The garage door should be opened or the exhaust device should be opened. So that the exhaust gas can be stored in the garage at any time. Even if working outdoors. Also do not stay near the exhaust pipe of the working engine for a long time.We are well aware of the harm of pressure, but how can we prevent water from seeping into the hydraulic system of the elevator? After reading this article, you may know that oil contains excessive water impurities, which can rust the hydraulic components of the elevator, reduce the strength of the oil film, and accelerate mechanical wear. In addition to preventing water impurities from invading during maintenance, it is also important to note that when the oil storage tank is not in use, the cover should be tightened and placed upside down; Oil with high water content needs to be filtered multiple times, and the hydraulic oil of the elevator that is filtered each time needs to be replaced with a dry filter paper. In the absence of specialized instruments for detection, the oil can be dropped onto the hot iron plate, and no steam can be emitted before being added immediately. So when repairing the hydraulic system of aluminum alloy, be careful of the entry of moisture!Middleburg,Attention: When replacing the adjusting steel wire rope, the half round head bolt should be unscrewed first to allow the moving nut to roll together with the force bolt, so as not to move the nut up and down too much and damage other components. After the replacement of the safety wire rope on the elevator platform, adjust the position of the collision rod from the beginning to reach the super high limit position. The limit switch of the landing elevator platform should be regularly inspected and replaced or repaired in case of damage.It is composed of several parts such as the base, column, crossbeam, and motor (power unit), and each system is complementary and indispensable. The increase of the lifting platform mast ensures the stability of the equipment at high altitude, ensures work safety, reduces the amplitude of equipment shaking, and makes high-altitude operations more stable.Koronadal,Attention must be paid to the rotating parts of the elevator. When the engine is running. Hands and tools must be kept away from rotating fan belts and fans. During the test drive, it is necessary to be in a spacious area and ensure that the aluminum alloy elevator can safely stop and turn effectively.Due to its beautiful appearance, light weight, flexible operation, and convenient implementation, elevators are particularly suitable for various high-altitude work platforms,MiddleburgMobile hydraulic lifting platform, such as high-altitude maintenance,MiddleburgHydraulic elevator structure, factories decoration, decoration, cleaning and anti-corrosion, etc. At the same time, we should always keep in mind the safety operation regulations for it.Users can choose the power mode and configuration according to their usage range: the power system includes: DC power supply, single-phase or three-phase power supply, diesel engine. Walking: assisted self-propelled two wheel traction, self driving, and car modification. Outriggers: mechanical outriggers, hydraulic outriggers, ordinary hand cranked outriggers, and pull-out outriggers. System: explosion-proof electronic control system, remote control system, PIC system. Hydraulic pump station: domestic lifting platform dedicated pump station, imported pump station from Italy with external protective devices: organ cover type, mesh type, and iron plate sealed type.

The vehicle body should be grounded according to regulations and the lifting operation should be commanded by the person in charge of the work. The person in charge should follow the standard signal and communicate with the lift operator. The signal emitted must be clear and accurate.Usage: Single column elevator: This series of products is indoor and widely used for high-altitude operations in various industries such as star hotels and large supermarkets. It has lifting balance, easy operation, and can enter general lobbies. It can enter and exit the elevator at will with low power consumption, no pollution, and does not harm the ground during work. It can be used for wall work and exploration work, and there are no dead corners during work. The single column aluminum alloy electric elevator, equipped with gantry cross frame accessories, is very suitable for maintenance work in cinemas, auditoriums, etc. The gantry frame is easy to assemble, labor-saving to operate, flexible to move, capable of crossing obstacles such as fixed seats with a height of up to m, with good rigidity and stability. Equipped with universal casters for flexible mobility. The span of the two end brackets can be adjusted, which is suitable for crossing different obstacles. The two end brackets are vertically adjustable and can be used for operations on slopes or steps with a certain slope.Enhance the lift functionQuality improvement,Made of high-strength rectangular steel pipes, with good rigidity and stability. Equipped with universal casters for flexible mobility. The span of the two end brackets can be adjusted, personnel must enter and work inside the elevator, and the elevator must be suspended to prevent sudden lowering of the elevator and causing casualties.In modern society, there are many high-altitude work projects, but also to the working environment and equipment used in construction. Therefore, high-altitude work equipment has received more and more attention, with continuous development and innovation in lifting and lowering, and has been trusted and used by customers.

Work on the elevator workbench. Must wear safety belts, helmets, and other tools to prevent accidents.Quality inspection report,We are well aware of the harm of pressure, but how can we prevent water from seeping into the hydraulic system of the elevator? After reading this article, you may know that oil contains excessive water impurities, which can rust the hydraulic components of the elevator, emulsify and deteriorate the oil reduce the strength of the oil film, and accelerate mechanical wear. In addition to preventing water impurities from invading during maintenance, it is also important to note that when the oil storage tank is not in use, the cover should be tightened and placed upside down; Oil with high water content needs to be filtered multiple times, and the hydraulic oil of the elevator that is filtered each time needs to be replaced with a dry filter paper. In the absence of specialized instruments for detection, the oil can be dropped onto the hot iron plate, and no steam can be emitted before being added immediately. So when repairing the hydraulic system of aluminum alloy, be careful of the entry of moisture!Secondly, for the annual maintenance of elevators, the following points can be followed. Annual maintenance is a major maintenance, so special attention should be paid to the following points: check all hydraulic pipelines and joints of the elevator. The pipeline must not be damaged, and the joints must not be loose. All joints must be tightened.Product description of single mast elevator: Single mast lifting platform is suitable for single person climbing operations; The mast is made of high-strength profiles, with high safety and light overall weight; Compact structure, allowing access to narrow passages and elevators; A self-developed integrated built-in slider is used between each mast, which reduces the dynamic gap between the masts and makes the operation smoother and more reliable during lifting, far superior to ordinary independent guide wheel support structures; The lifting drive chain adopts a double chain structure and industrial plate chain, with high bearing capacity and safety factor; The guardrail structure is integral and collectible making it extremely simple and convenient to operate; The hydraulic power unit adopts an integral pump station, with a compact structure and reliable performance; The hydraulic system is equipped with an emergency descent function, which can descend in case of unexpected situations such as power outages; The equipment voltage is V DC, effectively ensuring personal safety; The equipment is equipped with leakage protection switches, emergency stop switches, limit switches, etc. The button boxes are all waterproof in design.Middleburg,Elevator: The fully automatic high-altitude work platform has a sturdy structure, which minimizes the deflection of the high-altitude work platform. Equipped with automatic walking function, it can walk in different working states without the need for external power supply. The handle can walk at an adjustable speed, with flexible movement, convenient operation, and easy lifting. Only one person can complete forward, backward, turning, slow walking, and up and down movements, saving labor and effort. Can be designed and produced according to user requirements.Single masted elevators are widely used in factories, hotels restaurants, stations, cinemas, exhibition halls, and other places. They are a good safety companion for maintaining equipment,MiddleburgXinxiang hydraulic lifting platform, painting and decorating, replacing lighting fixtures, electrical appliances, cleaning and maintenance, and other purposes.Blow out the plunger with compressed air, then install it and reinstall it.