What is the purpose of flat steelThe sodium cyanide passivation treatment of alloy pipe can be divided into four categories. Before passivation treatment the surface of alloy pipe shall be clear of oil stains, pickled and passivated. Passivation treatment can be carried out only after the surface is cleaned, and the workpiece of alloy pipe products can be infiltrated into aqueous solution. The passivation treatment of the alloy tube in sodium cyanide transforms the surface layer into a very thin passivation treatment film, which determines that the color of the surface layer has no change before and after passivation treatment,Ray pontiniSeamless pipe manufacturer, and the reproducibility of the solution is good.Ray pontini,Generally speaking, the precision of seamless pipe is relatively low, and it is prone to uneven wall thickness, low surface luminosity and high customization cost. At the same time some pits or black spots are easy to appear on the inner and outer surfaces. In addition to these, the seamless pipe manufacturer needs to carry out off-line processing for its detection, and its strength is relatively high, the pressure is high, and its advantages can be reflected in the material of mechanical structure. Seamless pipe can be divided into hot extrusion, hot rolling and cold rolling stainless steel pipe according to its rolling method. In addition, different elements can also be used for classification. The inner and outer surfaces of seamless pipes shall be free from chaps, folds, cracks, cracks, scabs, delaminations and other defects. If these defects are to be removed, it is necessary to use machining. The removed seamless pipes shall not have negative deviation after the inner diameter is followed, If other minor surface defects with negative deviation cannot be removed, and its depth shall not be greater than . mm.What are the requirements for alloy pipe construction accessoriesLabe,The wear resistance, fracture toughness, impact toughness and bending strength under different process conditions were compared, and then the heat treatment process of GCrMo was determined. Development and application of ZYS- bearing damping and antirust oil. Bearing is a new type of multial damping and antirust oil. It takes refined mineral oil as the base oil and is equipped with various additives such as antirust and antifriction. Through comparison test, matching test with lubricating grease and user test, it is proved that ZYS- bearing damping and antirust oil has outstanding damping effect and good antirust lubrication performance.Heating surface pipes, economizers, superheaters reheaters, pipes for petrochemical industry, etc. for high-pressure boilers (working pressure is generally above MPa and working temperature is between ℃ ~ ℃)C-section steel has uniform zinc layer, strong adhesion, no zinc scar, no zinc leakage and high dimensional accuracy. All surfaces are wrapped by zinc layer,Ray pontiniHow much is a meter of 2-inch galvanized pipe, and the zinc content on the surface is usually -g /? It has long service life, corrosion resistance and durability. It is a kind of stronger protection.

Some applications of I-beam:What are the quality protection measures for galvanized pipe during weldingWhether I-section steel is ordinary or light, because the section size is relatively high and narrow, the moment of inertia of the two main axes of the section is quite different, so it can only be directly used for members bent in the plane of their web or form lattice stressed members. It is not suitable for axial compression members or members with bending perpendicular to the web plane, which makes it very limited in the scope of application. I-beam is widely used in buildings or other metal structures.Word of mouth recommendation,The crack mainly occurs at -mm from the edge of the alloy pipe. The shape is several parallel vertical cracks of different sizes. The regularity is that the thicker the specification and model of the alloy pipe is The wider the width, the more serious the disadvantages.Because alloy pipe is a very unique pipe fitting, we must use appropriate methods to carry out installation in the case of installation, so as to ensure the performance index of the data. Generally, when installing alloy pipes, we will use some flanges and elbows to fix them, so as to ensure that the raw materials can be fixed very well. Therefore, when we carry out use, we must ensure the quality of flanges and elbows, so as to ensure the actual effect of alloy pipe assembly. If there are instrument panel components that must be assembled on the pipeline, they must be installed together.Ways to obtain surface compressive stress characteristics of alloy tubes

According to the theory of steel structure, the I-beam flange should be stressed, that is, the I-beam should be standing rather than lying down.Excellent service,It is widely used in various fields of national economic construction, such as buildings, power stations, oil drilling platforms, vehicles, highways, subways, steel structure plants and large warehousesFrom the current scope of use, it is mainly widely used in glass curtain wall, power tower, communication power grid and other industries. In recent years, it has been widely used in many regions and industries, which is enough to show that the quality of galvanized pipe is very good, and it also brings a lot of convenience in the process of use, so it can be used better.I-beam has the dual properties of high hardness and toughness materials. Compared with other engineering wear-resistant materials in China, such as various alloy steel plates, cast wear-resistant plates, cast stones,Ray pontini20# steel seamless pipe, rubber polyurethane, etc., it has irreplaceable comprehensive excellent properties.Ray pontini,Because the section size of ordinary I-beam and light I-beam is relatively large and narrow, the moment of inertia of the two main shafts on the section is quite different which limits its application range. I-beam shall be selected according to the requirements of design drawings. In the structural design, the use of I-beam should be reasonably selected according to the mechanical properties, chemical properties, weldability and structural size of I-beam.What is the purpose of flat steelIts heat sealing effect is remarkable. It can be directly buried immediately, which can not only save resources, not occupy the natural environment, but also purify the environment. The transportation of gas can meet the requirements of long-distance transportation, prevent actual operation and maintenance, meet the requirements of thermal insulation and cold protection, reduce heating equipment, unique and convenient installation, it is more convenient to use. It can also be used for the transportation of floor heating and hot springs.