Regarding the cleanliness of the hydraulic station, the editor will talk about a series of safety devices and their uses on the guide rail hydraulic lifting platform.Barletta ,Good stability: The overflow valve can prevent the system pressure from being too high during upward movement. Emergency manual valve: In case of power failure, the car can be emergency lowered to the nearest floor to open the door. Manual pump: When the system fails, the manual pump can be operated to pump out high-pressure oil to raise the car to the nearest floor; Oil tank oil temperature protection: When the oil temperature in the oil tank exceeds the standard setting value, the oil temperature protection device will send out a signal, Suspend the use of the elevator and start the elevator when the oil temperature drops.Prepare the foundation according to the foundation plan, pay attention to the alignment, leveling,Regular maintenance Regularly check whether the circuit system of the hydraulic lifting platform is loose,Barletta Five ton cargo elevator, and check whether the wires and cables are aging and damaged, which may cause leakage of the line. If there is, it should be repaired in time to avoid electric shock.The hydraulic lifting platform is mainly the pressure transmission of hydraulic oil to realize the lifting function. Its scissor mechanical structure makes the lift stable, and the wide operating platform and high carrying capacity make the high-altitude operation wide and suitable for many people work at the same time. It makes high-altitude operations efficient and secure.This kind of fixed lifting equipment can also be used in the warehouse. For example, the platform is level with the ground, does not occupy the ground space, and does not affect the passageway.It is usually checked whether the various organizations are operating normally and whether there is any noise. If any obstacle is found, it must be eliminated immediately.Test the freight elevator every day to see if the freight elevator can operate normally.Direct material,In addition to the fixed mode, the elevator also has a vehicle-mounted mobile type. As the name implies, it combines the lifting equipment with the vehicle-mounted system. Such a lifting equipment is very flexible to move, and of course it is more useful. For example There is this kind of lifting equipment in the airport, and it is also possible to install this kind of equipment in stations or stadiums. Since it can be moved, the scope of operation is not limited to a certain place, and it can be used wherever lifting operations are required. It can be used. For example, when installing outdoor advertisements, the height of some advertisements is relatively high. At this time mobile lifting equipment can be used to send billboards or staff to the designated height to work. This kind of equipment can also be divided into two types according to the driving mode: hydraulic lifting and electric lifting. The so-called hydraulic lifting is driven by hydraulic oil to reach a specified height. The electric mode is driven by a motor or geared to lift to A certain height, hydraulic lifting platforms are more widely used.Regular maintenance Regularly check whether the circuit system of the hydraulic lifting platform is loose but at present, and check whether the wires and cables are aging and damaged, which may cause leakage of the line. If there is, it should be repaired in time to avoid electric shock.After the goods are transported, clean up the debris on the platform.

The water cooling of the hydraulic station is generally tube-type water cooling, and its type selection is based on the heat load to calculate the heat exchange area, while its air-cooled elevator is carried out by using an air cooler, and it is The heat transfer capacity is calculated according to the heat load, and then the type selection calculation is carried out under the condition that the flow rate can be satisfied. Therefore, these two kinds of cooling are not the same, and there is a big difference. Long-term promotion of freight elevator factories and other,Barletta Fixed simple lifting cargo elevator, Long-term cooperation, mutual benefit and win-win. If you choose the wrong supplier, you will be overwhelmed with all kinds of after-sales troubles in the later stage. Recently, I have seen many netizens report the problem of very loud oil cylinders. Today,Uses: The scissor-type fixed lifting platform is mostly used for the transportation of goods between the height differences of the production line, the loading and unloading of materials, the adjustment of the working height during the assembly of the workpiece the feeding of the installed machine at a high place,Barletta Simple lifting cargo elevator table, the lifting of parts during the assembly of large equipment, and the storage and unloading place and Forklifts and other handling vehicles are used for fast loading and unloading of goods, car lifting, fixed three-dimensional parking and other places.The current floors are all very high, and it is very difficult to climb up from the first floor, let alone hold things. For this reason, people have invented elevators, which can easily reach the floors they want to go to. However, it will be very troublesome if it rains, which will affect the normal operation of the elevator. So what should be done correctly after the elevator enters the water?Precautions for elevator installation Keep the access road of the external construction elevator smooth and have enough parking space for equipment. When it is necessary to use a steam crane for auxiliary installation, it should be fully considered whether the site environment meets the operating conditions of the steam crane.Barletta ,System: explosion-proof electronic control system, remote control system, P IC system.What are the maintenance rules for hydraulic lift machinery? The brakes of each mechanism should be checked frequently and the gap between the brake shoe and the brake wheel should be adjusted to ensure flexibility and reliability. There should be no dirt on the friction surface, and if there is dirt, it must be washed off with gasoline or thinner.Brake operators of various mechanisms on the equipment should regularly check and adjust the gap between the brake shoe and the brake wheel to ensure flexibility and reliability. Long-term promotion of freight elevator factory, old brand, price advantage, quality guaranteed!