Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, and of course the meshing clearance should also be appropriate. If this is not appropriate, ensuring the durability of the tension chain at a high level, ensuring the balance of materials during transportation, and preventing materials from falling off the table. In addition it also brings stronger pump station power to the elevator and can be adjusted according to the actual situation of material transportation, the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear, and of course, the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.Bistrita,Suitable for - story steel structures or concrete workshops, both internal and external.Heavy steel wire rope wheels or heavy-duty specialized chains ensure safety.Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)

There are also some specific situations that are crucial for the selection of lifting platforms. When understanding the electric hydraulic lifting platform equipment, the unpacking acceptance needs to check whether these technical documents are complete, and whether the relevant attachments and other technical documents are complete, which is also a very important selection standard. The operation of the platform and some aspects of selection are crucial, and it is important to consider the situation and characteristics of these brands when making choices.The main actions of a hydraulic cylinder elevator are lifting and lowering, and the main component that affects these two actions is the hydraulic cylinder. When the operation of the hydraulic cylinder is poor, the lifting and lowering actions will also appear sluggish, which leads to a decrease in the efficiency of conveying objects. To avoid a decrease in the efficiency of object transportation, it is necessary to always pay attention to the condition of the hydraulic cylinder and promptly solve problems with the hydraulic cylinder.There are many options for platform selection, and whether it is color or style, these design situations are very important. When selecting aluminum alloy lifting platforms, some key information and specific parameters of the equipment are crucial. When understanding, it is important to pay attention to the characteristics and information of these price increasing platforms through legitimate channels and channels.supply,At present,TevesoFixed elevator cargo elevator, there are more and more manufacturers of lifting equipment in the market, and each manufacturer has different technical strength, configuration functions, quotation prices, etc. After comparison, customers will also have different choices. Among them, there is a high demand for electric elevators in the market. What aspects should customers consider when choosing in the market in order to find a better one to order?The purpose of the curved arm elevator: The curved arm high-altitude work vehicle is widely used for installation, maintenance, and climbing operations in industries such as municipal engineering,Teveso2 meter high movable small lifting platform, electricity, street lighting,TevesoManual small lifting table, advertising, communication, photography, landscaping, transportation, docks, airports and ports, and large industrial and mining enterprises.It can be seen that the hydraulic lifting platform needs to carefully inspect the hydraulic and electrical systems before use, so as to facilitate its use.

The purpose of the curved arm elevator: The curved arm high-altitude work vehicle is widely used for installation maintenance, and climbing operations in industries such as municipal engineering, electricity, street lighting, advertising, communication, photography landscaping, transportation, docks, airports and ports, and large industrial and mining enterprises.Scheme customization,Especially when its pipes are in use, they are quite boring and can roll, so in this case, they need to be blocked or tied tightly. This is relatively appropriate, so it is necessary to pay attention to these details during use. Especially for unmanned protective lifting platforms, it is not allowed to carry people during use, and it is strictly prohibited to carry people. If the electric lifting platform carries people during use, then the lifting platform is equipped with railings or anti crack valves. Its main function is to prevent the oil pipe from breaking or causing its workbench to fail during use and then descend.With the development of electric elevators, there have been various types of mechanical equipment, among which the type widely used in industries is the guide rail type. Nowadays, many mechanical equipment manufacturers in China can produce guide rail type elevators. Enterprises can choose the appropriate elevator based on their own material transportation situation to accelerate the speed of material transportation. So, what are the typical advantages of rail type electric elevators?In this situation, it is necessary to regularly check all wires and cables used to ensure that there is no damage. When there is wrapping or damage, the parts should be replaced in a timely manner. I believe many people have encountered overheating in electric motors. In this case, it is necessary to stop the motor in a timely manner, and then troubleshoot the problem before continuing to use it. This way, the motor shaft can be used and the effect is good.Teveso,Take a look at the configuration parameters. Due to the fact that the quality of electric elevators can be directly seen from the configuration parameters, it is necessary to choose the configuration of two brand manufacturers to formThe oil cylinder is built into the platform.Measures should be taken to improve the after-sales service system. When customers encounter malfunction problems, it is necessary to take time to repair them and ensure that they will not be affected in terms of operation. So, in the process of fixed lifting platforms a complete service system will also be welcomed by customers. When comparing, it is necessary to see that the gap between each other will be significant, and the purchasing standards brought to customers will continue to improve, gaining their recognition and trust.