The combination of hardness and softness.The wood floor in the living room should be made of boards without knots, cracks and mildew. Generally, Fraxinus mandshurica, camphor and teak are better, because their lines are beautiful and clear, and their texture is moderate.The laying method of wooden floor is not very difficult, but it is required to have a certain carpentry foundation.Firstly the wood board shall be processed into the length and width coordinated with the room size according to the room size, draw the center point and vertical and horizontal vertical lines of the room and the floor shall be cleaned before laying.When laying, and lay from the center to the four sides. glue and an appropriate amount of cement can be used for bonding between laths.Note that the glue must be coated evenly to avoid the warping of the plate.The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.Ilojarvi, decorative design layer, high-density board layer and balance (waterproof) layer. A large amount of mixed glue is added to the lining.If the glue used by the manufacturer fails to pass the test, there will be formaldehyde. The reinforced composite floor is wrapped with high-rise plastic film to ensure that formaldehyde remains inside.However, when the temperature is constantly changing and applied,IlojarviMultilayer solid wood floor, formaldehyde will leak into the air. Wear resistance level.BremenThe core layer of WPC wood floor is thicker than that of SPC floor.WPC boards range from to mm, while SPC boards range from to mm.For long-term indoor use,IlojarviSolid wood composite solid wood floor, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, which gives people an elegant feeling. If you want to use them for short-term use or one-time cover, you can choose low-grade products, because the price of low-grade products is low,IlojarviBenefits of wood flooring, there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials, namely wear-resistant layer, decorative layer, high-density substrate layer and balance (moisture proof)Laminate floor is also called impregnated paper laminated wood floor and laminate floor. Qualified laminate floor is made of one or more layers of special impregnated thermosetting amino resin.Third, it is flame retardant, but it can&#;t be burned.

Fourth, after-sales maintenance service.Generally, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation, so we must choose a professional installation teacher to install it.What kind of floor is good for bedroom design? After the primer is dry, brush the first finishing coat and dry it.Laminate flooring reaches grade B and has higher flame retardant performance, which is safer than other kinds of wood flooring.First, low carbon and environmental protection.Equipment maintenance, The construction of installation works is convenient.From the front, the relief surface is no different from the crystal surface. From the side, touch it with your hand, and there are wood grain patterns on the surface.Laminate flooring is suitable for meeting rooms, offices, high-definition cleanliness laboratories, etc. it can also be used for the ground decoration of medium and high-grade hotels, restaurants and civil houses.Although laminate floor has moisture-proof layer, it should not be used in wet places such as bathroom and toilet.The first is the type of raw material.When purchasing solid wood multi-layer wood floor, you should pay attention to whether the floor is the same material and whether the surface has defects such as crack, rot, skin clip, moldy and so on.The general high-quality solid wood multi-layer wood floor shall have clear lines and bright colors on the surface.

SPC floor surface will not have holes and water seepage;There will be no seams after splicing. After being stained, wipe it gently with a rag to clean it easily, leaving no marks that are difficult to remove, and there is no need to maintain it with special maintenance products.Finance Department,The meaning of brand is by no means limited to the popularity of the enterprise.A mature and successful brand does not have strength and popularity, but forms a strong psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers. It is bred in the eyes of consumers by many factors, such as the accumulation of time, which is a guarantee for consumers.Therefore, when consumers choose products, they&#;d better choose big brands to get better guarantee of quality, service and so on.The formaldehyde emission of pure solid wood floor is very small. If the budget is sufficient, it is recommended to use pure solid wood floor.Secondly, the cracking of the paint surface of the wood floor has nothing to do with the wood floor itself but the paint surface technology has nothing to do with it, or the long-term storm, the drying shrinkage of the wood floor and the cracking of paint wrinkles.Ilojarvi,If the cracks on the surface of the wooden floor are not serious, or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, flattening the cracked part of the floor and repainting it. Dirt elimination method: special decontamination oil can be used to wipe oil stains, paint and printing ink;If there are blood stains, fruit juice, red wine, wine and other dirt, you can wipe it with a wet towel or a towel dipped in an appropriate floor cleaning solution, and you can&#;t eliminate the wood floor with strong alkali caustic soda solution.Identify from the packaging.The color is gorgeous, the texture is clear and the pattern gives people a beautiful feeling.It not only has axial drilling texture, but also has irregular thick and light parallel lines for wood texture, with clear and smooth texture and a sense of hierarchy;There are also rotary drilling textures. The wood texture also has mountain or wavy lines. The texture is beautiful, fluctuating and cool.