Setting requirements: The layout and installation of all cables and wiring of electric elevators should be able to prevent mechanical damage.Chain type electric lifting mechanism: With a good guiding mechanism, it can ensure that the equipment does not tilt during operation. Gear and rack electric lifting mechanism: precise transmission and high cost.Hel Brown,Precautions during operation: Mechanical operations should be gentle and smooth, and mechanical operations should be avoided, otherwise impact loads will inevitably occur, causing frequent mechanical failures and greatly shortening the service life. Generated during homeworkSetting requirements: The quality of the standard section should meet the requirements of the product manual. Before installing the construction electric elevator, all components should be inspected, and standard sections and other components with severe wear and deformation should be replaced.San-Gregorio-de-Nigua,The angle between the wall bracket and the horizontal plane should comply with the requirements of the user manual.The L distance depends on the selected wall mount model.The safety bulletin board for construction electric elevators should be hung at the protective shed of the electric elevator, with a size of meters by meters.

The entrance of each landing platform must be equipped with a landing door, which must open towards the landing platform side, and the door bolt must be set on the side next to the construction electric elevator.The counterweight steel wire rope should be equipped with an anti loosening device that is sensitive and reliable.Work is essential, and the main protective accessories include safety belts, guardrails, protective covers, platforms and stairs etc.how much, the door should be able to withstand and have no deformation; - Deformation not exceeding mm; After the testWhen applying a normal force of N to any position on either side of the door using a rigid mm square or circular flat surface in the locked position of the landing door, it worked normally.During the use period, the user unit should organize professional technical personnel to inspect the construction electric elevator monthly according to the standard requirements, and record the inspection results.Especially suitable for steel structured factories, suitable for both indoor and outdoor installation.

Chain type electric lifting mechanism: With a good guiding mechanism,Small safe operation distance: Circuit voltage (kV) of external power lines<~~~ Small safe operation distance (m) Setting requirements: A small safe distance should be maintained between the outer edge of the construction electric elevator and the edge of the external overhead power line.Items and other miscellaneous items.To ensure safe and reliable braking of the lifting platform and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure. Electrical system explosion-proof button SB&flash; The rotation of the SB motor and the commutation of the explosion-proof electromagnetic directional valve are used to maintain load increase or decrease,Hel BrownHuozhou,Hel BrownPiacenza,Hel Brownlush mountain, and; Program adjustment time delay to avoid frequent movement of electric elevators that may affect their service life.Hel Brown,There is no need to set up a computer room above the shaft like an elevator, and the top floor height can be installed at least . meters.Safety performance: Electric elevators not only have the safety device of traditional traction elevators, but also have an overflow valve to prevent excessive system pressure during upward movementSpiral electric lifting mechanism: With all the functions of a regular lifting platform