level. Never soak the floor with water during use. If there is an accident,KanidroSPC floor wholesale, mop the floor with a dry mop in time.

In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.If the scratch is serious and the floor paint is damaged and white, some countermeasures need to be taken.If there are cracks inside the wooden floor, it must be replaced.As a result, the internal cracks will lead to the depression of the wood floor, which has a great impact on the normal use.management, Non toxic and tasteless not afraid of water, fire and tide;In terms of scratch resistance, resource use and anti-skid performance, look at the priceScheme customization and can also improve the building height.

Finally, After the floor has just been laid, always keep the indoor air circulating. Check the flatness and damage of the self leveling ground.The floor paint cloth is easy to age under the action of light and heat, the floor is hard and the surface color changes so it is generally paved indoors and on the ground where the sun is not direct. The storage temperature is preferably ℃ ~ ℃. In order to prolong the service life of the floor paint cloth and maintain a long-term beauty, daily maintenance and maintenance are also very important. First, keep the board surface clean and free of sand and dust friction on the board surface; prevent pollutionThe objects shall be removed in time. Pay attention not to scrub with aone, cyclohexanone, concentrated alkaline water and other organic solvents to prevent color fading, degumming, cracking or warping of the surface. They can be wiped with detergent or detergent. They shall be cleaned with semi dry mop on weekdays to prevent dirty water from penetrating into the joint and damaging the bond.Kanidro, Wear resistance, wear resistance grade t.Keep in mind the old adage that cheap goods are not good goods. Products sold at very low prices often have problems. There is an unfathomable trap behind cheap goods.In the face of fierce market competition, everyone wants to attract consumers, but regular manufacturers who pay attention to quality can&#;t make a jump price. Generally, wear-resistant paper with aluminum oxide content of about g / m is used, and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan, Hubei,KanidroComposite laminate floor, Shandong, Liaoning, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.

When assembling the solid wood floor, do not be too loose or too tight.The assembly relaxation shall be reasonably arranged according to the temperature of the indoor environment. The assembly relaxation will produce a large gap with the shrinkage of the floor.The assembly is too tight and the floor is arched when it expands.In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, Brush the finish paint three to four times according to the above procedure, and the last time does not need polishing.Lacquer cloth green ( piece)Caguas,Solid wood floor is very beneficial to physical and mental health,KatadareniaWood floor grinding, environmental protection and excellent home decoration effect.The price is quite expensive. Installation and maintenance must be done carefully, and waxing should be done according to time.The price of ordinary solid wood flooring ranges from yuan / m to yuan / m,KatadareniaHow to buy floor leather, and some expensive ones even dare to reach yuan / mHow many years can solid wood flooring be used?From the perspective of the general service life of the floor whether it is solid wood floor, reinforced composite floor or multi-layer composite floor, if it is used at home, it can generally be used for - years depending on the use environment. SPC floor is considered as a new generation of floor materials, which is characterized by extremely stable, high performance, complete waterproof, high-density sales core and pressure mark;It can be easily installed on different types of ground bases, concrete, ceramics or existing floors.Before putting down the new floor, new wallpaper or regular maintenance, completing these projects in advance will help protect your beautiful new floor from damage.

Lacquer cloth green ( piece)Ash wood (Fraxinus mandshurica): it has good stability and natural grain, but it grows in a dry environment and is easy to deform in the late stage of tide. It is more suitable in the north than in the south.Two layers of solid wood composite floor.Range, Products of well-known brand manufacturers with business history are preferred Establish the interior decoration style you want: if you expect simplicity and warmth, choose the sexual or shallow floor as much as possible, and if you expect calm air, choose the dark floor. Considering from the elements of economic development: strengthening is better than solid wood.If you buy solid wood, the quoted price is generally the price of bare board, plus the price of installation and spare parts. In terms of comfort, strengthening and solid wood are better than ceramic tiles, because they are warm for many days and cool in summer.

Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight elasticity, good mechanical strength, good foot feeling strength comfortable foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation sound insulation, moisture resistance, small water absorption, good insulation self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover, you can choose low-grade products, because low-grade productsThe price is low and there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface, it is the first-class product and the first-class product. If there is a slight missing print or lack of film,KatadareniaHow about laminate floor cleaning, it is the qualified product, otherwise it is the unqualified product. Finally, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the wear-resistant layer is thick, and then observe whether there are cracks, fractures, wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing, lack of film and overprint deviationDefects such as color difference, color difference and pollution.Good reputation,SPC floor is mainly made of calcium carbonate, including pur Crystal Shield transparent layer, wear-resistant layer color film layer, SPC polymer rural base and soft sound insulation rebound layer.Its foreign home decoration sales market is very hot, especially suitable for home furniture floor.Third, it cannot be repaired. Generally, wear-resistant paper with aluminum oxide content of about g / m is used, or wear-resistant paper is not used.Low density board (medium density board is rarely used), and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan, Shandong, Liaoning, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, not environmental protection, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.Katadarenia, Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, etc.There is nothing in the world that is not hot, and so is the floor.No matter whether the SPC floor has shrinkage joints or not, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, room size, winter and summer temperature, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market, followed by the rise in the price of solid wood flooring in , the decline in total consumption output, and more fierce market competition. In particular, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore China&#;s solid wood flooring field should re plan the overall goal of development prospects, actively build a strong brand and promote the physical and mental health development trend of solid wood flooring.Some people say this method is unscientific and laminate flooring can&#;t soak in water adjust the development strategic concept, but I have done some experiments and come to another conclusion.

At the level of home decoration effect there are many joints on the paved small floor,Kant VillageIntroduction to laminate flooring, which is messy. The stains at the interface can not be solved, the bacteria are very easy to breed, and the large floor is popular in the sales market.Solid wood composite floor and reinforced composite floor are paved by dealers at this stage.Kant VillageThe more and more popular American idyllic floor is dirt resistant and durable. The furniture has a full sense of high grade. The rustic flavor brought by the simple texture and tone can not be copied.This floor is suitable for creating a simple and natural pastoral style. It is very classical, which can make the whole style more fashionable and full of personality.At the level of home decoration effect,Kant VillageWhich is better, wooden floor or ceramic tile, there are many joints on the paved small floor, which is messy. The stains at the interface can not be solved, the bacteria are very easy to breed, and the large floor is popular in the sales market.Pangkal Pinang,After - floors are assembled on the flat ground, observe whether the processing accuracy is flat and smooth whether the tenon and groove bite is appropriate, carefully check the assembly height difference and gap between floors.Four look at the brand Defects.

The maintenance of SPC floor is very convenient. If the floor is dirty, you can wipe it with a mop.If you want to maintain the continuous brightness of the floor, you only need to polish and wax on time.Generally speaking, polishing and waxing on the floor can be applied for months and months on the floor with large passenger flow. Its maintenance frequency is much less than that of other floors.In the decoration of new houses, some roads in the home are fully covered with wooden floors, but over time, the wooden floors are very easy to deform, curl edges and are not waterproof. Now such raw materials are particularly popular abroad. The real indoor formaldehyde is not deformed. No wonder it is popular ~.The formaldehyde emission of pure solid wood floor is very small. If the budget is sufficient, it is recommended to use pure solid wood floor.Narrow board specifications are also China&#;s characteristics. Solid wood flooring looks generous, too expensive and has poor stability; China&#;s flooring manufacturers make imitation solid wood flooring. Looking at its specifications as solid wood flooring, it is cheap and stable. The four sides are made into V-grooves, and the thickness is basically about mm. It has been implemented in the market for less than a year and is very popular.High quality brand,The quality of solid wood composite floor is stable, not easy to damage and easy to use.SPC floor has a variety of colors, such as blanket pattern design, stone pattern design, wood floor pattern design, etc.,Even be able to complete personalized customization.The wireframe is real, beautiful and generous. Equipped with a variety of accessories and decorative design strips, and another layer of processed bamboo is basically attached to SPC, which makes the floor tone milder and feel more comfortable.Mute, that is, add cork cushion or other cushion similar to cork on the back of the floor.After using the cork floor mat, the noise of stepping on the floor can be reduced by more than dB (quoted from the data of the cork floor mat factory), which can increase the foot feeling, sound absorption and sound insulation.This plays a positive role in improving the comfort of laminate flooring.It is also a direction for the future development of laminate flooring.

Lacquer cloth green ( piece)Quality risk,The wide board specification was invented by China&#;s laminate flooring processing enterprises in order to meet consumer demand. Its advantages look generous, and there are relatively few gaps in the floor. Most of them are thickened, that is, about mm. Generally, the decorative paper on the surface is made in China, with many changes in design and color, which is more flexible. The disadvantage is that the color difference is relatively large, which is composed of evenly distributed alumina, which can achieve high hardness. Scraping with a hard object as sharp as a key can only leave shallow traces.The pollution resistance, corrosion resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.Kant Village, About solid wood composite floor.Foot feelTherefore, with solid wood texture, latch structure and paint finish, the service life of solid wood floor can reach decades. There is no problem at all, and it can even be passed down from generation to generation. During application, pay attention to prevent the floor from being scratched by hard blocks such as excessive heavy metal needles, laminated glass tiles and shoe nails;When moving furniture, do not move back and forth on the floor;Do not touch the floor with fire or immediately place an amplified power electric water heater on the floor;Do not place strong alkali and strong acid chemicals on the floor;It must not be immersed in water for a long time.

However, from the perspective of installation method, laminate floor, multi-layer floor and ordinary flat buckle solid wood floor belong to disposable floor, because they must be fixed with nails or glue and cannot be reused.With the unique tiger Tenon Technology of Tiange floor, it can realize glue free,AGUS SantaGeomembrane waterproof board, nail free and dragon free during installation, so that the floor can be disassembled, installed and used repeatedly.For example, the floor can be quickly removed and reinstalled.If you live for many years and want to move away, this is very important because the logs are more and more precious, Exposure to obvious sunlight, or significant increase or decrease in room temperature, will cause early embrittlement of solid wood board floor paint, which should be minimized.The road surface is warm for commercial use. Can we use solid wood floor to make the road surface?Solid wood floor is very beneficial to physical and mental health, environmental protection and excellent home decoration effect.The price is quite expensive. Installation and maintenance must be done carefully, and waxing should be done according to time.The price of ordinary solid wood flooring ranges from yuan / m to yuan / m, and some expensive ones even dare to reach yuan / mHow many years can solid wood flooring be used?From the perspective of the general service life of the floor, whether it is solid wood floor, reinforced composite floor or multi-layer composite floor, if it is used at home, it can generally be used for - years depending on the use environment.

XIII. Convenient maintenance.investment,Molded plate: a remarkable feature of molded plate is that there is an arc depression on the upper edge of the plate. After the two plates are assembled, they are closely combined, but there is a small groove, which is called U-shaped groove in the industry. In most cases, this kind of plate is reinforced floor.One of the great advantages of the molded plate is that it is easy to clean. It is very convenient to clean the dust in the small ditch, as long as you wipe it with a rag or mop. Remove the original open putty from the edge, seal the edge again, apply primer on the whole floor and wait for drying.The surface layer of the laminate floor is a wear-resistant layer, which is composed of evenly distributed alumina which can achieve high hardness. Scraping with a hard object as sharp as a key can only leave shallow traces.The pollution resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.AGUS Santa corrosion resistance, Smell: whether the product has a chemical smell that irritates people. The big smell is likely to be that the limit of harmful substances exceeds the standard or the printing layer on the surface of floor leather releases toxic gas.The fire rating reaches B, which is unmatched by ordinary floors.Therefore, many public spaces are also paved with SPC floors, that is to say, this reason.Foot feel

Wear resistance, wear resistance grade t.thicknessGondoma,Because of its special structure, solid wood composite floor has low requirements for wood and can make full use of materials, so its price is much cheaper than solid wood composite floor.Defects: poor wear resistance, no fire prevention, no corrosion resistance, very easy to regain moisture, deformation, thermal deformation,GondomaWood floor cushion, folding, etc., and must be polished and waxed on time, which is difficult for medical treatment.Manik Hari,In order to reduce the cost, SPC latch floor with extremely poor quality and low price is adopted, which has poor stability and large thermal expansion and cold contraction.The loss is caused by the 'general paving method'. Environmental protection level. It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring:

Second, so it is actually a new type of solid wood floor.Because it has the advantages of pure natural wood feeling, convenient installation and maintenance, anti-corrosion and waterproof, bacteriostasis and applicable electric heating, it has become a key fashionable floor type in European countries and has been gradually accepted by the people in China.Manufacturers generally consist of four layers of raw materials, namely wear-resistant layer decorative layer, dense plate layer and equilibrium layer. Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement, etc.A complete range of products,The current woodworking is basically done by woodworkers. The 'general woodworking' method is adopted,GondomaGrade of solid wood composite floor, and the shrinkage joint size is not calculated according to the thermal expansion and cold contraction parameters provided by SPC flooring factory.If the room is slightly larger, but the reserved gap is too small, especially when the temperature difference between winter and summer is too large, it is very easy to have no gap to expand, resulting in arching and warping.Eleventh, the classification is diverse;Maintenance method editing voice

Secondly, choose the color you want.Installation requirements,GondomaWhat are SPC flooring manufacturers, Free formaldehyde emissionDifferent colored floors can create different styles of popular furniture high-grade, calm, classical and unique furniture charm.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, to create such high-quality and textured home decoration, we must not damage the floor.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Excellent SPC floor has strong wear resistance, depiction resistance, pollution resistance and compression resistance. It is widely used in hospitals, colleges, office buildings, shops, chain hotels, exhibitions, public libraries stadiums, subway stations and other public places.Gondoma,Precautions for solid wood floor installation : avoid the inconsistency between the length direction of the floor and the entrance direction. SPC floor has special anti-skid property. The more it meets water, choose the color you want.

Stability: completely disperse the original wood mechanism,MatosinosHow about laminate flooring, destroy the characteristics of various wet expansion and contraction, and the specification is very stable, especially for rooms with heating system.Select well-known brands;Matosinos, Check the hardness of the foundation ground.Strengthen the floor color, rich patterns, fully meet the needs of personalized design, with many varieties and fashionable colors, which can simulate various natural or artificial patterns.The decorative layer of laminate floor is generally imitated by computer, which can imitate wood patterns of various materials, or stone to make unique patterns that are not available in nature.Shaffield, There are standard wide plate and narrow plate in terms of specificationsThe raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different;Laminate flooring is a product with high scientific and technological content. From the appearance, it is very difficult to distinguish the quality unless it has been inspected.Therefore, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, the service is guaranteed. If you buy it at ease, you can also avoid worries at home.Maybe the cheap floor can be or yuan cheaper than the brand floor per square meter, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee.

Structure: it is made of pure solid wood from inside to outside, which is often made of pine, details are demons.Take the product leaflet page, which is the most used promotional material by agents, as an example, from copywriting, design, printing, paper to regional market consultation telephone and distribution address.If there are irregularities and inconsistencies, making it visually comfortable and healthy.The surface color of solid wood composite floor shall be determined according to the decoration area, furniture color and overall decoration design style of the customer&#;s home. First, the dark brown floor looks simple for rooms with large area or sufficient light, rooms with large area or sufficient light look bright with floors of different colors;Third, choose different colors of floors according to different decoration design sites. For example, the light color mild floor in the large living room can create a bright atmosphere, and the warm tone floor in the bedroom;Third, the color of furniture can be mixed with medium color floor, and the color of furniture can be mixed with warm tone floor.Quality management, Wear resistance level.The second: I can&#;t tell the taste. The domestic price of this floor is more than yuan;The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving,MatosinosHow about laminate floor cleaning, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile,MatosinosHow is the first floor damp proof, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.

Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color, and the color of furniture can be moderately dark.Sincere service, Stimulating effect.Different colored floors can create different styles of popular furniture, high-grade, calm, classical and unique furniture charm.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.People who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), environmental protection. The real formaldehyde is quickly distinguished from many wood flooring materials and is more and more loved and used by owners.However, but refers to that the formaldehyde emission is less than .mg/l it does not refer to formaldehyde, and the harm is small.Matosinos, Pay attention to the size. Green environmental protection Dirt elimination method: special decontamination oil can be used to wipe oil stains, paint and printing ink;If there are blood stains, fruit juice, red wine, wine and other dirt, you can wipe it with a wet towel or a towel dipped in an appropriate floor cleaning solution, and you can&#;t eliminate the wood floor with strong alkali caustic soda solution.Identify from the packaging.

Produce gene mutation effect.Fourth, The composite floor has stable quality and is not easy to be damaged.Well known brands: LG and Hanhua flooring in Korea, Jiefu and Tejia flooring in France, fulbo flooring in Sweden, longxilu, tahilong, Dongli flooring in Japan,Sequeira Common wood floor,Sequeira How much is the price of laminate flooring? One square meter, and domestic bonier flooring.For the pursuit of cost performance, choose Korean brands, Japanese brands for the pursuit of quality, European and American brands for the pursuit of brand effect, and domestic brands for low prices.French Polynesia, About strengthening the floor.Stability: completely disperse the original wood mechanism, destroy the characteristics of various wet expansion and contraction, and the specification is very stable, especially for rooms with heating system. Remove the pavement and remove dust to avoid the accumulation of crushed stones or friction coefficient floating dust on the floor surface.The shoe sole can be placed at the door to prevent broken stones or friction coefficient dust from being brought into the room.Generally, when cleaning the floor, you can wipe the road surface with cotton strips.Do not wipe the floor with wet mop or corrosive liquid (such as soap liquid and vehicle gasoline). In order to better improve the indoor air quality humidity, humidification equipment can be selected in autumn and winter to maintain the indoor air quality humidity at % - %.When moving furniture, you can&#;t push and pull the door on the ground immediately. You should stretch out and remove it with care.The bottom of furniture that moves frequently should be pasted with an eraser.

You can take some steps to ensure a smooth and seamless installation: remove the base plate and door frame before starting.This will make it easier for your installation team to get the perfect fit.No matter what kind of floor you are currently using, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself. Painting.The meaning of brand is by no means limited to the popularity of the enterprise.A mature and successful brand does not have strength and popularity, but forms a strong psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers. It is bred in the eyes of consumers by many factors, such as the accumulation of time, the practical action of enterprises, the continuous improvement of products and services and so on.Enterprise brand is a commitment and an attitude of an enterprise, which is a guarantee for consumers.Therefore, when consumers choose products, they&#;d better choose big brands to get better guarantee of quality, service and so on.Where can I find it?, Anti slip, more astringent in case of water, not easy to fallWhen asked about the service life and wear resistance of SPC floor in the message area of the message board, they are classified as non wear resistance.In fact, the national wear resistance test of PVC latch floor is not simply to scratch on the surface with artifact, but to grind and polish the floor with thick bottom circular stone roller under the condition of kg charging. After how many revolutions of rotation and polishing, the wear-resistant layer on the floor surface is damaged and exposed to the speed of rural grass-roots.The rotational speed of this connection point is an index value considering the wear resistance of PVC latch floor.For example, the minimum speed of national composite floor is rpm.Therefore,Sequeira Wood floor renovation price, the wear resistance of PVC latch floor is professionally measured by the national testing center.Common cost methods for solid wood flooring are as follows:

Structure: it is made of pure solid wood from inside to outside, which is often made of pine, fir and other softwood.consumption,In addition, pay attention to whether there are sawdust and stratification on the cutting surface of the plate and whether there are sawdust and stratification on the cutting surface of the solid wood floor.The wear-resistant layer on the surface of laminate floor has experienced unique solutions, high strength, no trace in daily application, and beautiful and generous.The cross section of the floor is rubbed with a file, so that the heat generated in the cross section is the full volatilization of formaldehyde (formaldehyde will accelerate the release above ℃, and some irritating smell can be smelled). At this time, you can smell three different levels of smell:Sequeira ,Solid wood composite floor and reinforced composite floor are paved by dealers at this stage.Advantages: of course, the grain is comfortable, wear-resistant, moisture-resistant flame retardant, and the maintenance is better than that of solid wood.Suitable soil temperature, can also be paved in the kitchen. SPC floor surface will not have holes and water seepage;There will be no seams after splicing. After being stained wipe it gently with a rag to clean it easily, leaving no marks that are difficult to remove, and there is no need to maintain it with special maintenance products.

After the floor has just been laid, always keep the indoor air circulating.In order to prevent local fading due to frequent sunlight exposure, it is best to hang curtains to turn direct light into diffuse light, which is conducive to prolonging the service life of the floor. Pay attention to the fact that hard substances such as metal sharps and shoe staples are easy to scratch the surface of the worn lacquer cloth. Avoid cigarette butts, boiled water and hot objects above ℃ from directly contacting the plate surface. Prevent burning marks and scalding marks. Do not press the surface with rubber pads for a long time,In case of indentation, it is difficult to remove. Although the ground lacquer cloth is flame-retardant and self extinguishing, it will decompose harmful gases at high temperature, which will suffocate if inhaled too much. First, pursue foreign goodsSan eliapovo, The relative density of plate is adopted.The color is gorgeous, the texture is clear, and the pattern gives people a beautiful feeling.It not only has axial drilling texture, but also has irregular thick and light parallel lines for wood texture, with clear and smooth texture and a sense of hierarchy;There are also rotary drilling textures. The wood texture also has mountain or wavy lines. The texture is beautiful, fluctuating and cool.Fasa,The raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different;Excellent SPC floor has strong wear resistance, depiction resistance, pollution resistance and compression resistance. It is widely used in hospitals, colleges, office buildings, processing plants, shops, chain hotels, exhibitions, public libraries, stadiums, subway stations and other public places.The key injury of formaldehyde is mainly manifested in the stimulation of skin and mucous membrane. Formaldehyde is a toxic chemical substance, which can fuse with protein. When inhaled at high concentration, it has serious irritation and edema of respiratory system, eye irritation and headache.

Excellent SPC floor has strong wear resistance, depiction resistance, pollution resistance and compression resistance. It is widely used in hospitals, colleges, office buildings, processing plants, shops, chain hotels, stadiums, subway stations and other public places.The performance of domestic solid wood composite floor is better than that of imported solid wood composite floor, whether it is three-layer solid wood composite or multi-layer solid wood composite floor.If the budget is insufficient or the floor heating needs to be installed at home, and the budget is sufficient). Don&#;t be too obsessed with imported big brands, and domestic big brands may not be as good as domestic ones.SPC and WPC (waterproof core) vinyl wood flooring can be installed in any room or space.There is no need to worry about temperature fluctuations or moisture exposure.Both floors maintain maximum stability.They can resist all kinds of weather conditions.The performance levels of both floors are excellent.Where can I find it?,The density of laminate floor substrate (high density fiberboard) shall be .-. g / cm, and it is not appropriate to have too low or too high density.The maintenance of SPC floor is very convenient. If the floor is dirty, you can wipe it with a mop.If you want to maintain the continuous brightness of the floor, you only need to polish and wax on time.Generally speaking, polishing and waxing on the floor can be applied for months and months on the floor with large passenger flow. Its maintenance frequency is much less than that of other floors.In the decoration of new houses, some roads in the home are fully covered with wooden floors, but over time,San eliapovoReinforced wooden door, the wooden floors are very easy to deform, curl edges and are not waterproof. Now such raw materials are particularly popular abroad. The real indoor formaldehyde is not deformed. No wonder it is popular ~.It is roughly divided into common solid wood flooring, reinforced composite wood flooring solid wood composite flooring, bamboo flooring, high corrosion-resistant flooring, plastic flooring, antistatic flooring and outdoor stalls according to raw materials.According to the level of ecological environment protection, it is divided into European standard E and E floor, Japanese standard - F star floor regulated by JAS star, etc.E which is often referred to by Chinese manufacturers, is the name of Chinese specifications, but there is no name of E in European standards.

Fifth, smell with your nose is not protected by the environment.Total quality assurance,Generally, the plate has a certain degree of expansion, so some gaps (.mm is appropriate) should be left between the laths during splicing to avoid arching.If the floor of the room is uneven, it can be paved with wooden keel for leveling, and then nailed with lath on it. After planing, paint and wax can make the room elegant, extraordinary, clean and warm.A short wooden floor strip has been launched in the market, which can be combined freely according to the size of the room,San eliapovoHow to deal with the edge of floor leather, and can be assembled into a variety of patterns at will.This kind of short plank is more practical, but the disadvantage is that the cost is not low.If the floor is made of wood, it shall be fixed for minutes first×mm vertical wood wall reinforcement so that the overall structure of the room tends to be unified.Wall panels can be used as whole wall paneling or only as dado paneling.Wood wallboard is the best for large wallboard concrete wall. It can directly fix the board to the wall with adhesive.If the white ash interior wall of brickwork structure is decorated with wallboard, and then fix the plate to the wood wall reinforcement with wood screws.Family decorative wallboard is best based on plywood, and its strength is appropriate.Then stick wood veneer on its surface to make up for the deficiency of plywood pattern.After the veneer is pasted, apply one or two layers of matte paint, and the pattern of the wallboard will be clear and beautiful, smooth and three-dimensional.Wood floor and wood wallboard interweave making the style of the whole room unified, both simple and elegant.On the basis of uniform color or reasonable interweaving, it can make the whole room comfortable and soft, and give people an indescribable sense of mystery.Introduction of floor leatherService is not only related to the guarantee of product quality,San eliapovoWaterproof composite solid wood floor, but also the embodiment of corporate image.There will be some deformation, warpage and cracking problems soon after the installation of floor products, many of which are caused by improper installation.Therefore, whether the service is professional or not also affects the performance of the product.The floor installation is popular and dust-free.Dust pollution in home decoration should not be underestimated.For example, in the floor installation project, wood chips and dust will inevitably appear floating in the air, and the harm is also serious for a long time.People who move into a new house often suffer from the strange disease of new house syndrome. For example, when they get up every morning, they will feel stuffy, disgusting and even dizzy;Easy to catch a cold;Often uncomfortable throat, poor breathing dizziness and fatigue after a long time.This is because of respiratory tract infection. The biggest inducement is the dust suspended in the air for a long time.In order to avoid dust pollution, it is best to choose dust-free installation. From the characteristics of the floor, it is divided into crystal surface, latch, silent, waterproof and so on.San eliapovo, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.

As the wear-resistant layer on the surface of the laminate floor has good wear resistance, compression resistance, impact resistance, fire resistance, flame retardancy and chemical pollution resistance, in daily use, it only needs to be cleaned with a twisted dry rag, mop or vacuum cleaner. If the floor is greasy and dirty, wipe it with a cloth stained with detergent.Precautions for solid wood floor installation : solid wood floor cannot be used immediately after disassembly and packaging.Marina Grande,Different colored floors can create different styles of popular furniture, high-grade calm, classical and unique furniture charm.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor. The machining accuracy is poor, and it is often claimed that it is: imported large plate and domestic slotting.Tubrugg,From the surface of the floor, the solid wood floor can be polished and painted again even if the surface is damaged because it is the whole piece of wood.Tianhe floor adopts Jianfu paint, which is wear-resistant, scratch resistant, excellent surface performance, and greatly prolongs the service life of the floor.However, the whole floor will be completely abandoned.SPC floor has several advantages: imitation of water, imitation of fire, formaldehyde, anti oil stain, can replace ceramic tile and wood floor.Applicable to all major tooling and home decoration.For example,Marina GrandeHow much is the price of laminate flooring? One square meter, schools, hotels, hotels, restaurants and other places.The commonly used floor is generally mm thick, and the .mm wear-resistant layer locks the floor.Such a thick floor generally does not have the situation that the door cannot be closed or affect other s, the material will not be very expensive, the service life is relatively long, and it will not be easily damaged.Consumers who use wood flooring in home decoration know that if it is not maintained properly in the process of normal use, there will be a series of problems with wood flooring.Floor cracking is a common method.Today,Marina GrandeFloor leather splicing, we will discuss why the wood floor cracks.

Stimulating effect.Almost all flooring brands can provide a series of deployment from the aspects of store site selection, terminal store decoration, post opening planning team entry, customized opening plan, etc.Preferential policy support can often guarantee agents, but there are two tips to identify whether these policy support is false or true:Generally, the moisture content of non dry wooden keel is about %, and that of qualified wooden floor is generally about %. If the humidity difference is too large, the wooden floor is easy to absorb moisture quickly. If the time is long, the floor will arch up and the paint will crack.Therefore, it is best to choose dry and straight wood as keel.After the keel level is determined, the keel and floor can be fixed with nails.Packaging strategy,When laying wooden floor, pay attention to the length and direction of the floor consistent with the entry direction to ensure good visual effect.First, choose the brand you need (i.e. grade);Note edit voiceThe third is color.Some customers are very strict about the color of the floor and must maintain the same color difference.But this provision is unscientific.Because the wood is affected by the sun, raw material parts, growth and development parts and lower sawing points, it will inevitably cause inconsistent color difference.

Chamfering rolling paint: a processing technology, which cuts off some of the upper edge of the floor, and then applies paint to cover the color of the substrate, so that the edge color has a sense of hierarchy,Marina GrandeLaminate flooring works, which is similar to the solid wood floor, so it is deeply loved by the majority of consumers.After the chamfered and painted board is paved, there is a very shallow small seam on the upper edge between the board and the board, which is easy to accumulate dust and inconvenient to clean.There is no such problem for boards without chamfering.Online consultation, the indoor air quality and commodity circulation shall be maintained and it shall not be covered with plastic boxes or newspapers, so as to prevent the long-term surface paint layer from becoming sticky and dull.Moreover, families with laminate floors should also pay attention to the removal methods of daily indoor formaldehyde.The usual practices are: Open windows for ventilation to let the polluted air spread at any time; Place green plants in the house to let the plants absorb formaldehyde; Use a purifier, such as anion, to filter formaldehyde; Use chemical collectors, such as formaldehyde collectors, to neutralize formaldehyde.Using these methods, you can minimize the formaldehyde content in your room.Let&#;s look at environmental protection first.Because SPC floor is composed of wear-resistant layer, mineral rock layer powder and polymer powder, of course, it is not afraid of water. There is no need to worry about the deformation and mildew of home floor due to small blisters.The actual effect of waterproof and mildew removal is very good, restaurant kitchen and living balcony can be used.Marina Grande,The quality of the solid wood composite board made of high-grade flowers, plants and trees can also be divided into good and bad. Therefore, it is best to select the solid wood composite floor guaranteed by a well-known brand, which can not only ensure the quality, but also deal with the problems of the store. Soak in waterIn today&#;s building materials industry there are many incidents of profiteering and even damaging the interests of consumers. The bad atmosphere has led to the reduction of consumer trust.The price is in a state of confusion, and consumers are confused. They don&#;t know whether their pay is worth it. Therefore, they all want to know that there is a relatively transparent price.

Wear resistance level.Use place of SPC floor: because of its thin thickness, complete styles and low-carbon environmental protection performance, it can be widely used in kindergartens, hospitals, offices, office buildings, shopping malls, homes, KTV and other public places. Ecological and environmental protection.Senora dahora,'Advantages and disadvantages of laminate flooring'For laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel, seriously endangering human health so it must not be used for home decoration.Therefore, there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is, the formaldehyde emission is ≤ ? / L. although it basically does not pose a threat to the human body, there are still a lot of free formaldehyde left in the floor.The flooring industry has started the second environmental protection revolution and launched E environmental protection standard, which has reduced the formaldehyde emission of the floor to . ? / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, and then smell it with your nose. A good floor should have a wood smell, but a bad one has a strong pungent smell!Fomento,In this category, it can be shown that it is a relatively safe commodity.In addition, it should be noted that the release of formaldehyde must take a whole process of time. The formaldehyde content tested at this stage does not represent the long-term formaldehyde content.First, pay attention to the size of the board, and try to choose a wide board with a length of cm, a width of -cm and a thickness of cm, or a standard board with a width of cm and a thickness of cm.Well known brands not only have the test report produced by China&#;s quality inspection authority;The marks on the packing box of the product are complete.Registered trademark, manufacturer, business unit, model, quantity, address, telephone number, etc.Here to remind you, don&#;t be greedy for cheap to buy three non laminate flooring, so as not to be deceived.

The standard laminate floor surface should contain aluminum oxide wear-resistant paper. It has g, g, g, and even lower. It is directly sprayed with aluminum oxide on the decorative paper. The state stipulates that the surface wear-resistant revolution of the laminate floor for indoor use should be more than revolutions. Only the floor with g wear-resistant paper can meet the requirements. The wear-resistant revolution of g wear-resistant paperThe number of revolutions can reach -, or even lower than g. It is good if the number of revolutions directly sprayed with aluminum oxide can reach -. For those with low wear-resistant revolutions, the tool cost during processing is also low. On the contrary the cost is much higher if the number of wear-resistant revolutions is high.The dark colors completely set off the serious atmosphere.One of the characteristics of industrial style is that it is not decorated, and the cold feeling brought by punching metal. Never soak the floor with water during use. If there is an accident, mop the floor with a dry mop in time.Welcome calls ,Senora dahoraUse of floor leather,Senora dahoraLaminate color,If you want to polish a lot of things you can minimize the spread of dust in the whole house by closing the door and covering it with plastic cloth, tarpaulin and tape.Hardwood floors often need to be polished during installation. In terms of foot feeling, solid wood is better than reinforcement. According to national industry standards, all solid wood is mm thick, and wood keel ceiling is selected for installation, so the upper foot is better than mm thick reinforcement plate.How to distinguish true and false solid wood flooring?How to prevent cracks in wooden floors.

When selecting accessories, we should also consider the cost. We should select thin or narrow right angles and strips, which virtually limits the shrinkage space and causes unnecessary losses.Application process, g, g, and even lower. It is directly sprayed with aluminum oxide on the decorative paper. The state stipulates that the surface wear-resistant revolution of the laminate floor for indoor use should be more than revolutions. Only the floor with g wear-resistant paper can meet the requirements. The wear-resistant revolution of g wear-resistant paperThe number of revolutions can reach -, or even lower than g. It is good if the number of revolutions directly sprayed with aluminum oxide can reach -. For those with low wear-resistant revolutions, the material cost is relatively low; because of its low wear-resistant degree, the tool cost during processing is also low. On the contrary the cost is much higher if the number of wear-resistant revolutions is high. Flatness of foundation ground.In addition to the high wear-resistant solid wood floor, the electronic organ architectural coating floor is also the main product in the recent popular sales market.Beautiful and bright appearance with super thick wear-resistant layer, the actual effect is brighter and deeper, and the upper foot is stronger. The appearance is very similar to the solid wood floor, but the price is far less than the solid wood floor.The solid wood composite floor is overlapped and laminated by the boards of different greening plants, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small, the specification stability is good, and the wood texture and comfortable feet of the solid wood floor are preserved.Senora dahora,Defects: some indoor formaldehyde is restrained, the quality of the sales market is uneven, and most plates are shoddy.One of the modern trends in house design is WPC wood flooring.Because of their many qualities, many people like this floor better than others.However,Senora dahoraHousehold wooden floor, you will also leave people that WPC and SPC flooring have their advantages and disadvantages.If you choose one of them, it&#;s no problem!Now we&#;ll tell you the difference between the two. days later, maggots grow on the floor. This problem occurs because the floor contains a lot of impurities.

In addition to the high wear-resistant solid wood floor, with super thick wear-resistant layer, the actual effect is brighter and deeper, and the upper foot is stronger. The appearance is very similar to the solid wood floor, but the price is far less than the solid wood floor.The solid wood composite floor is overlapped and laminated by the boards of different greening plants, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small,PowadiwazinHow about laminate flooring, the specification stability is good, and the wood texture and comfortable feet of the solid wood floor are preserved. Defects.Powadiwazin,Hearing effect: wood is a natural porous material with good sound absorption and sound insulation performance.Therefore, houses decorated with wood materials have small echo and good sound insulation effect, giving people a comfortable and quiet feeling.Lacquer cloth green ( piece)Comanesti,Waterproof: apply waterproof resin or other waterproof materials at the tongue and groove of the laminate floor, so that the moisture and moisture outside the floor are not easy to invade and the formaldehyde inside is not easy to release, so that the environmental protection and service life of the floor are significantly improved;Especially when laying in a large area, it is inconvenient to leave expansion joints and compression strips, it can prevent floor arching and reduce floor contraction joints.The water resistance is reflected by the water absorption thickness expansion index. If the index value is high, the water resistance is poor, that is, it is easy to cause size change in humid environment.Must not listen to the misleading such as waterproof floor, only moisture-proof floor, the nano fiber feels more astringent when it is exposed to water and is less likely to slip. The more it meets water, the more astringent it becomes.It is suitable for families with old people and children. It is the preferred ground material in public places with high public safety requirements such as airports, hospitals, schools, etc.

A good paper cutter can be used to cut at will. In addition, it can be composed of raw materials with different colors. It is especially suitable for floor tile mosaic ground. It can be composed and matched at will. It makes full use of the intelligence of interior designers to achieve the most ideal practical effect of decoration design;It is enough to turn your ground into handicrafts, and your life and home into a temple of plastic art, full of plastic art atmosphere.The main stressed parts of the floor, such as keel panel layer, shall not have large scars or cracks. Various surface treatments (concave convex pattern, hand grip pattern, pair pattern mirror pattern)The cost is reasonable,Main differences between WPC and SPC flooringSecond, sticky man is thin.The European solid wood composite flooring market showed a slight downward trend in the third quarter of and is still recovering in In the first quarter, only Denmark completed a slight improvement.China&#;s three-layer solid wood composite floor has a good export market under the overall downturn of the international market.More than % of Jilin&#;s materials are exported, and China&#;s solid wood composite flooring has become a fashionable material in European countries.Floor road construction is the key way of home decoration. Choosing which floors, how to build roads and how to check are the problems concerned by interior decorators.Recently,PowadiwazinWhich is a good SPC floor, and customers attach great importance to quality.Nowadays, large and medium-sized flooring has the trend of replacing small and medium-sized flooring.Solid wood flooring materials are not enough, and large and medium-sized composite flooring has gradually become a new pet for home decoration.However it must be noted that some floors are made of fake and shoddy raw materials, so I should pay attention to corner material floors when purchasing floors.

Fourth, wear resistance means that it is not easy to scratch with artifact.Marketing Department,How to lay lacquer cloth?The construction procedures and methods are as follows: first, measure the structural size of the room accurately;Then cut the lacquer cloth according to the size.Note that the cutting width should be slightly larger than the required width to facilitate overlapping, matching and trimming during paving.The cut floor paint cloth shall be placed at room temperature of no less than ℃ for about hours, so that the crimped part of the floor paint cloth can be fully extended and ready for the final paving.Special adhesive shall be used for paving the floor paint cloth.Before paving, the indoor ground shall be treated first.If the scratch is shallow and the paint layer on the surface of the solid wood floor is not damaged, it can be polished with polishing paste immediately after the floor is cleaned.Because the polishing paste is mainly to maintain the luster of the floor and make the surface of the solid wood floor more and more smooth,PowadiwazinFloor paint, it is not easy to cause deeper damage to the scratch area, and the scratch can also be repaired.The surface of SPC floor has a special transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach more than revolutions.Among the traditional ground materials, the wear-resistant laminate floor has only - revolutions.The name SPC floor is easy to cause people&#;s misunderstanding. SPC floor is one of the categories of PVC floor. When you think of PVC floor, you think more of plastic. Many people will confuse PVC floor with PVC pipe. Plastic contains toxic substances and is harmful to human body.Powadiwazin,High concentration formaldehyde is a genotoxic chemical.In animal experiments, high concentration inhalation in the laboratory can cause nasopharyngeal tumors. SPC floor is considered as a new generation of floor materials, which is characterized by extremely stable, high performance, complete waterproof, high-density sales core and pressure mark;It can be easily installed on different types of ground bases, concrete ceramics or existing floors.The thickness of SPC floor is mainly selected according to personal needs.Of course, the floor thickness affects the floor price, and the service life will be different, but it does not mean that the thicker the floor is, the better. We need to select according to whether the installation will affect the door closing or other s;Whether the overall effect after installation will be uncoordinated;Material budget and other aspects to select the most appropriate floor thickness.