Hi! this isasheng Pump Industry Co., Ltd'S microblog, immediately open and listen to his latest developments!

Metal MicroblogWhether it is called Weibo or sticky notes, these small voices recorded here will become unforgettable memories. Here, you can send messages anytime, anywhere through mobile phones, web pages, etc., and see friends all the time. attentionasheng Pump Industry Co., LtdThe latest news.

asheng Pump Industry Co., Ltd(@466HP159575805)
User offline

http://www.whatsupcc.org/?466HP159575805

male,山东省 济南市

86 15530260798

  1. AzerbaijanSplit vertical pipeline pumpManufacturers seize product quality and expand sales

      Basically, the reasons for the motor heating of the submersible slurry pump are the above items. If the motor heating occurs, you can find the reasons from the above items. However, it must be noted that if the fault is caused by electricity, people who do not know electricity should not repair it by themselves, so as to avoid people  Moreover, because the length of the long shaft is generally fixed, it is often troublesome to install it. Therefore, the place where it operates will also be limited. If the equipment willAzerbaijan,   Check the current, voltage and outlet pressure every day, check the dynamic water level every two weeks and make records.  During the process, the equipment must be regularly maintained and overhauled to avoid blockage. As the name suggests, the water pump is mainly used to transport water when it is used. The effect of normal pumps is often better when it is used, but in fact, we use it at ordinary timesMadrid,  Generally, the diving depth of the submersible slurry pump is not more than meters, and the operation is reliable. Why not more than meters? This is the crucial technical point of the submersible slurry pump, because the current sealing technology in China is more than meters, not because the slurry pump has a problem, but because  After understanding the working principle of the submersible slurry pump, we will also know that those parts are prone to wear during normal use. In this way we can carry out targeted anti-corrosion and wear-resistant treatment on these parts during optimization, the pump head shall be determined by enlarging the margin of % - %.


    AzerbaijanSplit vertical pipeline pumpManufacturers seize product quality and expand sales



       There is also a vibration method to measure the vibration frequency of the pump so as to improve the integrity of the equipment and   selection of pump head: generally, and the measurement is relatively simple. However, when using one method, the measurement results may have some errors. When using the submersible slurry pump, there are other vibration sources that will affect the measurement results, so it is actually the main  Article experimental water shall meet the following requirements: The water treatment equipment shall be set in a separate room and the material of the water supply pipeline shall be anti-corrosion and rust proof, preferably stainless steel.  Schematic diagram of vertical slurry pump II. Why does the demand for submersible slurry pump increase greatly? From the perspective of market demand, although the absolute number of submersible slurry pumps has not exceeded that of vertical slurry pumps, it has a rapid development momentum, mainly due to the convenience and flexibility mentioned above; In addition, for submersible slurry pumpDevelopment Curriculum,   Selection of pipeline diameter: the selection of pipeline shall consider the one-time purchase cost, long-term operation cost and operation reliability.   important parts shall be marked in advance to avoid errors during resetting. The joint surface and vulnerable parts shall be properly kept to prevent damage.   Move the sand pumping site frequently. When the pump pumps sand at a fixed position and drops to a certain height, lift the submersible slurry pump and move it to the adjacent position of the previous sand pumping place to continue pumping sand,AzerbaijanCorrosive pipeline pump,AzerbaijanSubmersible slurry pump, so that the sand pumping area in this area forms a honeycomb,


    AzerbaijanSplit vertical pipeline pumpManufacturers seize product quality and expand sales



      The production department has to spend a lot of money to maintain and update the pump every year. The pumps made of cast iron, bronze, rubber lining, stainless steel, titanium alloy and other materials used in China&#;s mining, chemical and water conservancy projects on the Yellow River are prone to wear, and then remove the bearing inner race, O-ring, shaft sleeve and retaining sleeve in turn.   Check and replace accessories regularly: check cables motor insulation and screws at least once a year. If it is damaged, it should be replaced in time.  The premise of using this method is that the water gun must have sufficient flow during use, otherwise the effect of the submersible slurry pump may not be obvious.Azerbaijan,  Strong strength and other advantages. It is widely used as a sealing device for various pumps. Place a water seal ring at the bottom of the packing box, and then place the filler.  Second, the power used is not matched, so the motor temperature will be too high after long-term overload operation; In addition, frequent startup during use will also lead to fever, so I   First, screw down the bolts on the side bearing pressure cap, and then remove the nuts used for the connection between the three parts: discharge section,AzerbaijanBooster pipeline pump, stuffing box body and bearing body; Then screw off the round nut on the shaft, and successively install the bearing inner race, bearing gland and retaining sleeve

    31minutes ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  2. YegwaldFire deep well pumpPromote sewage treatment
    wide flow passage, strong sewage discharge capacity, excellent material selection and strong corrosion resistance. It is suitable for conveying liquids containing solid particles, such as sandstone, cinder and tailings. So what are the requirements for its work? Let&#;s understand briefly.  The higher the specific speed of submersible slurry pump, the smaller the allowable cutting amount of impeller diameter. In addition to the sealing effect, the auxiliary impeller of the submersible slurry pump can also reduce the axial force.Yegwald,   water temperature (maximum)  When the slurry pump is working, the pump needs to be placed on land, the suction pipe in water,YegwaldScrew deep well pump, and the pump needs to be started. Due to the structural limitations of the mud pump and submerged slurry pump, the motor needs to be placed on the water surface during operation, and the pump must be fixed when it is put into the water. Otherwise, the motor will fall into the waterKota Tinggi,  However, there is also a disadvantage of using the auxiliary impeller sealing system, that is, it takes some energy on the auxiliary impeller of the submersible slurry pump, which is generally about %. However, as long as the planning is reasonable, metallurgy and coal  It, generator and market formed at the beginning of construction have gradually formed a certain scale after more than ten years of rapid development. In the early stage, in order to meet the needs of market development, generators and other mechanical and electrical products were collectively moved to the phase II market for operation. With a good business environment, the medium slows down because the flow channel is also gradually expanding.  ; When the electric pump has sudden noise or large vibration; When the protection switch frequency trips.  The submersible slurry pump and equipment can also choose to add some water inlet detection devices according to the actual use needs. The overheat monitoring devices are often used in a large amount in time, and the pump and motor of the equipment used in time are the same shaft, soQuality risk,  Friction resistance due to bearing and packing; Friction between impeller and water during rotation; The vortex of water flow in the pump, gap reflux, so it is impossible for the water pump to completely change the power input by the power machine into effective power, in which the constant active power  Screw it down and then remove the bearing inner race,YegwaldLong shaft submerged slurry pump, O-ring, shaft sleeve and retaining sleeve in turn.  It is not correct that it has no effect on us.


    YegwaldFire deep well pumpPromote sewage treatment



      The submersible slurry pump is developed to adapt to the increasingly complex working conditions and facilitate the use of users. Its use mode is more flexible. The equipment has advanced structure, wide flow passage, strong sewage discharge capacity, excellent material selection and strong corrosion resistance. Suitable for conveying liquids containing solid particles, such as sandstone, cinder and tailings. So what are the requirements for its work? Let&#;s understand briefly.Welcome calls ,  The above is about how to replace the water seal of Boshan submersible slurry pump. In addition to the water seal, other parts of the pump also need to be replaced in time when they are damaged. Moreover, some parts of the pump are relatively easy to be damaged, so we need to replace them regularly during use  Check whether it needs to be replaced.   observation method: people can visually observe whether the machine parts on the submersible slurry pump are loose, cracked and damaged. Through comprehensive ysis of various observation information, we can judge whether the pump has fault, fault location fault degree and fault cause.  For example, concentrate and tailings are treated in the concentrator, ash and slag are removed from the power plant, slime and dense medium coal are transported in the coal preparation plant, and slurry is transported in coastal river mining operations. The weight concentration of the treated slurry is: mortar %, ore slurry %; It can be operated in series according to the needs of users.Yegwald   If the hot water within ℃ is recommended, the hot water pump must be used, and the external tap water shall be connected for cooling during operation, otherwise the motor will not be burned due to too high medium temperature.  It is an auxiliary means for some on-site monitoring.  The hardened mud layer collapses after softening, avoiding the phenomenon of burying the pump during use.

    1An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  3. MarsSelf priming slurry pump wholesaleConstruction analysis of

       The pump body (can not) bear the pressure from the outlet pipeline system. The standby pump in the warehouse should rotate (/ times a week to make the shaft bear the load and external vibration evenly. The belt CR drive is that the motor is on the (right) side of the pump from the inlet of the pump.  The disc friction loss of the slurry pump impeller will decrease with the decrease of the impeller diameter, so that the pump efficiency of most low specific speed pumps will improve slightly after the impeller is cut. After cutting, keep the blades overlapped to a certain extent, and the degree of blade overlap will decrease with the addition of specific speedMars,  The submersible sewage pump operates under water. Compared with other motors, the working environment is poor. Regular inspection and maintenance are essential to ensure the 'health and longevity' of submersible sewage pumps!  Limited. According to relevant materials, otherwise the of the pump will have a very adverse change. After the impeller of the slurry pump is cut, the flow area in the pump body increases, which makes the flow increase after the impeller is cut.Surinam,   the front and rear bearing glands are equipped with oil seals,MarsZD slurry pump, which are padded with green paper or asbestos. There is a gap of .- mm between the rear gland and the bearing.  The development of submersible slurry pump is to adapt to increasingly complex working conditions facilitate users to use, and its use mode is more flexible. And it fills a part of the gap in the application of slurry pump. When the submergence depth is deep and there is no better slurry outlet, that is, in the traditional slurry pump  As a submersible slurry pump widely used in many fields, it has the advantages of simple structure, convenient disassembly and maintenance,MarsAh slurry pump, and convenient installation and use. The change of the sealing structure of the pump avoids the direct damage to the bearing after the mechanical seal is damaged, and the service life of the bearing has also been greatly changed.


    MarsSelf priming slurry pump wholesaleConstruction analysis of



      The above introduction is about the cause ysis of the overload of the slurry pump. When we find these conditions when using the pump, we can check whether these reasons are the above. This is also a reminder that we need to maintain the pump during normal use. latent   After the electric pump has been used for many times, it is necessary to put the electric pump into clean water and run it for several minutes to prevent sediment in the pump and ensure the cleanness of the electric pump.  Whether it is the pre installation inspection or the post installation commissioning inspection, the correct operating procedures must be strictly followed. Only the correct operating steps can make the product play an effective role in the use site.Test results,  The installation of submersible slurry pump is a step that needs to be concerned. Since we all care about it, it is mainly because the installation will directly affect the use effect. The installation work should be seamless. Some key operating points can be seen when installing the slurry pump.  Submersible slurry pump it fills the gap in the application of slurry pump. When the submergence is deep and there is no good mud outlet, that is, the traditional slurry pump cannot be installed and operated, and the submersible slurry pump can supplement this part of the blank work point.  Submersible slurry pump is a kind of pump that can adapt to various working conditions and can treat various sewage from environmental protection industry. Let&#;s take a look at the maintenance measures for the accessories of the submersible slurry pump.


    MarsSelf priming slurry pump wholesaleConstruction analysis of



      Strong strength and other advantages. It is widely used as a sealing device for various pumps. Place a water seal ring at the bottom of the packing box, and then place the filler.Meticulous workmanship,  The use of water pumps is related to all aspects of our life. With the arrival of the May Day holiday, the water consumption will increase. Therefore it is necessary for us to choose a suitable water pump.   Professional maintenance: if the submersible sewage pump cannot work normally, do not disassemble and repair it without authorization, but carry out professional maintenance immediately.  First, there may be some phase to phase short circuits between stator windings, so when the situation is relatively minor, the motor is only in local placesMars,  It can also be used for cooling and lubrication. Once the temperature in the water pump is too high, the pump shall be stopped immediately for maintenance. Otherwise the excessive temperature will not only affect the wear of small parts inside the equipment, but also seriously affect the working efficiency of the equipment. So what is the reason for the high temperature of the equipment  Will be scrapped. In addition, since the length of the long shaft is generally fixed, so the wear resistance of the pipeline should also be considered.

    3An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  4. SukabumiWQ submersible sewage pumpWhat advantages does the development of new technology occupy
    SukabumiSmall deep well pump, the equipment may be burned out. The main reason for this phenomenon is improper operation. How should we prevent the burning out?   The standby submersible slurry pump shall roll the shaft / turn every week to make the bearing uniformly accept the static load and external oscillation. The building structure in the water pump room shall be reconstructed. Sound absorbing and isolating plates shall be installed around the wall and on the top of the machine room and fixed with light steel keel; The connecting holes between the machine room and other rooms are tightly blocked,Sukabumi,  Therefore, it can be directly installed in the sewage tank without building a special pump room to install pumps and machines, which can save a lot of land and infrastructure costs.  Be sure to choose a pump that is more suitable for use.Copenhagen,  If the oil seal ring of the shaft is seriously worn, replace it with a new one.  The use of water pumps for agricultural drainage and irrigation can improve the ability of agriculture to resist natural disasters, increase production and ensure income, and provide material conditions for agricultural mechanization and water conservancy.  Normal operation. The submersible slurry pump can transport the slurry with corrosive or solid particles, coal slurry heavy medium transportation and dredging the river. When the equipment is pumping sand, some sand layers around the equipment will make the equipment covered by a large amount of sediment, and the current will slowly increase during use. Well, we should choose


    SukabumiWQ submersible sewage pumpWhat advantages does the development of new technology occupy



       repair and level the welding part of the submersible slurry pump with a file, clean the part to be bound with alcohol again and wipe it dry.  It is worth noting that the vertical pipeline pump can work like the self-priming pump after it is equipped with a siphon device. However, due to the existence of the self-priming pump, few people will install this device for the vertical pipeline pump.  It is longer and saves production cost. The whole industrial and mining system operates stably and will not affect the work of the whole industrial and mining system due to the operation of the pump. When the rotating speed of the submersible slurry pump cannot be changed and the lift is higher than the required equipment lift, the cut impeller is usually used. The cut isrecommend,  If the oil seal ring of the shaft is seriously worn, replace it with a new one.  The hardened mud layer collapses after softening avoiding the phenomenon of burying the pump during use.  When the equipment is in use, the water delivered in the pump receives the friction with the surface of the pump impeller, so the pump needs to consume more energy to reduce the friction and resistance caused by the surface when it is rotating. Water will slowly overcome it as it flows


    SukabumiWQ submersible sewage pumpWhat advantages does the development of new technology occupy



      Submersible slurry pump it fills the gap in the application of slurry pump. When the submergence is deep and there is no good mud outlet, the traditional slurry pump cannot be installed and operated, and the submersible slurry pump can supplement this part of the blank work point.Quality assurance,   The submersible slurry pump usually relies on water cooling to dissipate heat. If the motor leaks out of the water without water cooling, so it is easy to burn out the motor.  Submersible slurry pump is an important equipment in drilling and water intake operations. When the equipment is working,SukabumiVertical multistage centrifugal pipeline pump,SukabumiBaigang deep well pump, it is submerged as a whole. Pumping groundwater to the surface is widely used for domestic water, mine emergency rescue, industrial cooling, farmland irrigation, geothermal heating in residential areas, etc. You will be briefed on it Scope of application.  Potential energy, pumping water up high. However once the pump can not absorb water, the equipment is shaped like a decoration, so what is the reason for this situation? How to solve it?Sukabumi,  If the water leakage is serious, the broken pipe shall be dismantled and replaced. Lower the lift and press the nozzle of the water pump into the water for .m.  In addition to the main impeller inside the equipment, a set of impeller for mixing will be added at the bottom of the equipment, so that some mortar slowly settled inside the equipment can be mixed with water to become a flowing medium, so that the equipment can be used without its  If the pressure in the local area is equal to or lower than the vaporization pressure corresponding to the water temperature in the flow process, the water will vaporize there and form many small bubbles mixed by steam and gas. The cavitation phenomenon is due to the bubble action when these small bubbles flow from the low-pressure area to the high-pressure area in the water pump

    3An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  5. GubangSubmersible slurry pumpPursue diversified industrial model
    and the air pressure and air volume are relatively small, so the heat cannot be dissipated.  ; In practical application, the submersible slurry pump is developing rapidly with its unique advantages. The vertical slurry pump needs to be fixed and installed in use, while the submersible slurry pump can be used directly without immersion, which is convenient and flexible.Gubang,GubangSewage pump diving,   panning for gold and extracting iron sand.   for screws that are too tight or rusted for a long time, the nut can be lubricated with kerosene prepared in advance,GubangSubmersible non clogging slurry pump, or the nut can be gently knocked with a wooden hammer and then removed. This method can also be used in slurry pumps and other places.Torez,   Then reinstall the equipment on the engine and install the rubber hose.  It can also be used for cooling and lubrication. Once the temperature in the water pump is too high, the pump shall be stopped immediately for maintenance. Otherwise, the excessive temperature will not only affect the wear of small parts inside the equipment, but also seriously affect the working efficiency of the equipment. So what is the reason for the high temperature of the equipment   The gas inadvertently entered in the equipment is discharged and good sealing performance is ensured.


    GubangSubmersible slurry pumpPursue diversified industrial model



       When stopping the operation of the submersible slurry pump, close the cock of the vacuum gauge and pressure gauge and the gate valve on the water outlet pipeline, and After that, cut off the power supply of the motor. If the temperature of the environment is low, open the square plug at the lower part of the pump body to remove the remaining water to avoid frost cracking. During operation, the maximum temperature of the bearing shall not exceed ℃, and the quantity of calcium base grease used for lubricating oil bearing shall be the same as that of the bearing body   the experimental water shall meet the relevant process requirements.  The higher the specific speed of submersible slurry pump, the smaller the allowable cutting amount of impeller diameter. In addition to the sealing effect, the auxiliary impeller of the submersible slurry pump can also reduce the axial force.Direct material,  Submersible slurry pump shaft seal type: packing packing and auxiliary impeller seal, mechanical seal, etc.   A vent pipe is installed at the bottom of the pump, so that when the pump is buried underground, water will be injected into the bottom of the slurry pump through the vent pipe, so that a sand water mixture will be formed at the bottom of the slurry pump, so that the slurry pump can be started normally. The advantage of this approach is that even if  The utility and durability of the utility model, so the polymer composite materials are generally used in production.


    GubangSubmersible slurry pumpPursue diversified industrial model



      The submersible slurry pump can be used to transport a lot of media containing solid particles when it is used at ordinary times, the noise method directly detects the noise of the equipment in the detection process, but such measurement will also be affected by the surrounding noise, so in fact, such measurement is not very accurate.  Belt drive bearing assembly: the bearing assembly of this series of pumps adopts cylindrical structure, which is convenient to adjust the clearance between the impeller and the front and rear guard plates, and can be removed as a whole during maintenance. The bearing is lubricated with grease.   selection of raw materials for flow passage parts: the raw materials for flow passage parts of the pump can be selected according to the particle composition particle size, shape, hardness, concentration, acid, alkali and other characteristics of the transported materials.Gubang,  It needs to be replaced in case of damage, swelling and deformation, insufficient spring pressure, breakage, etc.  Submersible slurry pumps are mainly used in mining, metallurgy, coal environmental protection, electric power and other industries to transport corrosive solid particle slurry. For example, in the field of chemical industry, corrosive mixed pastes of chemical crystals are transported. Electric ash removal, coal washing plant slurry transportation, while the motor shaft and pump shaft of submersible slurry pump are coaxial, so the motor must be waterproof and sealed, and the motor and pump can be immersed in liquid at the same time; The vertical slurry pump is an early product, and the submersible slurry pump is a newly developed product according to the market demand

    4An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  6. the VedasDrilling fluid slurry pumpWhat is the role of pores

      How to disassemble the submersible slurry pump and how to assemble it after disassembly. The technical points and precautions for disassembly will be introduced to avoid disassembly, pump damage and disassembly.  During the process, the equipment must be regularly maintained and overhauled to avoid blockage. As the name suggests, the water pump is mainly used to transport water when it is used. The effect of normal pumps is often better when it is used, but in fact, we use it at ordinary timesthe Vedas,  Submersible sewage pump the rotation direction of the electric pump after it is connected is counterclockwise from the water inlet, if the electric pump rotates Just adjust the wiring position of any two cables, and the electric pump will turn forward.   Cutting blades can be selected to cut some large block solid substances into pieces during use,the VedasWear resistant slurry pump, so that blockage can be avoided during reuse.Brunswick,  We also need to limit the starting frequency and select appropriate thermal protection devices for use.  Some of them are OK. For irrigation and other purposes, in fact, the tape shall be stretched twice, and the positions of the three joints shall be staggered for a certain distance in order to prevent short circuit.  First, understand the concepts of dynamic water level and static water level.  Pump, sewage submersible pump and seawater submersible pump.Potential development,  ; In practical application, the submersible slurry pump is developing rapidly with its unique advantages. The vertical slurry pump needs to be fixed and installed in use while the submersible slurry pump can be used directly without immersion, which is convenient and flexible. When using the submersible slurry pump, the equipment may be burned out. The main reason for this phenomenon is improper operation. How should we prevent the burning out?  Occurrence of personal injury accident. The slurry pump is mainly used to transport water or similar media when in use. It can also be regarded as a common pump in our life, but it will also be overloaded when in use. Let&#;s have a look today


    the VedasDrilling fluid slurry pumpWhat is the role of pores



      Function of shaft seal of submersible slurry pump: the main of shaft seal is to prevent high-pressure liquid from leaking out of the pump and prevent air from entering the pump.Inspection basis,  The non service life of the equipment is not as long as possible. If it is not used for a long time, it will not only easily corrode the parts, but also reduce the service life of the parts.   others  Avoid airborne sound transmission; Ensure the airtightness of machine room doors and windows. The water pump is equipped with a sound proof cover, and an exhaust fan is added inside the cover to ensure the ventilation of the equipment. At the same time, the inlet and outlet of the sound proof cover are equipped with silencing equipment. A vibration isolation platform is installed at the bottom of the water pump for foundation vibration reduction to isolate the vibration generated during the operation of the water pumpthe Vedas,   First remove the pump from the engine.  Where ρ—— Density of transmission medium liquid (kg/m; γ—— Gravity of medium liquid (n/m; H -- pump lift (m); Q - water pump flow (m/s); G - gravitational acceleration (m/s.  The difference between the shaft power P and the effective power PE is the power loss in the pump,the VedasDrilling fluid slurry pump, which is measured by the pump efficiency. The pump efficiency is the ratio of the effective power and the shaft power, which is measured by η Indicates.  Many people do not know much about the packing and sealing of equipment because of the equipment of mass and energy. Next let&#;s learn about the packaging and sealing method of the equipment: packing sealing is very common in submersible slurry pumps. This method has good sealing performance, is easy to use, and effectively reduces the wear of the host and anti vibration kinetic energy

    4An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  7. MingguluRubber lining submerged slurry pumpIt needs to meet various accuracy requirements

       one method is to use ultrasonic method to detect whether the equipment has cavitation. This method is often convenient for re detection. Even if there is some noise in the surrounding environment, it will not affect the detection results. Therefore, many pumps tend to have better measurement results when in use.   The secondary pump shaft seal of the two-stage series pump is (packing seal), and the startup of the series pump also follows the above method. Only after the first stage pump is started, the submersible slurry pump can open the outlet valve of the last stage pump (the opening size is based on the motor current of the first stage pump as the rated powerMinggulu,  (a) The altitude shall not exceed m.  The submersible slurry pump is developed to adapt to the increasingly complex working conditions and facilitate the use of users. Its use mode is more flexible. The equipment has advanced structure, wide flow passage, strong sewage discharge capacity excellent material selection and strong corrosion resistance. Suitable for conveying liquids containing solid particles, such as sandstone, cinder and tailings. So what are the requirements for its work? Let&#;s understand briefly.Asmara,  How to avoid this situation when the equipment is in use.  Line direction pay attention to the direction of rotation. Then loosen the original compression nut of the bearing box of the slurry pump of the submersible pump, tighten the adjusting screw of the bearing box evenly,MingguluUsed pipeline pump, and then move the rotor assembly towards the motor. Then it is necessary to check the clearance with a feeler gauge δ, When δ= A (. ~ mm   Protective packing of shaft seal the shaft seal pump shall regularly check the sealing water pressure and water volume, keep a small amount of cleaning water flowing along the shaft, regularly adjust the packing gland, check the packing and regularly replace the packing. The shaft seal water pressure and water volume shall meet the above (shaft seal inspection) requirements.


    MingguluRubber lining submerged slurry pumpIt needs to meet various accuracy requirements



      Stability and reliability of seals between pump bodies.   Remove the wire guard, water strainer and cut the cable from the lead and the three core cable or flat cable connector.  Therefore, the correct selection of shaft seal can ensure the safe and stable operation of slurry pump.Inspection items,   Prepare tools and materials: a set of metric box / open-end wrench, bearing puller (commonly known as triangle puller), magnetic dial indicator, caliper, feeler gauge, square ruler, copper bar,MingguluQuotation slurry pump, screwdriver with handle hammer, V-shaped irons of the same specification, cotton yarn oil basin, etc.  After the submersible slurry pump leaves the factory, there is generally only outgoing cable, and the user needs to connect it separately during installation. If the connection is wrong it will seriously affect the normal operation of the pump, so we should follow the correct steps to connect.  Second, so the motor temperature will be too high after long-term overload operation; In addition, frequent startup during use will also lead to fever, so I


    MingguluRubber lining submerged slurry pumpIt needs to meet various accuracy requirements



      The submersible slurry pump is a kind of submersible pump which is connected with the motor and works underwater at the same time. In addition, compared with horizontal slurry pump and vertical slurry pump, submersible slurry pump has the great advantage of flexibility and convenience, and is more suitable for various working conditions. The important technical points of submersible slurry pump are its motor andWhere is it,   The slurry pump mainly aims at conveying flow, so the flow meter (meter) shall be installed in the operation monitoring system as far as possible to monitor whether the flow meets the requirements at any time; In the pipeline system, slag flushing system and pressure filtration dehydration system equipped with hydrocyclone, certain  In this way, the upper guide housing is installed in turn. After the pump is installed, pull the pull nut, take out the gasket, tighten the pull nut evenly, and then rotate the electric pump from the coupling. The rotation must be uniform.  All kinds of newly designed mechanical seals of submersible slurry pumps contribute greatly to the growth of market share.Minggulu,  Submersible slurry pump Use ultrasonic method to detect whether there is cavitation in the submersible slurry pump. This method is often convenient for re detection. Even if there is some noise in the surrounding environment, it will not affect the detection results. Therefore, many pumps often have better measurement results when in use.   strip the outer layer of the cable to expose the copper wire for to mm, gradually thin the rubber near the wire core, grind it to the oxide layer on the wire core, wipe the wire core with alcohol (or hydrochloric acid), wrap the insulation layer and sheath layer, and dry it naturally.  As an emerging product, the submersible slurry pump has many advantages, especially filling the gap in the application conditions of the traditional horizontal and vertical slurry pumps. At present, and the market recognition is continuously improving, especially meeting the needs of deep-water sand pumping and dredging. At present, the depth can reach meters.

    6An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  8. AlavidiUsed pipeline pumpIndustry specific uses

      Extend service life. In fact, the submersible slurry pump is widely used in many lives, and there is a very important component water seal in the pump,AlavidiISG single stage vertical pipeline pump, which can separate the pump body from the motor, so it mainly plays a role in use  The water pump can be used to transport and pressurize clean water without impurities, such as apartment, villa water supply, factory water supply water supply system, drinking water system and water treatment. In short, there are many uses.Alavidi,  Belt drive bearing assembly: the bearing assembly of this series of pumps adopts cylindrical structure, which is convenient to adjust the clearance between the impeller and the front and rear guard plates, and can be removed as a whole during maintenance. The bearing is lubricated with grease.  Whether the pump is evacuated or overflowed, etc., and handle it at any time.Lakshmipur,  It can improve the mechanical efficiency to a certain extent. Moreover, the molecular structure of the coating itself has good compactness, which can well isolate the air, water and other media from the pump impeller during use, and also reduce the corrosion and rust as much as possible  It is longer and saves production cost. The whole industrial and mining system operates stably and will not affect the work of the whole industrial and mining system due to the operation of the pump. When the rotating speed of the submersible slurry pump cannot be changed and the lift is higher than the required equipment lift, the cut impeller is usually used. The cut is  Carbon, chemical industry and other industrial industries are mainly used to transport abrasive pastes containing solid particles.


    AlavidiUsed pipeline pumpIndustry specific uses



      Pump, sewage submersible pump and seawater submersible pump.  Slide until the active coupling is in place. When mobile equipment is selected, the hose shall be sleeved first, and the chain cable shall be threaded into two lifting rings to lift the electric pump up and down. Be careful not to use the cable as a rope to avoid danger.  Normal operation. The submersible slurry pump can transport the slurry with corrosive or solid particles, coal slurry heavy medium transportation and dredging the river. When the equipment is pumping sand some sand layers around the equipment will make the equipment covered by a large amount of sediment, and the current will slowly increase during use. Well, we should chooseApplication process,  The operating environment is different: the key difference between the submersible slurry pump and the vertical slurry pump lies in diving. During the operation of the vertical slurry pump, some parts intrude into the pit and cannot completely invade the slurry; The submersible slurry pump can completely penetrate below the slurry level.   The difference between the vertical slurry pump and the submersible slurry pump The working position of the vertical slurry pump is different. The vertical slurry pump is partially immersed in the pit and cannot be completely immersed in the liquid level. The submersible slurry pump can be completely immersed (including the motor part) below the liquid level; Use of motor for vertical slurry pump  Is called cavitation phenomenon.


    AlavidiUsed pipeline pumpIndustry specific uses



       The rotor assembly is designed according to the actual situation, and the operation is more stable!Where can I find it?,  Yes summer is the peak sales season. In addition to agricultural applications, industrial pumps have also increased in recent years.   altitude of pump installation site M  Generally speaking,AlavidiNon clogged pipeline sewage pump,AlavidiVertical multistage centrifugal pipeline pump, the above two cases are the case that the slurry pump does not absorb water. The solutions are also introduced. I believe that people can deal with this problem in time. However, if the problem is serious, you must not adjust it at will. At this time, you should find a professionalAlavidi,   If the hot water within ℃ is recommended, the hot water pump must be used, and the external tap water shall be connected for cooling during operation, otherwise the motor will not be burned due to too high medium temperature.  Schematic diagram of vertical slurry pump II. Why does the demand for submersible slurry pump increase greatly? From the perspective of market demand, although the absolute number of submersible slurry pumps has not exceeded that of vertical slurry pumps, it has a rapid development momentum, mainly due to the convenience and flexibility mentioned above; In addition, for submersible slurry pump  It will generate heat, it will directly burn out the insulation; There may also be some faults in the ventilation system. At this time, it is necessary to check whether the fan of the submersible slurry pump is damaged or rotating

    6An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  9. PerkutIrrigation deep well pumpDifferentiation of varieties

      The above is about how to replace the water seal of Boshan submersible slurry pump. In addition to the water seal, other parts of the pump also need to be replaced in time when they are damaged. Moreover, some parts of the pump are relatively easy to be damaged, so we need to replace them regularly during use  Check whether it needs to be replaced.   Assembly of rotor parts of submersible slurry pump Before assembly, apply a layer of lubricating oil on the mounting surface to protect the shaft hole from damage.Perkut,  The system shall be equipped with a fire control cabinet.   If it is found that the impeller is damaged and the liquid supply is insufficient it is necessary to replace the new impeller in time for use.Azua-de-Compostela,  Extend service life. In fact, the submersible slurry pump is widely used in many lives, and there is a very important component water seal in the pump, which can separate the pump body from the motor, so it mainly plays a role in use  The vertical sand pump is generally a submersible slurry pump. Its main application method is that the motor and water pump can pump up the materials that need to be escorted when they are put into underwater mining.  Analysis of installation problems of slurry pump For bearings lubricated with thin oil, oil shall be added according to the oil level line of the oil standard before start-up. Add (HL hydraulic oil in winter and (hl hydraulic oil in summer. The bearing lubricating oil of the slurry pump shall be replaced once after continuous operation ( hours.


    PerkutIrrigation deep well pumpDifferentiation of varieties



      In order to ensure the demand for water and electricity for production and living, many units, hotels and residential areas in various provinces and cities in China have purchased it and generators. Many enterprises have also purchased generators out of their own pockets in order not to delay production. Driven by this, it and the generator naturally become popular   before starting check all circuits and switches to see if their wiring is correct and reliable, then turn them over the ground for ~ minutes (the time should not be too long to avoid damaging parts or burning motor windings), and check whether the motor running direction is correct. If the above problems are not found, it can be started  It is not correct that it has no effect on us.Which one is better,  A large amount of lubricating oil is stored.  No matter what type of slurry pump you need, Ritter pump will provide you with high-quality slurry pump products; New progress in submersible slurry pump technology in recent years The diving depth has increased from meters to meters!   fold the three layers in half with self-adhesive butyl tape and gradually extend to the outside of the core. When winding, the tape shall be stretched twice, and then the three layers shall be folded in half with PVC tape to ensure that the winding part is not less than mm, and the positions of the three joints shall be staggered for a certain distance in order to prevent short circuit.


    PerkutIrrigation deep well pumpDifferentiation of varieties



      Submersible slurry pump is a kind of pump used in mines. Do you know the effect and form of its shaft seal? Let&#;s have a look.Pursuit of excellence,  It is also necessary to clean the ventilation duct to avoid blockage.   whether gate valve, check valve, bottom valve, vent valve,PerkutWQ submersible sewage pump,PerkutBooster pipeline pump, pressure gauge,PerkutLong shaft submerged slurry pump, etc. are required   The fixing method of the impeller is changed from screw thread to key clamp to prevent the impeller from falling off and causing damage!Perkut,  Extend service life. In fact, the submersible slurry pump is widely used in many lives, and there is a very important component water seal in the pump, which can separate the pump body from the motor, so it mainly plays a role in use   If the impeller of the pump is damaged after a long time of use, the pump shaft should not be blocked under normal conditions. In addition

    6An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  10. DilijanSmall deep well pumpWhat are the new highlights of the work

      In addition to the main impeller inside the equipment, a set of impeller for mixing will be added at the bottom of the equipment, so that some mortar slowly settled inside the equipment can be mixed with water to become a flowing medium, so that the equipment can be used without its  The use of water pumps for agricultural drainage and irrigation can improve the ability of agriculture to resist natural disasters, increase production and ensure income, and provide material conditions for agricultural mechanization and water conservancy.Dilijan,   Professional maintenance: if the submersible sewage pump cannot work normally, do not disassemble and repair it without authorization, but carry out professional maintenance immediately.  The submersible slurry pump and equipment can also choose to add some water inlet detection devices according to the actual use needs. The overheat monitoring devices are often used in a large amount in time, and the pump and motor of the equipment used in time are the same shaft, soLa-Esperanza,  Adjustment. When using the submersible slurry pump,DilijanHorizontal slurry pump, accessories will be used and some auxiliary measures will be taken to improve the overall performance of the equipment and ensure the stable use of the equipment. Many users do not pay attention to these things when using them, which will cause equipment problems and affect work efficiency. So we&#;re using  No matter what type of slurry pump you need, Ritter pump will provide you with the highest quality slurry pump products; The latest development of submersible slurry pump technology in recent years The diving depth has increased from meters to meters!   When the power supply voltage is too low, because the pump is also widely used in many rural watering. In this case, it may be lower than the rated voltage, so the current in the stator winding will also be


    DilijanSmall deep well pumpWhat are the new highlights of the work



      Where ρ—— Density of transmission medium liquid (kg/m; γ—— Gravity of medium liquid (n/m; H -- pump lift (m); Q - water pump flow (m/s); G - gravitational acceleration (m/s.  The difference between the shaft power P and the effective power PE is the power loss in the pump, which is measured by the pump efficiency. The pump efficiency is the ratio of the effective power and the shaft power, which is measured by η Indicates.  This series of slurry pumps are self-developed slurry pump products in China,DilijanVertical heavy-duty slurry pump, with simple structure, belonging to medium and light slurry pumps; ZGB series slurry pump, which can be used in series; When SP and ZJL series work, some pump bodies can  Second, the service life of the flow passage parts of the pump is relatively long, saving production costs.Test results,  Second, the power used is not matched, so the motor temperature will be too high after long-term overload operation; In addition, frequent startup during use will also lead to fever, the pumps I am going to talk about here have a wide range of uses. Pumps are required for both civil and military purposes, as well as for advanced technologies, especially in the mining, chemical,DilijanDeep well submersible pump, it is necessary to select one that matches its power and speed. In addition, the cooling fan should be installed on the main shaft. It is also possible to appropriately increase the number of fan blades, but pay attention to adjusting the vacuum pump


    DilijanSmall deep well pumpWhat are the new highlights of the work



      The motor is scrapped. Moreover, because the length of the long shaft is generally fixed, the installation and use of the pump is troublesome and the application occasions are subject to many restrictions.quality standard, it will certainly do more work. If it sends less water  If the pump outputs more medium liquid, it will certainly do less work, and the current will be correspondingly reduced. Pump power (kw) = head (m) × Flow (m/s) × The gravity of the fluid (kg/m for water) divided by (power conversion factor) divided by the efficiency of the pump (about  In fact, it is easy to distinguish whether a submersible sewage pump is a submersible pump or a sewage pump. A submersible sewage pump is both a submersible pump and a sewage pump, because it is designed to pump sewage or other media. Its usage is to use it in water. Both names are acceptable. When  At present, mechanical seals occupy an increasing share in the slurry pump seal market.Dilijan,  Auxiliary mixing or spraying device shall be equipped for easier operation. When the motor is submerged, there is no need to build complex ground protection and fixed devices, and the management is easier. The mixing impeller directly contacts the deposition surface and controls the concentration through the diving depth, so the concentration control is more free. Equipment directly submerged  The higher the specific speed of submersible slurry pump, the smaller the allowable cutting amount of impeller diameter. In addition to the sealing effect, the auxiliary impeller of the submersible slurry pump can also reduce the axial force.  The submersible slurry pump is developed to adapt to the increasingly complex working conditions and facilitate the use of users. Its use mode is more flexible. The equipment has advanced structure, wide flow passage, strong sewage discharge capacity, excellent material selection and strong corrosion resistance. Suitable for conveying liquids containing solid particles, such as sandstone cinder and tailings. So what are the requirements for its work? Let&#;s understand briefly.

    7An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  11. Ann BenSubmersible non clogging slurry pumpEarly maintenance of

      No matter what type of slurry pump you need, Ritter pump will provide you with high-quality slurry pump products; New progress in submersible slurry pump technology in recent years The diving depth has increased from meters to meters!  The purpose is to avoid water leakage of the pump, but the water seal may be damaged due to faults after being used for a period of time. Let&#;s learn how to replace the water seal.Ann Ben,  If there is no liquid in the cavity of the self-priming centrifugal pump of the submersible sewage pump, the gas-liquid foam mixture cannot be formed and the air cannot be pumped. In order to ensure the speed and reliability of air extraction, sufficient liquid should be filled in the pump cavity before starting. What time would you like   Then replace the pulley and pump cover plate and tighten the fixing nuts.Helsingborg,  During normal operation, the temperature of the motor is very high,Ann BenBooster pipeline pump, some even as high as ℃. In this case, it is easy to burn the motor and replace it with a new one. In fact, or  Promote the continuous expansion of the sales network group.   If the hot water within ℃ is recommended, the hot water pump must be used, and the external tap water shall be connected for cooling during operation, otherwise the motor will not be burned due to too high medium temperature.


    Ann BenSubmersible non clogging slurry pumpEarly maintenance of



       When the power supply voltage is too low, the pump will be overloaded, it may be lower than the rated voltage, so the current in the stator winding will also be  And has a wide range of applications.   Then reinstall the equipment on the engine and install the rubber hose.Pursuit of excellence,  Generally, the diving depth of the submersible slurry pump is not more than meters and the operation is reliable. Why not more than meters? This is the crucial technical point of the submersible slurry pump,Ann BenHH slurry pump,Ann BenWQ submersible sewage pump, because the current sealing technology in China is more than meters, not because the slurry pump has a problem, but because   confirm whether the pressure capacity of the pipeline meets the requirements, and conduct hydrostatic test if necessary.  Rate loss so shaft power = effective power + lost power.


    Ann BenSubmersible non clogging slurry pumpEarly maintenance of



       confirm whether the pressure capacity of the pipeline meets the requirements, and conduct hydrostatic test if necessary.Good reputation,  After that, before starting again, check whether the impeller rolling is normal and whether the bearing assembly compression bolts are tightened, and then start the pump.   Check the suction pipe and bottom valve to see if there is any air leakage source. Remove the silt and other obstructions at the water inlet. Check the water inlet depth of the bottom valve to ensure that it is not less than times the diameter of the water inlet pipe. If it is not enough, deepen the water inlet depth of the bottom valve.   in addition, the noise method directly detects the noise of the equipment in the detection process, but such measurement will also be affected by the surrounding noise, so in fact, such measurement is not very accurate.Ann Ben,  It, generator and market formed at the beginning of construction have gradually formed a certain scale after more than ten years of rapid development. In the early stage, in order to meet the needs of market development generators and other mechanical and electrical products were collectively moved to the phase II market for operation. With a good business environment, that is, the traditional slurry pump cannot be installed and operated, and the submersible slurry pump can supplement this part of the blank work point.  Therefore, the stator winding will be burnt out due to excessive temperature rise.

    8An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  12. sevan Booster pipeline pumpWhat about wrinkling in the production process

       First of all, we need to choose equipment with formal certificates when making choices. We must avoid buying some obsolete or inferior products. And sometimes when the pump is in use, multiple pumps need to be used in parallel or standby pumps need to be prepared.  Through the introduction, we learned that the submersible slurry pump can be used to transport slurry when it is used at ordinary times. The relationship between its special structure is very close, but in fact, it also needs to be used in a correct way when it is used at ordinary times. Only in this way cansevan ,  However, with the increase of pump operation time, it is bound to be accompanied by the decrease of pump efficiency and the wear of flow passage components. The most serious parameter affecting the pump characteristic curve is the wear of the pump impeller. After the wear of the impeller it is equivalent to the downward movement of the pump H-Q curve,sevan HH slurry pump, which reduces the flow and head  Occurrence of personal injury accident. The slurry pump is mainly used to transport water or similar media when in use. It can also be regarded as a common pump in our life,   selection of pump head: generally, the pump head shall be determined by enlarging the margin of % - %.  Head refers to the energy obtained from the pump by the unit weight of liquid output by the pump, so head refers to the effective energy obtained from the liquid output by the pump in unit time - that is, the effective power of the pump: the equation is PE= ρ GQH (W)= γ QH (W)  Under the action of auxiliary devices, it can transport the slurry, and because the sealing device itself is special, it can also ensure the internal and external balance of the submersible slurry pump during transportation, so that the pressure at both ends of the equipment can be balanced during normal use


    sevan Booster pipeline pumpWhat about wrinkling in the production process



       important parts shall be marked in advance to avoid errors during resetting. The joint surface and vulnerable parts shall be properly kept to prevent damage.  The fire control cabinet adopts centralized management and one key operation. The startup procedure is simple and convenient. It can control multiple fire pumps at the same time, greatly providing work efficiency.  What should be paid attention to in the process? Let&#;s learn about the precautions for using the submersible slurry pump. When the equipment is in use, the pump itself generally needs to be placed on land for use, but its suction pipe needs to be placed in waterPotential development   Impeller protection in order to ensure the operation of the submersible slurry pump, it is necessary to timely adjust the clearance between the impeller and the front guard plate. When adjusting the impeller clearance, first stop the pump, loosen the bolts pressing the bearing box, loosen the adjusting nuts,sevan Sewage pump diving, make the bearing components move forward, and roll the shaft by hand to press the  The pump should be divided into two aspects: electricity and machinery. As for machinery, you can compare the previous maintenance records. The second is electricity. You should know the power of each pump motor and have a certain understanding of its control system. Slurry pump with mechanical seal  Head refers to the energy obtained from the pump by the unit weight of liquid output by the pump, so head refers to the effective energy obtained from the liquid output by the pump in unit time - that is, the effective power of the pump: the equation is PE= ρ GQH (W)= γ QH (W)


    sevan Booster pipeline pumpWhat about wrinkling in the production process



       one method is to use ultrasonic method to detect whether the equipment has cavitation. This method is often convenient for re detection. Even if there is some noise in the surrounding environment, it will not affect the detection results. Therefore, many pumps tend to have better measurement results when in use.wholesaler,sevan Wear resistant slurry pump,  With water, you can start working.   others  For example, in the market, for example, the sweeping pump, some of which have a depth of more than meters, it is not suitable to use a vertical slurry pump under such a working condition, but it is extremely easy to use a submersible slurry pump.sevan ,  There is a difference between submersible slurry pump and sewage pump. Although the media conveyed by the two are not pure water and other media, the difference between slag slurry and sewage is still large. Let&#;s take a look at the difference between the two.  Moreover, the leaked flammable, explosive and toxic liquid will cause fire, explosion and poisoning, and the consequences will be unimaginable.  When the water pump is driven by electricity or diesel engine, its impeller (like an electric fan) rotates wildly, thus forming a vacuum in the impeller. In this way, from a al point of view

    9An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  13. ZhanbeiCarbon steel explosion-proof pipeline pumpCarry out skills training in high-risk industries

      After the submersible slurry pump adds a water gun to the support at the bottom of the submersible slurry pump, the hardened mud layer around the slurry pump will collapse rapidly under the applied water pressure, which will also increase the sand pumping area. This will also increase the sand pumping area, so there will be no buried pump when it is used. However,  Flexibility. The equipment has advanced structure, wide flow passage, strong sewage discharge capacity, excellent material selection and strong corrosion resistance. It is suitable for conveying liquids containing solid particles, such as sandstone,   WQ series can be equipped with double guide rail automatic coupling installation system according to the needs of users, which brings greater convenience to installation and maintenance, and people do not have to enter the sewage pit for this purpose.  Third, the whole industrial and mining system operates stably, and the operation of the pump will not affect the work of the whole industrial and mining system.Mila,  What is the solution to this situation?  The premise of using this method is that the water gun must have sufficient flow during use, otherwise the effect of the submersible slurry pump may not be obvious.   The standby submersible slurry pump shall roll the shaft / turn every week to make the bearing uniformly accept the static load and external oscillation. The building structure in the water pump room shall be reconstructed. Sound absorbing and isolating plates shall be installed around the wall and on the top of the machine room and fixed with light steel keel; The connecting holes between the machine room and other rooms are tightly blocked,


    ZhanbeiCarbon steel explosion-proof pipeline pumpCarry out skills training in high-risk industries



      What should be paid attention to in the process? Let&#;s learn about the precautions for using the submersible slurry pump. When the equipment is in use the pump itself generally needs to be placed on land for use, but its suction pipe needs to be placed in water  Submersible slurry pump Absorb silt and sand from rivers, lakes, oceans, reservoirs, fish ponds and power plants.  With water,  Submersible pump is a common water lifting equipment for deep wells. During operation, the whole machine intrudes into the water to extract water from the underground to the surface. It is commonly used for domestic water, mine rescue industrial cooling, farmland irrigation, seawater lifting, ship load adjustment, landscape fountains, etc. Submersible pump is generally divided into clean water submersible  When the pump is not in use, the pump shall be lifted away from the water source in time to drain the accumulated water in the pump, especially in cold winter. Then put it in a dry place. Conditional users can also apply oil to the key parts of the water pump and add lubricating oil to the bearing to prevent parts from rusting. in addition   When adding lubricating oil to the pump at ordinary times, the metering must be controlled, because there will be some difference between the marked head when using and the head when using. This is because the pipe itselfHonest management, and the operation is simpler. The equipment is directly submerged for operation, without noise and vibration, and the site is cleaner.  Slide until the active coupling is in place. When mobile equipment is selected, the hose shall be sleeved first, and the chain cable shall be threaded into two lifting rings to lift the electric pump up and down. Be careful not to use the cable as a rope to avoid danger.  As a submersible slurry pump widely used in many fields, it has the advantages of simple structure, convenient disassembly and maintenance, and convenient installation and use. The change of the sealing structure of the pump avoids the direct damage to the bearing after the mechanical seal is damaged, and the service life of the bearing has also been greatly changed.Zhanbei,  The above is the correct sequence of impeller disassembly of submersible slurry pump. Because different types of pumps have some differences in structure, we also need to refer to the instructions when disassembling.  Rotate in the rolling direction until the friction between the impeller and the front guard plate stops, then use the adjusting bolt to move the rotor backward, record the forward and backward movement gap, evenly distribute it between the front and rear guard plates of the impeller until the gap between the impeller the front guard plate and the rear guard plate is flat, stop,ZhanbeiCentrifugal slurry pump, and tighten the two dust discs and fasten them on the shaft. adjustment  When the water pump is driven by electricity or diesel engine, its impeller (like an electric fan) rotates wildly, thus forming a vacuum in the impeller. In this way,ZhanbeiVortex pump and pipeline pump, the atmospheric pressure will move the water pressure to pump water. In fact, from a al point of view, it is to convert electrical or chemical energy into gravity

    9An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  14. AshtarakQuotation slurry pumpProblems needing attention in season use

       It may also be because the pump&#;s liquid supply pipe is blocked by other substances during normal use.   confirm whether the pressure capacity of the pipeline meets the requirements, and conduct hydrostatic test if necessary.Ashtarak,AshtarakAh slurry pump,  Consider the vertical separation level of the tail equipment. The water pump control cabinet has a variety of protection s and complete status display, such as overload, short circuit, phase loss protection, pump body water leakage, motor over temperature and electric leakage, as well as single pump and multi pump control working modes, and the maintenance frequency has been reduced, the cost has been reduced, and the income has been increased.Vryburg,   When the slurry pump fails to absorb water during operation,AshtarakWear resistant slurry pump, it may also be because the bottom valve is not opened. At this time it is necessary to check whether the bottom valve is open and make corresponding adjustment.   If the impeller of the pump is damaged after a long time of use, it will also lead to insufficient liquid supply for the pump.  The whole packing body, including the packing gland, shaft sleeve needs to be disassembled; Submersible slurry pump Disassemble the o-seal ring, and then the discharge section includes the last stage guide vane


    AshtarakQuotation slurry pumpProblems needing attention in season use



      If there is a standby pump, it is better to use two pumps in turn. If the pump is stuck, the pump can only be repaired. A net can be added at the water inlet to prevent too many impurities from entering the pump. In this way, the probability of pump sticking will be much smaller!  Huanya pump - long shaft deep well pump  The utility and durability of the utility model, so the polymer composite materials are generally used in production.Good quality,  If the water leakage is serious, the broken pipe shall be dismantled and replaced. Lower the lift and press the nozzle of the water pump into the water for .m.  Moreover, because the length of the long shaft is generally fixed, it is often troublesome to install it. Therefore, when it is used later, the place where it operates will also be limited. If the equipment will   If the head of the submersible slurry pump is too low or the head is higher than the practical condition, the flow will be large and the current will rise. At this time, the outlet valve can be turned down to increase the resistance to control the current.


    AshtarakQuotation slurry pumpProblems needing attention in season use



       The pump body (can not) bear the pressure from the outlet pipeline system. The standby pump in the warehouse should rotate (/ times a week to make the shaft bear the load and external vibration evenly. The belt CR drive is that the motor is on the (right) side of the pump from the inlet of the pump.Create brilliance,  When the equipment is in use, the water delivered in the pump receives the friction with the surface of the pump impeller, so the pump needs to consume more energy to reduce the friction and resistance caused by the surface when it is rotating. Water will slowly overcome it as it flows  Ensure that the power supply voltage is adjusted to the standard power supply to solve the problem.  In addition to the main impeller inside the equipment, a set of impeller for mixing will be added at the bottom of the equipment, so that some mortar slowly settled inside the equipment can be mixed with water to become a flowing medium, so that the equipment can be used without itsAshtarak,  Limited. According to relevant materials the diameter of the impeller after cutting shall not be less than % of the diameter of the standard impeller, otherwise the of the pump will have a very adverse change. After the impeller of the slurry pump is cut, the flow area in the pump body increases, which makes the flow increase after the impeller is cut.   When adding lubricating oil to the pump at ordinary times, the metering must be controlled, and the excess lubricating oil in the pump must be discharged and replaced regularly.   Cutting blades can be selected to cut some large block solid substances into pieces during use, so that blockage can be avoided during reuse.

    10An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  15. PontianakVertical multistage centrifugal pipeline pumpWelcome to contact

      The installation of submersible slurry pump is a step that needs to be concerned. Since we all care about it, it is mainly because the installation will directly affect the use effect. The installation work should be seamless. Some key operating points can be seen when installing the slurry pump.  The above is a brief introduction to the effect and form of shaft seal of submersible slurry pump. Users can choose the appropriate shaft seal type according to their actual needs.Pontianak, the discharge valve must be opened to start the self-priming pump, so that the gas can be discharged from the discharge port. Secondly, there should be enough liquid in the cavity of the self-priming pump, otherwise it will not   Then reinstall the equipment on the engine and install the rubber hose.Villa Mercedes,  When using the sand pump, be sure to pay attention to the steering divergence between the motor and the pump. The sand pump has an arrow on the pump to mark the main steering. After the power supply is connected,PontianakPipeline pump, run the pump without load. Check whether the motor operates normally. During operation,PontianakLong shaft submerged slurry pump, be careful not to exceed the bearing on the pump support to avoid  If the pump outputs more medium liquid, it will certainly do more work. If it sends less water, it will certainly do less work, and the current will be correspondingly reduced. Pump power (kw) = head (m) × Flow (m/s) × The gravity of the fluid (kg/m for water) divided by (power conversion factor) divided by the efficiency of the pump (about   install the front pump shaft first and then the rear bearing for the slurry pump of the filter press of the cylindrical bearing box.


    PontianakVertical multistage centrifugal pipeline pumpWelcome to contact



      In fact when the submersible slurry pump is blocked during use, it will not only have a certain impact on the working efficiency of the equipment during operation, but also cause serious damage to the equipment itself, the hardened mud layer around the slurry pump will collapse rapidly under the applied water pressure, which will also increase the sand pumping area. This will also increase the sand pumping area, so there will be no buried pump when it is used. However,original,  Be sure to choose a pump that is more suitable for use.  Vertical slurry pump is an early product. Submersible slurry pump is a new product developed with the improvement of social demand and operating environment.  The type selection design of submersible slurry pump has a great impact on the service life and operation stability of slurry pump. A scientific and reasonable model selection design will affect whether your slurry pump can achieve the best efficient operation.


    PontianakVertical multistage centrifugal pipeline pumpWelcome to contact



      It is not correct that it has no effect on us.Safety and health,  It is located in the middle, so it seems that many regions have good effects when using it.  At this time it is necessary to use the fire control cabinet. The fire control cabinet can control multiple water pumps to ensure the normal operation of the fire pumps.  Work, no noise and vibration,PontianakSubmersible slurry pump, and the site is cleaner.Pontianak,  Whether it is the pre installation inspection or the post installation commissioning inspection, the correct operating procedures must be strictly followed. Only the correct operating steps can make the product play an effective role in the use site.   Dust and oil stains on the motor reduce the heat dissipation capacity of the equipment and cause the equipment temperature to rise.   Moreover, the processes of these two pumps are also different, and the sewage pump can generally be adjusted. Submersible pumps are generally used in some special or other places.

    11An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  16. SimaxiSplit vertical pipeline pumpQuality assurance

      Extend service life. In fact the submersible slurry pump is widely used in many lives, and there is a very important component water seal in the pump, which can separate the pump body from the motor, so it mainly plays a role in use   First remove the pump from the engine.Simaxi,  Test the steering first, and then connect the motor to the ash pump. There is a removal ring at the journal. This device can prevent the impeller from reversing.  Function of shaft seal of submersible slurry pump: the main of shaft seal is to prevent high-pressure liquid from leaking out of the pump and prevent air from entering the pump.Su-ngai Kolok,  The use of water pumps for agricultural drainage and irrigation can improve the ability of agriculture to resist natural disasters, increase production and ensure income, and provide material conditions for agricultural mechanization and water conservancy.  ; In practical application, while the submersible slurry pump can be used directly without immersion, which is convenient and flexible.  It needs to be replaced in case of damage, swelling and deformation, insufficient spring pressure, breakage, etc.


    SimaxiSplit vertical pipeline pumpQuality assurance



      Wheel, mixing impeller and other main flow passage parts are made of high wear-resistant raw materials, which are wear-resistant, corrosion-resistant, non clogging, and have strong sewage discharge capacity, and can effectively pass through large solid particles. It is not limited by suction range, with high slag suction efficiency and more complete desilting. There is no need to equip auxiliary vacuum pump, we need to remove the impeller removal ring first we only need to fix the pump shaft and rotate the impeller in reverse to remove the impeller easily. For large pumps with impeller removal ring, and then rotate the impeller.  Compared with the vertical slurry pump,SimaxiVertical multistage centrifugal pipeline pump, the submersible slurry pump can also be used as a mobile slurry pump, such as sand pumping on board, prospecting, etc; Submersible slurry pump assembly workshop III. what are the advantages of submersible slurry pumpQuality documents,  The higher the specific speed of submersible slurry pump, the smaller the allowable cutting amount of impeller diameter. In addition to the sealing effect,SimaxiQuotation slurry pump, the auxiliary impeller of the submersible slurry pump can also reduce the axial force.  Moreover, because the length of the long shaft is generally fixed, it is often troublesome to install it. Therefore, when it is used later, the place where it operates will also be limited. If the equipment will   for screws that are too tight or rusted for a long time, the nut can be lubricated with kerosene prepared in advance, or the nut can be gently knocked with a wooden hammer and then removed. This method can also be used in slurry pumps and other places.


    SimaxiSplit vertical pipeline pumpQuality assurance



      Generally speaking, the above two cases are the case that the slurry pump does not absorb water. The solutions are also introduced. I believe that people can deal with this problem in time. However, if the problem is serious, you must not adjust it at will. At this time, you should find a professionalClick to view,  The operating environment is different: the key difference between the submersible slurry pump and the vertical slurry pump lies in diving. During the operation of the vertical slurry pump some parts intrude into the pit and cannot completely invade the slurry; The submersible slurry pump can completely penetrate below the slurry level.   The reasons for excessive power loss are as follows: the running speed of the screw rod is too high.  The development of submersible slurry pump is to adapt to increasingly complex working conditions, facilitate users to use, and its use mode is more flexible. And it fills a part of the gap in the application of slurry pump. When the submergence depth is deep and there is no better slurry outlet, that is, in the traditional slurry pumpSimaxi,  Then it can enter into the volute pump housing. Then in the volute pump casing, the medium slows down because the flow channel is also gradually expanding.  The operating environment is different: the key difference between the submersible slurry pump and the vertical slurry pump lies in diving. During the operation of the vertical slurry pump,SimaxiBooster pipeline pump, some parts intrude into the pit and cannot completely invade the slurry; The submersible slurry pump can completely penetrate below the slurry level.  After the submersible slurry pump leaves the factory, there is generally only outgoing cable, and the user needs to connect it separately during installation. If the connection is wrong, it will seriously affect the normal operation of the pump, so we should follow the correct steps to connect.

    12An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  17. MathisBaigang deep well pumpThe qualitative effect of strengthening phase is played

      Carbon, building materials chemical industry and other industrial industries are mainly used to transport abrasive pastes containing solid particles.   First, screw down the bolts on the side bearing pressure cap, and then remove the nuts used for the connection between the three parts: discharge section, stuffing box body and bearing body; Then screw off the round nut on the shaft,MathisCorrosive pipeline pump, and successively install the bearing inner race,MathisSewage pump diving, bearing gland and retaining sleeveMathis,  The treatment method is as follows: first, check the circuit voltage to reduce the speed of the water pump.  The purpose is to avoid water leakage of the pump, but the water seal may be damaged due to faults after being used for a period of time. Let&#;s learn how to replace the water seal.Pirot,  In addition, the sundries inside the pump body and impeller shall be cleaned. Then calibrate the pump shaft and motor shaft of the slurry pump to make them on the same horizontal line.   Move the sand pumping site frequently. When the pump pumps sand at a fixed position and drops to a certain height, lift the submersible slurry pump and move it to the adjacent position of the previous sand pumping place to continue pumping sand, so as to move the sand pumping place back and forth for sand pumping, so that the sand pumping area in this area forms a honeycomb,   If the hot water within ℃ is recommended, the hot water pump must be used, and the external tap water shall be connected for cooling during operation, otherwise the motor will not be burned due to too high medium temperature.


    MathisBaigang deep well pumpThe qualitative effect of strengthening phase is played



      When the submersible slurry pump works, the pump needs to be placed on land, and the pump needs to be started. Due to special structural requirements, when the slurry pump motor is submerged in the water, the slurry pump and submerged slurry circulating pump need to be placed above the water surface, so they need to be fixed, otherwise the motor will fall into the water  At this time, it is necessary to use the fire control cabinet. The fire control cabinet can control multiple water pumps to ensure the normal operation of the fire pumps.  When the water pump is driven by electricity or diesel engine, its impeller (like an electric fan) rotates wildly, thus forming a vacuum in the impeller. In this way, the atmospheric pressure will move the water pressure to pump water. In fact, from a al point of view it is to convert electrical or chemical energy into gravitynew product,  There will be no insufficient liquid supply or other problems.  It is located in the middle, so it seems that many regions have good effects when using it.   the front and rear bearing glands are equipped with oil seals, which are padded with green paper or asbestos. There is a gap of .- mm between the rear gland and the bearing.


    MathisBaigang deep well pumpThe qualitative effect of strengthening phase is played



      What stands out is the sealing of the container. The seal is easy to install and maintain, stable and reliable, but the price is quite expensive.where  Different process requirements: the motor used in the vertical slurry pump is an ordinary vertical motor, which has no waterproof . The motor of the submersible slurry pump and the pump shaft are coaxial. The motor shall be waterproof and sealed. The motor and the pump body can invade underwater at the same time.   When the electric pump is not in use, take it out of the water and do not immerse it in the water for a long time, so as to reduce the chance of the motor stator winding getting damp and increase the service life of the electric pump. When the temperature is low, the pump needs to be lifted out to prevent freezing.  The submersible slurry pump is a kind of submersible pump which is connected with the motor and works underwater at the same time. In addition, compared with horizontal slurry pump and vertical slurry pump, and is more suitable for various working conditions. The important technical points of submersible slurry pump are its motor andMathis,  Cavitation of the pump is caused by water evaporation of the pump. The main cause of water evaporation is related to temperature and pressure. Under a certain pressure, when the temperature rises to a certain value, at a certain temperature, the pressure drops to   selection of flow: single suction pump or double suction pump shall be selected according to the flow; single suction pump or multi suction pump shall be selected according to the lift.  Ordinary vertical motor can be used without waterproof, while the motor shaft and pump shaft of submersible slurry pump are coaxial, so the motor must be waterproof and sealed, and the motor and pump can be immersed in liquid at the same time; The vertical slurry pump is an early product, and the submersible slurry pump is a newly developed product according to the market demand

    12An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  18. GorisWater well pipeline pumpWhere can we see the current status

      It, generator and market formed at the beginning of construction have gradually formed a certain scale after more than ten years of rapid development. In the early stage,GorisCentrifugal slurry pump, in order to meet the needs of market development, generators and other mechanical and electrical products were collectively moved to the phase II market for operation. With a good business environment, some parts intrude into the pit and cannot completely invade the slurry; The submersible slurry pump can completely penetrate below the slurry level.Goris,  Submersible sewage pumps are classified as one kind of centrifugal impurities and have many forms: such as submersible and dry-type. At present, the commonly used submersible sewage pumps are WQ submersible sewage pumps, and the common dry-type sewage pumps are W-type horizontal sewage pumps and WL type vertical sewage pumps. It is mainly used to transport urban sewage and feces  If the oil seal ring of the shaft is seriously worn, replace it with a new one.Khartoum ,  The slurry pump of underground pump can also work normally.  ; In practical application, the submersible slurry pump is developing rapidly with its unique advantages. The vertical slurry pump needs to be fixed and installed in use, while the submersible slurry pump can be used directly without immersion, which is convenient and flexible.  The utility and durability of the utility model, so the polymer composite materials are generally used in production.


    GorisWater well pipeline pumpWhere can we see the current status



       The fan speed of the water pump is too low, and the air pressure and air volume are relatively small, so the heat cannot be dissipated.  The following inspection shall be carried out: whether there are sundries between the impeller and the pump body due to too tight packing.  Whether the pump is evacuated or overflowed, etc., and handle it at any time.Quality risk,   In addition, the use of ° and S-shaped bends should be reduced as much as possible during the installation and design of pipelines.  The installation of submersible slurry pump is a step that needs to be concerned. Since we all care about it,  First, the reason for the motor body: the wrong connection will make the temperature rise rapidly when the equipment is used; In addition, there may be some phase to phase short circuits between stator windings, so when the situation is relatively minor the motor is only in local places  At present, all screw pump manufacturers regard dry operation protection as a necessary unit for equipment procurement.  What is the cause of pump overload.Goris,   If the head of the submersible slurry pump is too low or the head is higher than the practical condition, the flow will be large and the current will rise. At this time, the outlet valve can be turned down to increase the resistance to control the current.  Start the priming pump. Moreover, due to the structural limitations of the submersible slurry pump, the motor needs to be placed on the water surface for use during operation, and then the pump needs to be placed in the water for use. Therefore, the submersible slurry pump must be  The production department has to spend a lot of money to maintain and update the pump every year. The pumps made of cast iron,GorisCarbon steel explosion-proof pipeline pump, rubber lining stainless steel, titanium alloy and other materials used in China&#;s mining, chemical and water conservancy projects on the Yellow River are prone to wear, short service life and many faults

    14An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  19. GavalISG single stage vertical pipeline pumpPoor fire resistance
    the submersible slurry pump has many advantages

      What is the solution to this situation?  As an emerging product, especially filling the gap in the application conditions of the traditional horizontal and vertical slurry pumps. At present,GavalCarbon steel explosion-proof pipeline pump, the application of the submersible slurry pump is gradually becoming more and more widespread, and the market recognition is continuously improving, the depth can reach meters.Gaval,  Then start the spray pump. It is specially used for control equipment such as fire fighting, sprinkler and water curtain in high-rise and low-rise industrial and civil buildings. It is also suitable for restaurants, warehouses, underground garages and other places. The ordinary sprinkler head can be directly installed or hung on the sprinkler pipe network  About %), and motor power p=i × U indicates that high power and current will increase.Lublin,  It needs to be replaced in case of damage,GavalWear resistant slurry pump, swelling and deformation,GavalVertical slurry pump, insufficient spring pressure, breakage, etc.  Line direction pay attention to the direction of rotation. Then loosen the original compression nut of the bearing box of the slurry pump of the submersible pump, tighten the adjusting screw of the bearing box evenly, When δ= A (. ~ mm  There is no need to equip auxiliary mixing or spraying equipment, and the operation is simpler. The equipment is directly submerged for operation, without noise and vibration and the site is cleaner.


    GavalISG single stage vertical pipeline pumpPoor fire resistance



      Head refers to the energy obtained from the pump by the unit weight of liquid output by the pump, so head refers to the effective energy obtained from the liquid output by the pump in unit time - that is, the effective power of the pump: the equation is PE= ρ GQH (W)= γ QH (W)  Submersible sewage pumps are classified as one kind of centrifugal impurities and have many forms: such as submersible and dry-type. At present, the commonly used submersible sewage pumps are WQ submersible sewage pumps, and the common dry-type sewage pumps are W-type horizontal sewage pumps and WL type vertical sewage pumps. It is mainly used to transport urban sewage and feces   The submersible slurry pump usually relies on water cooling to dissipate heat. If the motor leaks out of the water without water cooling the motor temperature will rise, so it is easy to burn out the motor.Meticulous workmanship,   When adding lubricating oil to the pump at ordinary times, the metering must be controlled, and the excess lubricating oil in the pump must be discharged and replaced regularly.  In the mud pump, the axial force is mainly composed of the pressure difference force of the liquid effect on the impeller and the gravity of the whole rolling part. The effect direction of the two forces is the same, and the resultant force is the sum of the two forces. If the submersible slurry pump is equipped with an auxiliary impeller, the liquid effect is on the auxiliary impeller  Moreover, the leaked flammable, explosive and toxic liquid will cause fire, explosion and poisoning, and the consequences will be unimaginable.


    GavalISG single stage vertical pipeline pumpPoor fire resistance



      Therefore, the correct selection of shaft seal can ensure the safe and stable operation of slurry pump.Free consultation,  All kinds of newly designed mechanical seals of submersible slurry pumps contribute greatly to the growth of market share.   The variable speed operation of screw pump is used in sewage plants. Screw pump is generally used together with sludge dehydrator. Whether it is to transport sludge to be treated or flocculant, it has strict control on the flow of transmission medium.  The direction of the differential pressure force is opposite, which can offset part of the axial force and prolong the service life of the bearing.Gaval,   important parts shall be marked in advance to avoid errors during resetting. The joint surface and vulnerable parts shall be properly kept to prevent damage.  Carbon, building materials, chemical industry and other industrial industries are mainly used to transport abrasive pastes containing solid particles.   First remove the pump from the engine.

    16An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  20. ARATSubmersible sewage pumpLet’s talk about the seven characteristics of

      In addition to the main impeller inside the equipment, a set of impeller for mixing will be added at the bottom of the equipment, so that the equipment can be used without its  For example, concentrate and tailings are treated in the concentrator, ash and slag are removed from the power plant,ARATWQ submersible pump parameters, slime and dense medium coal are transported in the coal preparation plant, and slurry is transported in coastal river mining operations. The weight concentration of the treated slurry is: mortar %, ore slurry %; It can be operated in series according to the needs of users.ARAT,  The submersible sewage pump is mainly used to ensure various sewage pump products containing solid particles or other impurities. Because it works in water, we call it a submersible sewage pump,ARATVertical non clogging sewage pump, and the model selection of the submersible sewage pump is often determined according to the parameter information such as the nature and working characteristics of the sewage pump station.   Before starting the submersible slurry pump, the rotor of the rotating pump shall be smooth and even, the outlet sluice valve shall be closed and water shall be injected into the pump to ensure that the pump is full of water without air.Yopal,  Yes, the pump will not be filled with water. When this happens again, technicians need to properly adjust the liquid level in the pump sump to a proper height, and check the impeller. In case of damage or aging, it needs to be replaced in time,  Ensure that the service time will be extended when it is used. We all know that the submersible slurry pump needs to optimize its structure to meet the requirements of use because the medium it transports is relatively special. The structure has been optimized to


    ARATSubmersible sewage pumpLet’s talk about the seven characteristics of



       First of all, we need to choose equipment with formal certificates when making choices. We must avoid buying some obsolete or inferior products. And sometimes when the pump is in use, multiple pumps need to be used in parallel or standby pumps need to be prepared.  If there is a gap in the actual work, if the pipeline can not absorb water normally, it is necessary to find out whether the model of the pipeline pump can have the self-priming , and then check the cause of the abnormal suction range of the pipeline pump and solve it.  How to avoid this situation when the equipment is in use.recommend,   Why does the demand for submersible slurry pumps increase greatly? From the perspective of market demand, although the number of submersible slurry pumps has not exceeded that of vertical slurry pumps, it has a rapid development momentum. The main reason is that the above-mentioned use is convenient and flexible; In addition, the application market of submersible slurry pump is also better than that of vertical pump  How to disassemble the submersible slurry pump and how to assemble it after disassembly. The technical points and precautions for disassembly will be introduced to avoid disassembly, pump damage and disassembly.   confirm whether the pressure capacity of the pipeline meets the requirements, and conduct hydrostatic test if necessary.


    ARATSubmersible sewage pumpLet’s talk about the seven characteristics of



       Then tighten the compression nut on the packing gland evenly to make the liquid leak out in drops, and pay attention to the temperature rise outside the packing chamber.Sincere service,  The development of submersible slurry pump is to adapt to increasingly complex working conditions, facilitate users to use, and its use mode is more flexible. And it fills a part of the gap in the application of slurry pump. When the submergence depth is deep and there is no better slurry outlet, that is, in the traditional slurry pump  It is not allowed to operate the electric pump under the condition of low lift for a long time (generally, the operating lift shall not be less than % of the rated lift), which shall be controlled within the recommended operating lift plan as far as possible to prevent the electric pump from burning out the motor due to overload. Pumps without self circulating cooling equipment prevent all of them from being exposed to the water for a long time  At the same time the supporting pipelines in the pump room shall be provided with vibration isolation elasticity.ARAT,  In the mud pump, the axial force is mainly composed of the pressure difference force of the liquid effect on the impeller and the gravity of the whole rolling part. The effect direction of the two forces is the same, the liquid effect is on the auxiliary impeller  Occurrence of personal injury accident. The slurry pump is mainly used to transport water or similar media when in use. It can also be regarded as a common pump in our life,ARATSubmersible sewage pump, but it will also be overloaded when in use. Let&#;s have a look today  Causes: there is air or gas accumulation in the water inlet pipe of the pump, or the bottom valve is not closed tightly, the water supply is not satisfied, the packing of the vacuum pump leaks seriously and the gate valve or flap valve is not closed tightly.

    18An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites