KavadachiHow to stick the floor leatherHow to debug industry to save energy and protect environment
release time:2024-04-26 12:26:54

The meaning of brand is by no means limited to the popularity of the enterprise.A mature and successful brand does not have strength and popularity, but forms a strong psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers. It is bred in the eyes of consumers by many factors, such as the accumulation of time, the practical action of enterprises, the continuous improvement of products and services and so on.Enterprise brand is a commitment and an attitude of an enterprise, which is a guarantee for consumers.Therefore, when consumers choose products, they&#;d better choose big brands to get better guarantee of quality, and the refurbished board is made of floor, white putty and paint.Scrape the surface with a blade. If it is white it is a refurbished plate.How to choose the floor?What is the difference between solid wood, composite and reinforced?Kavadachi,KavadachiFloor leather construction,Hearing effect: wood is a natural porous material with good sound absorption and sound insulation performance.Therefore, houses decorated with wood materials have small echo and good sound insulation effect, giving people a comfortable and quiet feeling.I have seen the evaluation video before. Netizens rub the steel ball of cleaning tableware back and forth on the SPC floor, and there is no trace on the surface.If it&#;s a wooden floor, I think it&#;s not like it anymore. You can see how good its wear resistance is.Kos,durability Green environmental protectionSecondly, the wear resistance is several times that of ordinary floor.


KavadachiHow to stick the floor leatherHow to debug industry to save energy and protect environment



Anti slip, more astringent in case of water, not easy to fallFor reinforced wood flooring, the main standard of floor environmental protection is formaldehyde emission.Under the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panels was E (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit was very loose.Even if the product meets this standard, its formaldehyde content may exceed three times that of E wood-based panel, which is seriously harmful to human health. Therefore, in the first environmental protection revolution, the flooring industry implemented E environmental protection standard, that is, formaldehyde emission ≤ m/l.Although it does not pose a threat to the human body, there is still a lot of free formaldehyde on the floor.The flooring industry has started the second environmental protection revolution.In this environmental protection revolution, the flooring industry has implemented E environmental protection standard, that is, formaldehyde emission ≤ m/l.The best way to identify whether the floor is environmentally friendly is to smell a large area on the floor with a hammer to make the floor smell a lot of free formaldehyde.Sixth, fire and flame retardant.Latest quotation, Stimulating effect.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing glue shall be applied on the ground according to the size of the floor paint cloth, it can be paved. When pasting so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air,KavadachiThere are several types of SPC floor buckle, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth. Green environmental protection. SPC floor is a new floor material invented in response to national emission reduction. PVC resin, the main raw material of SPC floor, is an environmentally friendly and non-toxic renewable resource. It is free of formaldehyde, lead and benzene, heavy metals and carcinogens, soluble volatiles and radiation. It is truly natural environmental protection.SPC floor is a reusable ground material, which is of great significance to protect our earth&#;s natural resources and ecological environment.


KavadachiHow to stick the floor leatherHow to debug industry to save energy and protect environment



The most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the air, and the wood floor cracks in this processPrice, Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time,KavadachiHow much is the wooden floor per square meter, it has special advantages in the reconstruction of old buildings.Which brand of Taiyuan Fenghua sports floor? The wooden floor of Basketball Hall produced by professional manufacturers adopts high-quality raw materials, such as Russian maple,Third etc.stabilityKavadachi, look.Main differences between WPC and SPC flooringHow to buy solid wood composite flooring?

comment list
©2009-2024Metal Microblog  Sitemap