If there are sundries blocked, the pump will not be filled with water. When this happens again, technicians need to properly adjust the liquid level in the pump sump to a proper height, and check the impeller. In case of damage or aging, it needs to be replaced in time,VisakhapatnamSmall deep well pump,　　The motor is scrapped. Moreover, because the length of the long shaft is generally fixed, the installation and use of the pump is troublesome, and the application occasions are subject to many restrictions.Visakhapatnam,　　 Check the wiring of the motor itself: it may be the high temperature caused by wrong wiring. If the wiring is wrong, quickly connect it back to the correct method.　　Third, the whole industrial and mining system operates stably, and the operation of the pump will not affect the work of the whole industrial and mining system.Shenyang,　　 If the hot water within ℃ is recommended, the hot water pump must be used and the external tap water shall be connected for cooling during operation, the impeller clearance of submersible slurry pump is not adjustable for all types of pump otherwise the motor will not be burned due to too high medium temperature.　　In fact,VisakhapatnamWater well pipeline pump, but it is adjustable. During normal operation, the clearance needs to be adjusted regularly to keep the clearance within the range suitable for normal operation.　　 selection of flow: single suction pump or double suction pump shall be selected according to the flow; single suction pump or multi suction pump shall be selected according to the lift.

　　Although the shaft seal occupies a small position in the pump, the normal operation of the pump is closely related to the shaft seal.　　 Check the voltage to see if the voltage is too low to drive. Or the power does not match the speed or the belt slips, resulting in low speed.　　There is no need to equip auxiliary mixing or spraying equipment, and the operation is simpler. The equipment is directly submerged for operation, without noise and vibration,VisakhapatnamBaigang deep well pump, and the site is cleaner.production costs,　　Analysis of installation problems of slurry pump For bearings lubricated with thin oil, oil shall be added according to the oil level line of the oil standard before start-up. Add (HL hydraulic oil in winter and (hl hydraulic oil in summer. The bearing lubricating oil of the slurry pump shall be replaced once after continuous operation ( hours.　　Work, no noise and vibration, and the site is cleaner.　　 The rotor assembly is designed according to the actual situation and the operation is more stable!

　　The disc friction loss of the slurry pump impeller will decrease with the decrease of the impeller diameter, keep the blades overlapped to a certain extent, and the degree of blade overlap will decrease with the addition of specific speedmanagement,　　Rate.　　If you want to know how the slurry pump is classified, you must first understand what the slurry pump is: conceptually, it is a machine that increases the medium energy of the solid-liquid mixture through the centrifugal force generated by the rotation of the impeller, and a device that converts the electric energy into the kinetic energy and potential energy of the medium. and　　So it has a process of water diversion and exhaust. There are usually two ways to inject water into equipment. One is to directly inject water into the pump chamber, and the other is to pump out the gas in the pump to establish a certain vacuum and introduce the water source.Visakhapatnam,　　.　　 The slurry pump mainly aims at conveying flow, so the flow meter (meter) shall be installed in the operation monitoring system as far as possible to monitor whether the flow meets the requirements at any time; In the pipeline system, slag flushing system and pressure filtration dehydration system equipped with hydrocyclone, certain　　 First of all, which leads to accumulation