The current fixed hydraulic lift is mainly a closed or mesh lifting channel surrounded by buildings and light steel structures.The enclosed or mesh frame, the fixed hydraulic lifting platform is installed on both sides of the fixed hydraulic lifting platform: it has a hydraulic driver motor, oil pump, safety valve, fixed hydraulic lifting platform speed regulating valve,Hui Cenplatform, exchanging direction valve and other hydraulic pressure The small fuel tank cylinder part of the component: consisting of one or more cylinder composition of one or more cylinder composition of the lift cylinder straight platform or a rising piercing pier. Doors, generally open platforms do not have door electrical parts: consisting of platform parts of power, signal, lighting and other devices: the steel structure platform that carries heavy objects, with closed (ie car) or open type, on both sides, sides, sides, sides, sides, sides, sides, sides, sides, sides, and both sides. There are guided roller or guide boots, and the auxiliary part of a lifting cylinder or lifting fork -type steel frame can be connected at the bottom of the platform: it is composed of hydraulic pipes, pipes, pressure gauges, and steel structure bases; safety device: safety valve, limit limit, door door, door, door door, door,Hui CenCylinder mounted hydraulic lifting platform, door, door, door door, door, door, door, door, door, door, door, door, door, door, door, door, door door, door door, door Electromechanical locks, rupture valves, emergency switch and short -circuit protection.The power unit is adjusted, whether it is a fork -cut lifting platform or a rail -type lifting cargo ladder, it is from the power unit and the oil cylinder. The power unit has four holes during production. In the hydraulic oil flow, we can adjust the motor speed or electric hydraulic ratio valve to adjust the hydraulic oil flow; which factors will affect the lift speed oil pipe of the hydraulic lift. The longer the hydraulic oil pipe the longer the upsurge. Therefore, during installation, the length of the oil pipe should be reduced as much as possible within the allowable range of the design; on the basis of adjusting the power unit, the size of the oil pipe can also be adjusted. On the premise of ensuring that the equipment meets normal demand, correspondingly can perform correspondingly Adjustment.Hui Cen,Failure exclusion: When the elevator power supply light is turned on, press the lifting button, the motor rotates,Put all the hydraulic oil in the fuel tank, remove the oil absorbing filter, wash it back, and put it back to the fuel tank,Hui CenChain hydraulic lifting platform, and install it in situ. The new oil is filled with new oil in the fuel tank.The load of the cargo, the tonnage of transporting the cargo also affects the speed of lift, and reaching the excellent value of the lifting platform to transport the cargo is a guarantee. If the weight is severe, it will affect the speed. If the cargo is too light, it also affects the normal transportation time.Failure exclusion: When the elevator power supply light is turned on, press the lifting button the motor rotates, and the lifting platform does not rise. This may be the reversal of the motor after the three -phase power supply is connected. Just change the two -phase line of the heavy machine.

What are the common faults of the hydraulic lifting platform. The oil cylinder load of the hydraulic lift platform is severe. Unemployment in the internal closed ring is incomplete or internal obstacles can easily cause uneven stress, resulting in uneven height of the oil cylinder. It is recommended to carefully check whether the oil cylinder is normal.When using an elevator, you should listen to whether the elevator has made an abnormal noise. If there is an abnormal noise, we should stop using it immediately to avoid severe damage to the elevator.Process inspection,There are foreign bodies inside the hydraulic lifting platform, which causes uneven stress to transport hydraulic oils to cause hydraulic oil. Unemployed countertops will occur. It is recommended to carefully check whether the conveying oil pipe is unblocked.The brush of various departments should be kept clean and the brush pressure should be adjusted to make the area of ​​not less than %.After , hours of lifts, repair machinery and electrical systems.

Because the hydraulic lifting platform power unit requires oil sources, the structure is relatively complicated, and it also has certain pollution and influence on the environment. The movement device is relatively fast. The structure of the electric rod is very simple, and the space occupies is small, but there is no advantage in price, so the power supply will be used as the power source of the lifting machine. The DC motor is directly transmitted to other mechanical devices through the reduction of the reducer.Marketing Department,The fixed boarding bridge profile loading and unloading mobile boarding bridge is already a very easy -to -see structural form at the modern logistics scene. It is the point and end point of the corporate logistics chain, and it is a installation and unloading operation platform for enterprises to quickly, turn on products and goods. The height of the loading and unloading operation platform is fixed, but there is always a height gap or gap between the height of the transportation of the carriage and the loading and unloading station. As a result, the transportation forklift cannot enter and exit and transport vehicles directly to load and unload the goods. Use Dengqiao Bridge to provide reliable connections. Make a forklift, and quickly enter and exit the transportation vehicle for loading and unloading operations.Any product in the market, if the product is very cost -effective, then this type of product often becomes the choice of more people. After all, but because there are more brands engaged in production, many times to understand the cost -effectiveness, it is still necessary to analyze and compare from multiple aspects.Hui Cen,Everyone knows that the construction elevator will be used during the construction process. This is because the construction lift is stable and strong in use. At the same time, due to its small advantages, it is widely used in the field of high -rise buildings.Any product in the market, if the product is very cost -effective, then this type of product often becomes the choice of more people. After all, people want to get cost -effective products. The same is true when the electric lifting platform is on the markets in various places, but because there are more brands engaged in production, many times to understand the cost -effectiveness, it is still necessary to analyze and compare from multiple aspects.The correct use of hydraulic lifts can extend its service life and play its important role. So how to use it?