The main components of the Hunter hydraulic fixed elevator are: . The shaft part is a closed or mesh frame enclosed by buildings or lightweight steel structures, with steel guide rails installed on both sides of the interior. . The driving part is equipped with a hydraulic drive motor, oil pump, and safety valve, A small oil tank for hydraulic components such as speed control valves and directional valves: . The oil cylinder part: It is composed of one or more oil cylinders of the lifting oil cylinder straight top platform or lifting shear fork frame: . The door system part: It is a closed or mesh platform door or landing door system composed of steel structure, with manual and automatic doors. Generally, signal, Composition of safety and lighting devices: Platform parts: It is a steel structure platform that carries heavy objects, with guide rollers or guide shoes installed on both sides. The bottom of the platform can be connected to a lifting oil cylinder or a lifting shear fork shaped steel frame. When we use aluminum alloy elevators, we need to regularly inspect maintain, and maintain them, which can not only extend the service life of the aluminum alloy elevator, Can make it work with greater power! For example, and vulnerable parts must be regularly inspected, repaired, or replaced. Mechanical bolts especially parts that frequently vibrate, such as slewing bearings and lifting arm connecting bolts, should be checked for looseness. If there is looseness, it must be tightened or replaced immediately. Next, let's take a look at the regulations for the maintenance time of aluminum alloy elevators: daily maintenance (carried out per shift).The lifting product has a sturdy structure, large load-bearing capacity, stable lifting simple and convenient installation and maintenance, making it an ideal economic and practical cargo conveying equipment for replacing elevators between low floors. If the required size is large, a fixed double span hydraulic lift can be used. The double span lift is stable, has a large bearing capacity,ShijiazhuangAluminum alloy elevator platform, and is easy to operate. It is widely used in industries such as vehicle maintenance, kilns, and equipment matching.Shijiazhuang,The correct maintenance method can effectively extend the use of the lifting platform.The reduction gearbox, gearbox, external meshing gear and other parts, as well as the hydraulic oil, are all carried out according to the requirements in the table. We provide various aluminum alloy elevator manufacturers to individuals and enterprises nationwide for a long time, with on-site settlement and honest operation. We have offices in various regions and can cooperate for a long timePattaya,. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the aluminum alloy elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing and fastening screws for aluminum alloy elevators, it is necessary to use the correct diagonal first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the aluminum alloy elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the maintenance of the aluminum alloy elevator is completed, the equipment maintenance record must be filled out. The maintenance record should include the equipment maintenance date, the personnel participating in the maintenance, the maintenance items, the brand, model and specification of the replaced parts, the effectiveness of the maintenance, and whether the equipment still has problems after the maintenance is completed.With the continuous development of the economy, meeting the needs of society, and increasing productivity, aluminum alloy elevators play an important role in high-altitude operations.After hours of operation of the elevator, minor repairs will be carried out to the mechanical and electrical systems. Professional aluminum alloy elevator manufacturer is safe, environmentally friendly, and economical! Our products are exported to foreign countries and highly trusted

Strictly follow the operating instructions of the aluminum alloy elevator for safe use, and strictly prohibit illegal operations.Aluminum alloy elevators are made of high-strength and high-quality aluminum alloy materials,Shijiazhuang9-meter aluminum alloy elevator, which have the advantages of beautiful appearance, small size, light weight, balanced lifting, safety and reliability. They are widely used in factories, hotels, restaurants, airports, theaters, exhibition halls, and other places. They are a good safety partner for maintenance equipment, paint installation, lamp replacement, electrical appliances, and other purposes.When encountering overheating in the motor, it is necessary to stop it in a timely manner and continue running after troubleshooting. The motor bearings should be in good condition.Latest consultation,The standard rack free design of the lifting and lowering machine with high safety performance ensures that the platform will not fall, and the limit and limit switches further ensure the safety of construction personnel.Pay attention to checking each steel wire rope for broken wires and loose strands. If it exceeds the relevant regulations, the maintenance process should be carried out on the premise of ensuring the safety of staff. Before repairing the aluminum alloy elevator, the power must be disconnected, and the power must be verified and hung up; No power transmission, people working&# quo; Identification plate for. During the maintenance process, it is not allowed to disconnect the grounding wire of the aluminum alloy elevator. If it is necessary for maintenance work, after the maintenance is completed, the grounding wire must be connected before the power test can be conducted. When replacing spare parts for aluminum alloy elevators, it is necessary to ensure that the spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When hydraulic aluminum alloy elevator maintenance requires entering the platform for internal work, after the aluminum alloy elevator is lifted, the working surface of the aluminum alloy elevator must be fixed or supported firmly with a crane or other equipment,

Overloading or long-term eccentric loading operations are strictly prohibited, as this not only reduces the service life but also poses safety hazards.Focus on Development,Regularly check the connection of each part and tighten it if there is any looseness. The tightness of the body connecting bolts should be checked when the body is under pressure (the rotating arm can be used to cause compression), and all connecting shafts must have split pins and be sufficient. Professional itemsThe process selection of elevator products must pay attention to various matters and should not be blindly selected. The best thing is to conduct market research, on-site investigation, and procurement of the product. This can reduce the occurrence of faults, improve the performance and quality of the product, create good usage results for us, increases the clearance inside the platform, and also makes the transmission smoother and the mechanism vibrates less.Shijiazhuang,Firstly, the maintenance process should be carried out on the premise of ensuring the safety of staff. Before repairing the aluminum alloy elevator, the power must be disconnected, and the power must be verified and hung up; No power transmission, people working&# quo; Identification plate for. During the maintenance process, it is not allowed to disconnect the grounding wire of the aluminum alloy elevator. If it is necessary for maintenance work, after the maintenance is completed, the grounding wire must be connected before the power test can be conducted. When replacing spare parts for aluminum alloy elevators, it is necessary to ensure that the spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When hydraulic aluminum alloy elevator maintenance requires entering the platform for internal work, after the aluminum alloy elevator is lifted, the working surface of the aluminum alloy elevator must be fixed or supported firmly with a crane or other equipment,The classification characteristics of aluminum alloy elevators include various types of aluminum alloy elevators, including single masted aluminum alloy elevators, double masted aluminum alloy elevators, three masted aluminum alloy elevators, four masted aluminum alloy elevators and six masted aluminum alloy elevators. The product has stable performance, exquisite and beautiful appearance, excellent quality, and is widely sold domestically and internationally. It is our company's best-selling flagship product. Below, we will introduce the characteristics of various types of elevators: single mast aluminum alloy elevators: This series of high-altitude work platforms use high-quality high-strength aluminum profiles for lifting structures, which have the advantages of beautiful appearance, small size, light weight, balanced lifting safety and reliability, and are widely used in factories, hotels, restaurants, stations, etc Airports, theaters, exhibition halls, and other places are equipped with double masted aluminum alloy elevators for maintenance, painting,ShijiazhuangElevator lifting aluminum alloy machine, decoration, replacement of lighting fixtures and electrical cleaning and maintenance. The height of this series of high-altitude work platforms includes a range of - meters, and the overall structure is made of high-strength aluminum profiles. It has a large load capacity, a large platform area good stability, flexible operation, and convenient implementation. The lifting and lowering uses an external V power supply or optional power, Walking can be manually pushed or equipped with an auxiliary self-propelled device, which is safe, and practical to operate. Widely used in buildings, hotels, shopping malls, factories, stations, shortness of breath, nausea and vomiting, body weakness and dizziness, psychological confusion and even brain damage. In severe cases, it can cause death, such as starting the engine of the equipment in the garage.