Ultra light and ultra-thin If the address cannot be used temporarily, the indoor air quality and commodity circulation shall be maintained, and it shall not be covered with plastic boxes or newspapers so as to prevent the long-term surface paint layer from becoming sticky and dull.Svetti Nicole,First, the price is cost-effective.Many people think WPC floors are thick and therefore durable.OK, it&#;s a durable floor,Svetti NicoleIs formaldehyde of aggrandizement floor serious, but no more than SPC floor.Compared with WPC flooring, SPC flooring has good density.The higher density makes them resistant to damage and heavy weight.They will not be affected by the falling or moving of heavy objects.Therefore, SPC is considered to have good durability.Ptuj,When laying wooden floor pay attention to the length and direction of the floor consistent with the entry direction to ensure good visual effect.First, shake the container containing floor wax first and stir it fully and evenly.Before waxing the wooden floor of the whole room choose the brand you need (i.e. grade);When using liquid spray waxing, local trial must be carried out in inconspicuous places such as corners of the room to confirm whether there are abnormalities.In order to prevent floor wax from polluting walls, skirting lines and furniture, the above parts must be covered with adhesive tape paper.Fully soak the floor wax with a clean rag. It&#;s best not to fall off.The biggest highlight is that they are not afraid of water and shop willfully anywhere.

PVC floor has ordinary floor raw materials, which can not be compared with the actual effect of sound insulation, and its sound insulation performance can reach - sound shells. Therefore, PVC floor is selected in the natural environment that must be quiet, such as hospital wards, school libraries, multi-al halls, etc,You will no longer have to worry that the sound of high-heeled shoes and the ground will harm your logical thinking. PVC flooring can show you a more comfortable and personalized living environment.Quantity of surface wear-resistant paper: the quantity of surface wear-resistant paper refers to the quality of paper per square meter. The higher the quantity of surface wear-resistant paper, the more metal composites, and the more wear-resistant the reinforced anti-static floor is made, but the clarity will be reduced to a certain extent.The quantitative ysis of common wear-resistant surface paper is grams per square meter and grams per square meter.The reinforced anti-static floor made of g / m wear-resistant surface paper can reach more than revolutions.The reinforced anti-static floor is made of grams of surface metal composite per square meter, and its wear resistance can reach more than revolutions.When lifting the anti-static floor, be sure to use wear-resistant surface paper first, otherwise it will seriously endanger the promotion of the anti-static floor.Spent a lot of money on the solid wood floor at home. If it is used for a long time, the floor surface will lose luster, but it can&#;t be replaced. How can it restore brilliance?First, redecorate the floor to make it look new.What are the main steps of solid wood floor renovation? Deformation level.Price,The first kind: pungent taste. If the floor tastes like this,Svetti NicoleHousehold wooden floor, it means that it contains a lot of formaldehyde. You need to be careful when choosing. You&#;d better not buy it;Don&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness, and too much application will lead to poor film formation.Keeping thin and uniform is the key to waxing.Do not dilute the floor wax with water.Solid wax must be ground after polishing.At the level of home decoration effect, there are many joints on the paved small floor, which is messy. The stains at the interface can not be solved, the bacteria are very easy to breed, and the large floor is popular in the sales market.

Direct contact with formaldehyde can cause skin allergy, pigment spots and atrophy. Inhalation of high concentration formaldehyde can cause chronic bronchitis.Management Department,As the wear-resistant layer on the surface of the laminate floor has good wear resistance, compression resistance, fire resistance, flame retardancy and chemical pollution resistance, in daily use, it only needs to be cleaned with a twisted dry rag, mop or vacuum cleaner. If the floor is greasy and dirty, wipe it with a cloth stained with detergent. Good quality and low price.Generally, the moisture content of non dry wooden keel is about %, and that of qualified wooden floor is generally about %. If the humidity difference is too large, the wooden floor is easy to absorb moisture quickly. If the time is long, the floor will arch up and the paint will crack.Therefore it is best to choose dry and straight wood as keel.After the keel level is determined, the keel and floor can be fixed with nails.Svetti Nicole,Third, strong wear resistance. Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor, without keel. As long as the ground is flat, due to the simple installation regulations,Svetti NicoleSmooth floor leather, health and comfort, and is deeply loved by many small partners.Solid wood flooring has many advantages, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor? Stable quality and not easy to damage: the solid wood composite floor plate adopts double plate composite type, and the wood chemical fiber is bent into a network structure and laminated. Various thermal stresses of wood are integrated into multiple plates to ensure the flatness and stability of the wood floor and preserve the beauty of the solid wood floor

SPC floor surface will not have holes and water seepage;There will be no seams after splicing. After being stained, leaving no marks that are difficult to remove, and there is no need to maintain it with special maintenance products.More accurately, SPC floors with obvious pungent smell should not be environmentally friendly.SPC rural grass-roots raw materials themselves do not contain indoor formaldehyde. The qualified SPC floor should be . There is no formaldehyde release. It is likely to have the taste of air fragrance and modifier. It is not easy to cause harm to everyone&#;s body and make people feel uncomfortable.Although the installation method of SPC latch floor is the same as that of wood floor, the grasp of details in the installation process is also different from that of wood floor.According to the current market survey, the SPC lock floor of different brands will have edge warping, arching, large expansion joints, and even lock fracture after paving on individual sites.Belovo,The solid wood floor is made of natural wood after drying and processing. It has natural texture, environmental protection and health good touch and elasticity, and also has good sound insulation, sound absorption and heat insulation performance. It won&#;t feel cold when sitting on the solid wood floor in any season. It is very suitable for families with older children at home.Honest wood flooring can be renovated and continue to be used after professional processing.Solid wood floor also has some shortcomings, not wear-resistant, not moisture-proof, easy to lose luster, so home decoration solid wood floor should pay attention to the usual waxing and maintenance work!When choosing wood flooring in , customers attach great importance to quality.Although the solid wood floor is good, the maintenance is very complicated.In all stores released high wear-resistant solid wood flooring.It is said that this kind of floor not only has the characteristics of high wear resistance and general solid wood floor, but also has strong coating adhesion, high definition, good corrosion resistance, strong waterproof, not easy to crack and paint.Stolin, The construction of installation works is convenient.In today&#;s building materials industry, there are many incidents of profiteering and even damaging the interests of consumers. The bad atmosphere has led to the reduction of consumer trust.The price is in a state of confusion, and consumers are confused. They don&#;t know whether their pay is worth it. Therefore, they all want to know that there is a relatively transparent price.In case of large-scale immersion or partial long-term immersion in water accidentally, if there is any leveling stay, it shall be immediately sucked away with a dry rag and allowed to be dry. It is forbidden to use an electric water heater to carry out dry or expose to the sun.

Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium,BelovoWhat is good for outdoor waterproof board, and the furniture is deep.If the color of the wall in the home is very light, and the color of furniture can be moderately dark.Rubber: rubber with poor toughness and stability.From the perspective of environmental protection, the thin one is better than the thick one. Because the thin one uses less glue per unit area. The thick one has less density than the thin one, and the impact resistance is poor, but the foot feel is slightly better. In fact, there is little difference between the two. In fact there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice.Management Department, Good fire resistanceSolid wood floor is very beneficial to physical and mental health, environmental protection and excellent home decoration effect.The price is quite expensive. Installation and maintenance must be done carefully, and waxing should be done according to time.The price of ordinary solid wood flooring ranges from yuan / m to yuan / m, and some expensive ones even dare to reach yuan / mHow many years can solid wood flooring be used?From the perspective of the general service life of the floor, whether it is solid wood floor, reinforced composite floor or multi-layer composite floor, if it is used at home, it can generally be used for - years depending on the use environment.The surface coating of piano paint is actually the paint used on the surface of solid wood floor for laminate floor. It is only bright paint. The wear resistance of this coating is far from that of aluminum oxide surface. Its wear resistance is low, and solid wood floors are developing towards high wear resistance. Unless you like the coating of this surface.

When asked about the service life and wear resistance of SPC floor in the message area of the message board, it is often mentioned to take out artifact such as fruit knife or key and scratch on the surface of SPC floor. If there are scratches, they are classified as non wear resistance.In fact,BelovoWhat are SPC flooring manufacturers,BelovoWhich is cheaper, ceramic tile or wooden floor, the national wear resistance test of PVC latch floor is not simply to scratch on the surface with artifact, but to grind and polish the floor with thick bottom circular stone roller under the condition of kg charging. After how many revolutions of rotation and polishing, the wear-resistant layer on the floor surface is damaged and exposed to the speed of rural grass-roots.The rotational speed of this connection point is an index value considering the wear resistance of PVC latch floor.For example, the minimum speed of national composite floor is rpm.Therefore,SPC floor has a thickness of mm-mm, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation.Many customers pay great attention to their own quality when laying wooden floors, but usually ignore the quality of wooden keel ceiling (according to the main purpose, you can clearly know which floor releases a lot of formaldehyde. Whether to renovate the board.Belovo potential safety hazards will be planted in the future.If you master the structure of the two floors, Select the number of wear-resistant revolutions Overweight articles shall be placed stably. Furniture and heavy objects shall not be pushed, pulled or dragged hard to avoid scratching the surface of the wear-resistant layer. Products of well-known brand manufacturers with business history are preferred

To sum up, the relief is really beautiful;If the same gram of wear-resistant paper is used, but it&#;s more expensive;Waterproof and cost-effective. Not many people know its role. High cost performance.BOGO Wenjie,Poor decorative effect: the surface of the laminate floor is a wear-resistant layer and decorative layer, which are all printed by bionic technology. Compared with natural solid wood, the overall paving effect is distorted and the visual effect is harder.Selling price of solid wood flooringPoza-Rica-de-Hidalgo,The density of laminate floor substrate (high density fiberboard) shall be .-. g / cm, and it is not appropriate to have too low or too high density.Easy to clean: simple,BOGO WenjieTop ten rankings of composite flooring, bright as a new mouth, dust-free, very easy to clean.First look at environmental protection

Of course, its advantage is not just this.Compared with ordinary flooring, what are the reasons for the popularity of SPC flooring?First, it is easy to clean. Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach about revolutions.According to the thickness of wear-resistant layer, the service life of SPC floor is more than - years.SPC floor is a long-life floor, especially suitable for public places with large flow of people and high degree of wear.Installation requirements, Daily maintenance does not need waxing. It can be wiped with towel or wet mop. It is widely used in indoor families, hospitals, studies, office buildings, factories, public places, supermarkets, businesses,BOGO WenjieFloor price of Basketball Hall, gymnasiums and other places.SPC floor is mainly composed of a certain proportion of calcium powder and PVC stabilizer to form a composite floor paving material.It is a new material invented in response to national emission reduction, hard SPC indoor floor.SPC floor takes calcium powder as the main raw material. After plasticizing and extruding sheet, four roll calendering hot compress color film decorative layer and wear-resistant layer, SPC floor does not contain heavy metal formaldehyde with harmful substances. It is an environmental protection floor free of formaldehyde and a real formaldehyde floor.If the new floor is to be sent to a room equipped with large equipment, it may need to be rewired before moving.Make sure to contact an electrician before installing the floor.If the equipment needs to be moved, there is no need to worry that the heavy machinery will scratch it before installing the old floor.Keep tarpaulin and tape.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.

Eighth, antimicrobial activity.assets, which is not easy to cause harmful substances and ensure the health and safety of residential gas.Then select one or more floor waxes, which can be adjusted to the same tone as the floor.Heat the strip solid recovery wax with an electric soldering iron and fill it on the scratches on the floor. No scratches can be seen. Rich colors and patternsBOGO Wenjie waterproof, PVC has no affinity with water,BOGO WenjieWhich is better, laminate floor or solid wood floor, and will not mildew due to high humidity.In southern areas with more rainy seasons, SPC flooring will not be deformed due to moisture, so it is a good choice for flooring.Maintenance method editing voiceSome people say this method is unscientific and laminate flooring can&#;t soak in water, but I have done some experiments and come to another conclusion.

The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.Secondly, choose the color you want.Carmen JaneIn the process of laying plastic floors in kindergartens, details determine success or failure. When installing plastic floors, we should pay attention to the details of all links of laying and do not have luck.Otherwise, the application effect of plastic floor can not be brought into full play, and the service life will be reduced.In some new houses, the road surface is fully covered with wooden floors, but over time,Carmen JaneSPC floor environmental protection, the wooden floors are very easy to deform, curl edges and are not waterproof. Now such raw materials are popular abroad, especially in the real indoor formaldehyde, which is not deformed. No wonder they are popular ~. Whether to renovate the board.Sil-li,When asked about the service life and wear resistance of SPC floor in the message area of the message board, it is often mentioned to take out artifact such as fruit knife or key and scratch on the surface of SPC floor. If there are scratches, they are classified as non wear resistance.In fact, the national wear resistance test of PVC latch floor is not simply to scratch on the surface with artifact, the wear-resistant layer on the floor surface is damaged and exposed to the speed of rural grass-roots.The rotational speed of this connection point is an index value considering the wear resistance of PVC latch floor.For example, the minimum speed of national composite floor is rpm.Therefore the wear resistance of PVC latch floor is professionally measured by the national testing center.Selling price of solid wood flooringIn addition, pay attention to whether there are sawdust and stratification on the cutting surface of the plate and whether there are sawdust and stratification on the cutting surface of the solid wood floor.

Sixth, fire and flame retardant. Use large-scale floor renovation machinery to polish the floor for many times, remove about .mm of paint layer, surface layer and wood layer, and make the floor surface in a new state of fine and smooth after fine sand.The floor corners are ground with a small grinder to make the whole smooth.SPC vinyl flooring manufacturers focus a lot on the dense core of SPC flooring.They tried to make it more resistant to shrinkage.consumption,Headache, dizziness, fatigue, nausea, vomiting, chest tightness,Carmen JaneWood waterproofing, shortness of breath, eye pain, sore throat, stomach pain, palpitation, shortness of breath, insomnia, weight loss, memory loss, autonomic nerve obstruction, etc.Long term inhalation by pregnant mothers is likely to cause abnormal fetuses and even death.The surface layer of SPC floor has been solved by pur Crystal Shield, with good thermal insulation performance. It will not be cold even if barefoot steps on it. It is very comfortable. Coupled with the rebound technical layer it has good flexibility.Even if you keep bending degrees, you don&#;t have to worry about falling pain. It is especially suitable for homes with elderly and children.SPC floor will be very astringent in case of water, that is, the sliding friction will increase, and the ground anti-skid performance will be very good.It also has high wear resistance.Even if the floor is rubbed back and forth with a steel wire brush, there will be no scratches, and the service life is more than years.Moreover, with a net weight of only -kg per square meter,Carmen JaneThe floor tile is directly paved with wooden floor, which is % of the raw materials of general floor. It can reasonably save the height width ratio of indoor space and reduce the bearing capacity of the floor.The SPC floor does not swell and deform, and does not need to be maintained in the middle and later stages. There is a sound insulation and noise reduction layer at the bottom and the actual effect of sound insulation and noise reduction is also very good.There are many kinds of floors used in interior decoration. Community owners who have experience in interior decoration should know that different kinds of floors have different home decoration effects. Which kind of floor is better?Let&#;s take a look at the types of solid wood composite flooring.Second, the composite solid wood floor is a kind of wood floor inherited by the large family of solid wood floor, so it is actually a new type of solid wood floor.Because it has the advantages of pure natural wood feeling, convenient installation and maintenance, anti-corrosion and waterproof, bacteriostasis and applicable electric heating, it has become a key fashionable floor type in European countries and has been gradually accepted by the people in China.

Beautiful and diverse colors, seamless splicing construction, convenient and fast installationnew product, About solid wood composite floor.Log color floor looks more natural and has an elegant feeling. It is a common floor color in home decoration.Ash wood floor is closer to the natural color, a variety of furniture styles, warm and natural, and can also improve the indoor brightness.Those who need sound insulation should choose WPC instead of SPC vinyl flooring.WPC is excellent in this kind of insulation.Its thickness enables it to absorb sound.For this reason, it won&#;t make any sound when you walk on it.If you want to walk on the SPC floor, you will definitely make a walking sound.Carmen Jane,The real wood floor is processed with a whole plate, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture.From the front, the relief surface is no different from the crystal surface. From the side, touch it with your hand, the processing technology is highly regulated;Its structure is complicated, its quality varies greatly, and its essential quality is not easy to distinguish;

Structure: it is made of pure solid wood from inside to outside, which is often made of pine, fir and other softwood. Select the number of wear-resistant revolutionsBuvinica, the electronic organ architectural coating floor is also the main product in the recent popular sales market.Beautiful and bright appearance, with super thick wear-resistant layer, and the upper foot is stronger. The appearance is very similar to the solid wood floor, but the price is far less than the solid wood floor.The solid wood composite floor is overlapped and laminated by the boards of different greening plants,BuvinicaFloor construction, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small, the specification stability is good, and the wood texture and comfortable feet of the solid wood floor are preserved.Pout, with considerable profits.How can we avoid buying refurbished boards? After the floor has just been laid, always keep the indoor air circulating.Shop edit voice

Narrow board specifications are also China&#;s characteristics. Solid wood flooring looks generous, too expensive and has poor stability; China&#;s flooring manufacturers make imitation solid wood flooring. Looking at its specifications as solid wood flooring, it is cheap and stable. The four sides are made into V-grooves which can really confuse the fake with the real, and the thickness is basically about mm. It has been implemented in the market for less than a year and is very popular. Easy to install. Skin allergy.packing,Look at the moisture content.Of course, its advantage is not just this.Compared with ordinary flooring,BuvinicaUse of floor leather, what are the reasons for the popularity of SPC flooring?Ninth, laser cutting is simple and easy.

Ecological environment protection the patent of the utility model has the advantages of being conducive to installation and maintenance, and prevents the defects of strengthening the composite floor, such as high formaldehyde content standard astringent upper feet and so on.production costs, Various surface treatments (concave convex pattern, hand grip pattern, pair pattern, mirror pattern)Entering the flooring market, the marks of the world&#;s top ten brands,BuvinicaWood floor damp proof pad, China&#;s top ten brands and flooring top ten brands can be seen everywhere.Experts pointed out that truly mature brands attach great importance to brand image.Their honorary titles are often awarded by authoritative institutions, such as China&#;s top ten flooring brands, which are produced by the Chinese brand network combined with the voting of Internet users, with high authority.Therefore people who want to be a floor agent (floor franchise) should clearly understand the authorized organization of the brand honor certificate when doing brand survey. After days, maggots appeared on the floor.This problem is because the floor contains a lot of impurities.Buvinica, The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors.If there are cracks inside the wooden floor, it must be replaced.As a result, the internal cracks will lead to the depression of the wood floor, which has a great impact on the normal use. High elasticity and super impact resistance.Pengpai stone plastic floor has soft texture, so it has good elasticity. It has good elasticity recovery under the impact of heavy objects. Its foot feeling is comfortable, which is called 'soft gold of ground materials'.Even if you fall down, it is not easy to get hurt. Installing stone plastic floors at home can protect the elderly and children.

Finally, the internal rupture of the wooden floor is related to the quality of the logs of your choice. Generally such problems rarely occur.How to deal with cracks in wooden floors. Rich colors and patternsIllinden, a variety of furniture styles, warm and natural, and can also improve the indoor brightness.First, the wear resistance is not as thick as that of reinforced composite floor and double-layer composite floor;Abony,IllindenWaterproof composite solid wood floor,From the front, the relief surface is no different from the crystal surface. From the side, touch it with your hand, and there are wood grain patterns on the surface.PVC floor has ordinary floor raw materials, which can not be compared with the actual effect of sound insulation, and its sound insulation performance can reach - sound shells. Therefore PVC floor is selected in the natural environment that must be quiet, such as hospital wards, school libraries, multi-al halls, cinemas, etc,You will no longer have to worry that the sound of high-heeled shoes and the ground will harm your logical thinking. PVC flooring can show you a more comfortable and personalized living environment.Look at the substrate, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, and wood has been used since to years. However, imported floors, especially FSC certified plates, have strict restrictions on wood species, so wood base materials are better.

Call a deer a horse: the commercial family pretends that the low-priced tree species are high-priced tree species, which is purely to deceive consumers by using the blind spot of consumers&#; knowledge.Advantages of reinforced composite wood floor. The construction of installation works is convenient.target,However, does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body.Solid wood flooring is made of natural wood materials, which is integrated without production and processing. Of course it accepts the unique characteristics of wood, which is easy to arch and deform.Production and processing of composite flooring is generally not easy to happen.Compared with wood flooring, first, wood flooring is more environmentally friendly, durable and has a long service life. Wood flooring is processed from natural wood, which is more environmentally friendly than artificial floor leather, and the service life of wood flooring is up to years.Second, the decorative effect is not as real and natural as the wooden floor. The wooden floor is hard and soft, and it is not easy to dust, giving people a high-level decoration effect and a sense of solemnity unmatched by other materials.Third: wood flooring is more precious than floor leather. Because it is derived from natural forest resources,IllindenIs the wooden floor easy to remove, it has a certain artistic value after precision processing, which brings more choices for home decoration.Brand introduction of floor leather

A foot pad shall be placed in front of the door to reduce the wear of sand on the floor.Test conclusion,SPC floor is mainly made of calcium carbonate, including pur Crystal Shield transparent layer, wear-resistant layer, color film layer, especially suitable for home furniture floor. Remove the residual glue and glue on the ground.Wood plastic flooring manufacturer.jpgIllinden, the floor is hard and the surface color changes, so it is generally paved indoors and on the ground where the sun is not direct. The storage temperature is preferably ℃ ~ ℃. In order to prolong the service life of the floor paint cloth and maintain a long-term beauty, daily maintenance and maintenance are also very important. First,IllindenThere are several types of SPC floor buckle, keep the board surface clean and free of sand and dust friction on the board surface; prevent pollutionThe objects shall be removed in time. Pay attention not to scrub with aone, cyclohexanone, concentrated alkaline water and other organic solvents to prevent color fading, degumming, cracking or warping of the surface. They can be wiped with detergent or detergent. They shall be cleaned with semi dry mop on weekdays to prevent dirty water from penetrating into the joint and damaging the bond. Do not scrape or scratch the floor surface with sharp tools. The packaging is rough, the printing quality of the publicity album is poor, the attributes are pieced together, and the slogan selling points are set by set, which often misappropriates the album attributes of large companies.

Is the home floor paved with solid wood or structurally reinforced floor?For reinforced wood flooring, the main standard of floor environmental protection is formaldehyde emission.Under the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panels was E (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit was very loose.Even if the product meets this standard, its formaldehyde content may exceed three times that of E wood-based panel which is seriously harmful to human health. Therefore, it must not be used for home decoration.Therefore, in the first environmental protection revolution, the flooring industry implemented E environmental protection standard, that is, formaldehyde emission ≤ m/l.Although it does not pose a threat to the human body, there is still a lot of free formaldehyde on the floor.The flooring industry has started the second environmental protection revolution.In this environmental protection revolution, the flooring industry has implemented E environmental protection standard, that is, formaldehyde emission ≤ m/l.The best way to identify whether the floor is environmentally friendly is to smell a large area on the floor with a hammer to make the floor smell a lot of free formaldehyde. About solid wood composite floor.middleman,Solid wood composite floor gives consideration to strengthening the stability of the floor and the beautiful and generous solid wood floor, calcium powder has good thermal conductivity, so paving the floor at home is the best choice. Even if it gets hot, it will not release harmful gases.SPC floor is a new type of floor, also known as stone plastic floor. Its base material is a composite plate made of stone powder and thermoplastic polymer, which is stirred evenly and extruded at high temperature. At the same time, rich patterns, fully meet the needs of personalized design, with many varieties and fashionable colors, which can simulate various natural or artificial patterns.The decorative layer of laminate floor is generally imitated by computer, which can imitate wood patterns of various materials, or stone to make unique patterns that are not available in nature.agent,RaysonTen famous brands of laminate flooring,Since the wear-resistant layer on the surface of the strengthened ground has good wear resistance, compression resistance, impact resistance, fire and flame retardancy, chemical pollution resistance and other properties, in daily use, it only needs to be cleaned with a twisted dry rag, mop or vacuum cleaner. If the ground is greasy and dirty, it can be wiped with a rag and detergent.Third, environmental protection is comfortable.The application and marketing promotion of PVC latch floor in China has a history of ten years. From the early stage,RaysonWood flooring manufacturer production base, it has entered institutions and institutions such as colleges and universities, hospitals and outpatient departments in China, mainly LVT latch floor (thin thickness, the key is mm) and WPC latch floor (ordinary thin thickness: mm, mm). SPC floor is a new product in recent five years. Most LVT / WPC are made of steam pressure,Customized delivery time up to days.However, SPC floor can be formed by integrated extrusion process, and the delivery time can be shortened several times.Rayson, Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor, without keel. As long as the ground is flat the building height can be improved.In addition, due to the simple installation regulations, the safety hazards caused by installation are also greatly reduced.Solid wood flooring has high environmental protection health and comfort, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor? After the floor has just been laid and is deeply loved by many small partners.Solid wood flooring has many advantages

Fifth, strong ground anti-skid. Select the machining accuracy of mechanical equipment.Lacquer cloth green ( piece)quality,SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.Finally, heat conduction is fast.Solid wood floor is very beneficial to physical and mental health, environmental protection and excellent home decoration effect.The price is quite expensive. Installation and maintenance must be done carefully, and waxing should be done according to time.The price of ordinary solid wood flooring ranges from yuan / m to yuan / m, and some expensive ones even dare to reach yuan / mHow many years can solid wood flooring be used?From the perspective of the general service life of the floor, whether it is solid wood floor, reinforced composite floor or multi-layer composite floor if it is used at home, it can generally be used for - years depending on the use environment.

thicknessQuality improvement, Good fire resistance.Regulation effect: wood has certain moisture absorption performance. After indoor decoration with dry wood, the air humidity is too high, and the wood absorbs part of the moisture from the air. On the contrary, it releases the moisture, which has a certain regulation effect on the indoor relative humidity and gives people a comfortable environment.According to the measurement, in the houses decorated with wood, the temperature is low in summer and warm in winter.In this category, it can be shown that it is a relatively safe commodity.In addition, it should be noted that the release of formaldehyde must take a whole process of time. The formaldehyde content tested at this stage does not represent the long-term formaldehyde content.Delcevo, Call a deer a horse: the commercial family pretends that the low-priced tree species are high-priced tree species, which is purely to deceive consumers by using the blind spot of consumers&#; knowledge. Fire protection, fire rating B, second only to stone The machining accuracy is poor, and it is often claimed that it is: imported large plate and domestic slotting.

Fire protection, second only to stone.Fourth, high ductility and strong impact resistance.Ladov,First, polish the damaged place with water abrasive paper dipped in soap liquid, and then repair the eyebrow after finishing, and then brush the paint. It must be dry for less than hours, then polish the damaged place with water abrasive paper, and then wipe the floor wax for polishing.Polymer base material layer: a composite plate made of stone powder and thermoplastic polymer materials after stirring evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics. Therefore, this floor has good strength and toughness. Ecological environmental protection;Paxtakor,Before putting down the new floor, please remember the following tips: complete all home decoration tasks.One of the best things you can do before installing a new floor is to complete all other changes in the room first.Whether it&#;s new paint new wallpaper or regular maintenance, completing these projects in advance will help protect your beautiful new floor from damage.The second: I can&#;t tell the taste. The domestic price of this floor is more than yuan;WPC wood flooring is amazing in touch.It&#;s thick, so you&#;ll feel comfortable under your feet.Great stability.When you walk on the floor you will feel that it has been buffered.The thickness of the floor has good thermal insulation, so the floor will remain warm in the cold season.

Laminate flooring contains a certain amount of formaldehyde, which will be harmful to human body if it exceeds the index value specified by the state (mg / L). When purchasing, it is most suitable to choose products certified by the national environmental protection mark or inspection free products.Formaldehyde, commonly known as formalin, is a colorless gas with strong pungent smell and is easily soluble in water, alcohol and ether.The effects of formaldehyde on human health are mainly manifested in abnormal smell, stimulation reaction, allergic reaction, abnormalities of lung, liver and immune system, especially in children and pregnant women sensitive to formaldehyde.Seventh, sound insulation and noise reduction.Customer first, Products of well-known brand manufacturers with business history are preferredDefects: poor wear resistance, no fire prevention, no corrosion resistance, very easy to regain moisture, deformation thermal deformation, folding, etc., and must be polished and waxed on time, which is difficult for medical treatment. If the outdoor humidity exceeds the indoor humidity,LadovDifference between laminate floor and solid wood floor, close the windows and doors to maintain a low humidity in the room. If the outdoor humidity is lower than the indoor humidity, open the windows and doors to reduce the indoor humidity.In case of cold and humid temperature, central air conditioning or electric fan can be used.

It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo,LadovHow about a wooden floor on the tiles, ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.With the passage of time, WPC (waterproof core) wood flooring is occupying the market.This floor is very important.It is not only waterproof but also durable.Welcome calls , lift up all the furniture instead of pushing and pulling.The best protection is at the bottom of the furniture legs.In addition, if you have a refrigerator, piano and other heavy objects at home, you&#;d better share the weight with a protective pad.We hope these techniques will help simplify the plan for installing new floors.If you plan to renovate your house and add new floor elements, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.European and American countries call this kind of floor RVP (rigid vinyl plate), rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, with a thickness of about .mm, transparent texture, strong adhesion, wear resistance and scratch resistance, and the wear-resistant coefficient can reach - revolutions.[]Ladov,More accurately, the grasp of details in the installation process is also different from that of wood floor.According to the current market survey,LadovWhat is the standard size of wooden floor, the SPC lock floor of different brands will have edge warping, arching, large expansion joints, and even lock fracture after paving on individual sites. Never soak the floor with water during use. If there is an accident, mop the floor with a dry mop in time.PVC flooring has certain bacteriostatic properties. Some excellent PVC flooring are added with bacteriostatic agents in the production process, which has a strong ability to remove most bacteria and inhibit bacterial reproduction.Therefore, the natural environment with high requirements for disinfection and sterilization such as PVC floor in hospital consulting room

Daily maintenance does not need waxing. It can be wiped with towel or wet mop. It is widely used in indoor families, hospitals, studies, office buildings, factories public places, supermarkets, businesses, gymnasiums and other places.SPC floor is mainly composed of a certain proportion of calcium powder and PVC stabilizer to form a composite floor paving material.It is a new material invented in response to national emission reduction, hard SPC indoor floor.SPC floor takes calcium powder as the main raw material. After plasticizing and extruding sheet, four roll calendering hot compress color film decorative layer and wear-resistant layer, SPC floor does not contain heavy metal formaldehyde with harmful substances. It is an environmental protection floor free of formaldehyde and a real formaldehyde floor.In addition, pay attention to whether there are sawdust and stratification on the cutting surface of the plate and whether there are sawdust and stratification on the cutting surface of the solid wood floor.Cochani, Easy to install.The standard ones are generally -mm wide, about and long. The wide ones are mostly more than mm long and about mm wide. The narrow ones are - mm long and about mm wide. They are similar to the specifications of solid wood flooring, and most of them are called imitation solid wood flooring.San Carlos, which has the advantage of environmental protection.Laminate flooring has rich colors and patterns, which fully meet the needs of personalized design. There are many varieties of designs and colors, which can simulate the wood patterns of all kinds of materials, and even imitate stone and create unique patterns that are not found in nature.

What is their price level?The price of reinforced wood floor is generally between - yuan. If it is engineering plate it will be cheaper.But the price is also related to well-known brands. If it&#;s family decoration, it&#;s better to choose a better one.Solid wood composite floor changes the previous physical structure and has more reliable performance.In terms of price,CochaniUse of floor leather, it is cheaper than solid wood flooring and belongs to medium-sized consumer goods.Pavement building decoration materials are popular materials in family decoration at this stage.Generally speaking, floors between yuan / m and yuan / m are better.Famous brands not only have the test report provided by the national quality inspection authority;Detailed marks are marked on the wooden case of commodity packaging.Trademark registration, manufacturer, operator,CochaniWhat’s the name of floor leather, model and specification, total number, detailed address, contact number, etc.Here we need to remind you that you don&#;t have to buy three non laminate floors cheaply to prevent being cheated. easy care.Test results,Two layers of solid wood composite floor.Mute, that is, add cork cushion or other cushion similar to cork on the back of the floor.After using the cork floor mat, the noise of stepping on the floor can be reduced by more than dB (quoted from the data of the cork floor mat factory), which can increase the foot feeling, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.European and American countries call this kind of floor RVP (rigid vinyl plate), rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, with a thickness of about .mm, transparent texture, strong adhesion, wear resistance and scratch resistance, and the wear-resistant coefficient can reach - revolutions.[]

Exposure to obvious sunlight, will cause early embrittlement of solid wood board floor paint, which should be minimized.OK or not?,Twelfth, heat transfer, cold prevention and warmth preservation.Advantages of reinforced composite wood floor.The floor packaging produced by regular manufacturers shall have the manufacturer&#;s name, address, instructions and executive standards marked in Chinese.Since , and its name and number is the national standard: GB / T - impregnated paper laminated wood flooring.Cochani,In fact, it is very simple to prevent wood floor cracking. Usually,CochaniWaterproof floor, do a good job in floor maintenance and humidification of wood floor in areas with low average moisture content, which can be effectively prevented, or raise flowers and fish at home, and put buckets in the corner of the room.Generally speaking, most of the strengthened solid wood composite floors are up to standard commodities within the scope of standardized formaldehyde emission.According to relevant requirements, the formaldehyde emission of commodities in the room shall be class E, i.e. ≤ mg/l. The difference between composite floor and solid wood floor. Pay attention to the size.

The meaning of brand is by no means limited to the popularity of the enterprise.A mature and successful brand does not have strength and popularity, but forms a strong psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers. It is bred in the eyes of consumers by many factors, such as the accumulation of time, the practical action of enterprises, the continuous improvement of products and services and so on.Enterprise brand is a commitment and an attitude of an enterprise, which is a guarantee for consumers.Therefore, when consumers choose products, they&#;d better choose big brands to get better guarantee of quality, and the refurbished board is made of floor, white putty and paint.Scrape the surface with a blade. If it is white it is a refurbished plate.How to choose the floor?What is the difference between solid wood, composite and reinforced?Kavadachi,KavadachiFloor leather construction,Hearing effect: wood is a natural porous material with good sound absorption and sound insulation performance.Therefore, houses decorated with wood materials have small echo and good sound insulation effect, giving people a comfortable and quiet feeling.I have seen the evaluation video before. Netizens rub the steel ball of cleaning tableware back and forth on the SPC floor, and there is no trace on the surface.If it&#;s a wooden floor, I think it&#;s not like it anymore. You can see how good its wear resistance is.Kos,durability Green environmental protectionSecondly, the wear resistance is several times that of ordinary floor.

Anti slip, more astringent in case of water, not easy to fallFor reinforced wood flooring, the main standard of floor environmental protection is formaldehyde emission.Under the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panels was E (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit was very loose.Even if the product meets this standard, its formaldehyde content may exceed three times that of E wood-based panel, which is seriously harmful to human health. Therefore, in the first environmental protection revolution, the flooring industry implemented E environmental protection standard, that is, formaldehyde emission ≤ m/l.Although it does not pose a threat to the human body, there is still a lot of free formaldehyde on the floor.The flooring industry has started the second environmental protection revolution.In this environmental protection revolution, the flooring industry has implemented E environmental protection standard, that is, formaldehyde emission ≤ m/l.The best way to identify whether the floor is environmentally friendly is to smell a large area on the floor with a hammer to make the floor smell a lot of free formaldehyde.Sixth, fire and flame retardant.Latest quotation, Stimulating effect.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing glue shall be applied on the ground according to the size of the floor paint cloth, it can be paved. When pasting so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air,KavadachiThere are several types of SPC floor buckle, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth. Green environmental protection. SPC floor is a new floor material invented in response to national emission reduction. PVC resin, the main raw material of SPC floor, is an environmentally friendly and non-toxic renewable resource. It is free of formaldehyde, lead and benzene, heavy metals and carcinogens, soluble volatiles and radiation. It is truly natural environmental protection.SPC floor is a reusable ground material, which is of great significance to protect our earth&#;s natural resources and ecological environment.

The most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the air, and the wood floor cracks in this processPrice, Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time,KavadachiHow much is the wooden floor per square meter, it has special advantages in the reconstruction of old buildings.Which brand of Taiyuan Fenghua sports floor? The wooden floor of Basketball Hall produced by professional manufacturers adopts high-quality raw materials, such as Russian maple,Third etc.stabilityKavadachi, look.Main differences between WPC and SPC flooringHow to buy solid wood composite flooring?

Advantages: it is warm for many days and cool in summer. Of course, the lines are comfortable on the feet and resist germs.Wood plastic flooring manufacturer.jpgGoiter,The influence of foundation materials on the price of reinforced base plate.Strengthening the middle layer is mainly the base, and the method to distinguish the base material is good or bad.You can cut off the garbage with the merchant to see if it is white. The whiter the better.Generally, the base plate of reinforced floor accounts for most of the price of reinforced floor.High priced laminate flooring is a good base material. Mixed pine is used as the base material for second-line and third-line brand flooring. Of course, the production cost is not high, and the price of laminate flooring can also be borne. Main performance.York, Domestic cheap decorative paper is usually used. The pattern of this decorative paper is fuzzy. The biggest defect is that it is generally not UV resistant and will fade after sunlight.This is why some consumers reflect the discoloration of the places near the balcony and windows three or four months after the floor is installed. The base material is poor, medium and low density board or particleboard is used, the quality index is unstable, it is mainly the veneer thickness (decorative board thickness). The multi-layer solid wood floor has ,-, and the new three-layer solid wood floor has , to ,GoiterSPC floor brand is good, mm.PVC floor is generally between mm and mm thick, and the net weight per square meter is about -kg, which is less than % of the raw materials of general floor.In multi-storey buildings, it has incomparable advantages of load and saving indoor space.In addition, it has unique advantages in the renewal and transformation of old engineering buildings.

Advantages: of course, the grain is comfortable, wear-resistant, corrosion-resistant, moisture-resistant, flame retardant, and the maintenance is better than that of solid wood.Suitable soil temperature, can also be paved in the kitchen.First, polish the damaged place with water abrasive paper dipped in soap liquid, and then repair the eyebrow after finishing, and then brush the paint. It must be dry for less than hours then polish the damaged place with water abrasive paper, and then wipe the floor wax for polishing.Defects: poor wear resistance, no fire prevention, no corrosion resistance, very easy to regain moisture, deformation, thermal deformation, etc., and must be polished and waxed on time, which is difficult for medical treatment.Workshop costThe laminate floor is composed of wear-resistant layer, decorative layer, base material and balance layer.The wear-resistant layer, decorative layer and balance layer are manually printed, and the base material is made of fast-growing forest materials. The cost is lower than that of solid wood flooring. At the same time it can be produced on a large scale, and the relative cost performance is high.Due to the different base materials, the price difference is obvious, and there is more room for customers to choose, which is suitable for people at all levels.Structure: it is made of pure solid wood from inside to outside,GoiterWooden floor mat, which is often made of pine, fir and other softwood. Wear resistance level.

Excellent SPC floor has strong wear resistance, depiction resistance, pollution resistance and compression resistance. It is widely used in hospitals, colleges, processing plants, shops, chain hotels,GoiterIs the floor leather afraid of heat, exhibitions, subway stations and other public places.Inspection items stadiums,Twelfth, heat transfer, cold prevention and warmth preservation.Ash wood (Fraxinus mandshurica): it has good stability and natural grain, but it grows in a dry environment and is easy to deform in the late stage of tide. It is more suitable in the north than in the south.Excellent SPC floor has strong wear resistance, depiction resistance, pollution resistance and compression resistance. It is widely used in hospitals, colleges office buildings, processing plants, shops, chain hotels, exhibitions, public libraries, stadiums, subway stations and other public places.Goiter,At the same time, for those who pursue value, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.SPC floor is an excellent raw material with the advantages of wear resistance, durability, sports culture, colleges and universities, culture and education, kindergartens, business services, offices, etc.The shadow of SPC floor can be seen.When using liquid spray waxing, shake the container containing floor wax first and stir it fully and evenly.Before waxing the wooden floor of the whole room, local trial must be carried out in inconspicuous places such as corners of the room to confirm whether there are abnormalities.In order to prevent floor wax from polluting walls, skirting lines and furniture, the above parts must be covered with adhesive tape paper.Fully soak the floor wax with a clean rag. It&#;s best not to fall off.

From the surface coating, there are aluminum oxide, melamine and piano paint. Look at the surface of the board.Shtep, Use large-scale floor renovation machinery to polish the floor for many times, remove about .mm of paint layer, surface layer and wood layer, and make the floor surface in a new state of fine and smooth after fine sand.The floor corners are ground with a small grinder to make the whole smooth.In short,ShtepWhat is the thickness of wood floor, floor leather is a layer of synthetic plastic decorative products. In addition to many advantages such as wear resistance, pollution resistance, moisture resistance, small water absorption, simple construction, convenient maintenance and low price, warm in winter and cool in summer of wood floor, narrowing the gap between wood floor and wood floor. No wonder floor leather will be so popular.If you are also worried about the shortcomings of wood flooring,ShtepEnvironmentally friendly wood flooring, you might as well consider floor leather materials.Plastic floor leather has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength foot feeling, wear resistance, pollution resistance, corrosion resistance,ShtepFloor care essential oil, heat insulation, sound insulation, moisture resistance, small water absorption, good insulation, self extinguishing, easy cleaning simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, factories with high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor leather belongs to soft floor. It is a floor roll produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor leather is m ~ m, the width is mm ~ mm, and the total thickness is mm (household) ~ mm (public building).Limassol, Main performance.People who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), and is more and more loved and used by owners.However, it does not refer to formaldehyde, but refers to that the formaldehyde emission is less than .mg/l, and the harm is small.Second soak in water.

High concentration formaldehyde is a genotoxic chemical.In animal experiments, high concentration inhalation in the laboratory can cause nasopharyngeal tumors.If the scratch is serious and the floor paint is damaged and white, some countermeasures need to be taken.Third, look.reform, raw material parts, growth and development parts and lower sawing points it will inevitably cause inconsistent color difference.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.thickness

In particular, the previous agency said that the laminate floor is a waterproof floor, which is only the surface layer. In fact, the only taboo in the application of laminate floor is small blisters.Free consultation,What is the difference between solid wood flooring and solid wood composite flooring?Second, mild to moderate scratches.PVC flooring has certain bacteriostatic properties. Some excellent PVC flooring are added with bacteriostatic agents in the production process, which has a strong ability to remove most bacteria and inhibit bacterial reproduction.Therefore, the natural environment with high requirements for disinfection and sterilization, such as PVC floor in hospital consulting room, is the most ideal choice.Shtep, The conventional thickness is only -mm. The ultra-thin design is a bold innovation in the professional industry. The surface is printed with materials to improve the service life of people flow field. The surface imitates the real wood texture and natural marble texture. In view of the characteristics of raw materials, it has fast heat conduction and long heat storage duration. It is the preferred floor for floor heating. Exposure to obvious sunlight, or significant increase or decrease in room temperature, will cause early embrittlement of solid wood board floor paint, which should be minimized. A foot pad shall be placed in front of the door to reduce the wear of sand on the floor.

SPC vinyl flooring manufacturers focus a lot on the dense core of SPC flooring.They tried to make it more resistant to shrinkage. Exposure to obvious sunlight, or significant increase or decrease in room temperature, will cause early embrittlement of solid wood board floor paint,GostivarCan the floor leather stick to the wall, Recyclable: reduce urban construction waste, recycle construction waste and reuse old floors.Secondly,GostivarWaterproof material, choose the color you want.Alkmar, The machining accuracy is poor, and it is often claimed that it is: imported large plate and domestic slotting. Exposure to obvious sunlight, or significant increase or decrease in room temperature, will cause early embrittlement of solid wood board floor paint, which should be minimized.For laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel, seriously endangering human health, so it must not be used for home decoration.Therefore, the flooring industry implemented the E level environmental protection standard, that is, the formaldehyde emission is ≤ ? / L. although it basically does not pose a threat to the human body, there are still a lot of free formaldehyde left in the floor.The flooring industry has started the second environmental protection revolution and launched E environmental protection standard, which has reduced the formaldehyde emission of the floor to . ? / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, and then smell it with your nose. A good floor should have a wood smell, but a bad one has a strong pungent smell!

Wooden wedges and nails shall not be used for fixing during construction.The contact surface between the wooden wedge and the nail is too small, and the grip strength of the nail is insufficient.Bones are easy to loosen, and people will make a sound when stepping on them.Rubber: rubber with poor toughness and stability.One of the modern trends in house design is WPC wood flooring.Because of their many qualities,GostivarGood laminate flooring, many people like this floor better than others.However if you will find the quality and durability of SPC flooring, you will also leave people that WPC and SPC flooring have their advantages and disadvantages.If you choose one of them, it&#;s no problem!Now we&#;ll tell you the difference between the two.Promise and keep promise, Various surface treatments (concave convex pattern, hand grip pattern, mirror pattern) Smell The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors.

The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors.Price Good fire resistance.If it is really serious or the actual recovery is not satisfactory, we must remove and replace the floor, find technicians to solve it, take out the seriously damaged wooden floor and remove it.The standard specifications are adopted by most members of the European flooring Producers Association. This is still the case. China also adopts the standard specifications when importing the most advanced laminate processing lines in the world. In other words the products of large laminate manufacturers processed by imported lines are still the standard specifications. There are many dealers in the market who flaunt themselvesOur products are imported. It is often said that 'imported ones have no wide plate specification and thickness of about mm'. It should be that most imported floors have no wide plate specification and thickened size.Gostivar, Sticker method: stick the same wood grain paper on the front and back of the board.PVC floor has ordinary floor raw materials, which can not be compared with the actual effect of sound insulation, and its sound insulation performance can reach - sound shells. Therefore, PVC floor is selected in the natural environment that must be quiet, such as hospital wards, school libraries, multi-al halls, cinemas, etc,You will no longer have to worry that the sound of high-heeled shoes and the ground will harm your logical thinking. PVC flooring can show you a more comfortable and personalized living environment.Selling price of solid wood flooring

Before putting down the new floor, please remember the following tips: complete all home decoration tasks.One of the best things you can do before installing a new floor is to complete all other changes in the room first.Whether it&#;s new paint, completing these projects in advance will help protect your beautiful new floor from damage.The third kind: you can smell the faint smell of wood. This floor shows that there is little glue content.It can reach European standard E levelRAMADA,The floor shall try to avoid direct irradiation of strong light and long-term heating of high-temperature artificial light source, emit indoor moisture and maintain normal indoor temperature, which is also conducive to the service life of the floor.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.Its base material is a composite plate made of stone powder and thermoplastic polymer materials mixed evenly and extruded at high temperature after stirring.At the same time, it has the properties and characteristics of wood and plastic to ensure the strength and toughness of the floor.Let&#;s take a look at the advantages of SPC floor.durabilityColon,The wooden floor packaging produced by reliable manufacturers should have the manufacturer&#;s name, detailed address, operation manual and national standards marked in Chinese.Since , the national standard for lifting wood flooring has been gradually implemented, and its name and serial number are the national standard: GB / t- prepreg paper laminated wood flooring.UV layer: the coating formed after UV oil is cured with curing agent, which can prevent the volatilization of chemicals in the plate by UV.[]Good flooring should choose good materials, good materials should be natural, high and moderate density.Some people think that the higher the density of wood-based panel, the better. In fact, it is not. If the density is too high, its water absorption and expansion rate is also high, which is easy to cause size change and lead to floor deformation.Secondly, we should rely on advanced flooring production lines and equipment and rigorous technology to produce first-class flooring.Judging the quality of the floor can also be measured from the quality inspection certificate and other honorary certificates such as 'national quality inspection free products', 'ISO quality system certification', 'ISO environmental system certification', because the acquisition of these honors must refine the results of an enterprise&#;s operation.

You can take some steps to ensure a smooth and seamless installation: remove the base plate and door frame before starting.This will make it easier for your installation team to get the perfect fit.No matter what kind of floor you are currently using, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.Rubber: rubber with poor toughness and stability. Consider environmental protection factors.Welcome to inquireHigh concentration formaldehyde is a genotoxic chemical.In animal experiments, high concentration inhalation in the laboratory can cause nasopharyngeal tumors.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat,RAMADAEffect drawing of wooden floor background wall living room, clean and dry, it can be glued and paved.Gluing is the last process before paving, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance,RAMADAWood floor or floor tile, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.Many people think WPC floors are thick and therefore durable.OK, it&#;s a durable floor, but no more than SPC floor.Compared with WPC flooring, SPC flooring has good density.The higher density makes them resistant to damage and heavy weight.They will not be affected by the falling or moving of heavy objects.Therefore, SPC is considered to have good durability.

The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat clean and dry, and the tool shall be a toothed rubber scraper.During gluing it can be glued and paved.Gluing is the last process before paving glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap,RAMADAImitation wood floor, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.Latest consultation,The surface of SPC floor has a special transparent wear-resistant layer processed by high technology and its wear-resistant revolution can reach more than revolutions.Among the traditional ground materials, the wear-resistant laminate floor has only - revolutions.The name SPC floor is easy to cause people&#;s misunderstanding. SPC floor is one of the categories of PVC floor. When you think of PVC floor, you think more of plastic. Many people will confuse PVC floor with PVC pipe. Plastic contains toxic substances and is harmful to human body. Brush the finish paint three to four times according to the above procedure, and the last time does not need polishing.The density of laminate floor substrate (high density fiberboard) shall be .-. g / cm, and it is not appropriate to have too low or too high density.RAMADA,Third, the processing technology is highly regulated;Its structure is complicated, and its essential quality is not easy to distinguish;The standard ones are generally -mm wide, about and long. The wide ones are mostly more than mm long and about mm wide. The narrow ones are - mm long and about mm wide. They are similar to the specifications of solid wood flooring, and most of them are called imitation solid wood flooring.The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.

SPC floor has a thickness of mm-mm,KovilianWood floor maintenance, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation. Good wear resistance and stability.Kovilian,First, the price is cost-effective. High cost performance.Chennai, Good wear resistance and stability. Keep the floor dry and clean. If there is dirt on the floor surface, generally wipe it dry with a damp mop without dripping water.Whether it is solid wood composite floor or solid wood floor, its surface needs to be maintained and does not want to strengthen the surface of the floor.When cleaning the solid wood floor, remember not to wipe the solid wood floor directly with wetland.Please choose a special detergent for wood floor cleaning to keep the wood floor in its natural primary color and prevent the wood floor from cracking.

The most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the dry air absorbs moisture from the wood floor, high-grade, calm, classical and unique furniture charm.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Install basketball wood flooring manufacturer&#;s flooring?Sports wood flooring installation basketball wood flooring manufacturers now have many unprofessional basketball wood flooring manufacturers.In order to reduce costs, reduce costs, and cause the floor to slip. Main performance.supply,SPC floor has several advantages: imitation of water, imitation of fire, formaldehyde anti oil stain, can replace ceramic tile and wood floor.Applicable to all major tooling and home decoration.For example, hospitals, schools, hotels, hotels, restaurants and other places. In terms of foot feeling, solid wood is better than reinforcement. According to national industry standards, all solid wood is mm thick and wood keel ceiling is selected for installation,KovilianWhat is the size of the wooden floor, so the upper foot is better than mm thick reinforcement plate.How to distinguish true and false solid wood flooring?The standard ones are generally -mm wide about and long. The wide ones are mostly more than mm long and about mm wide. The narrow ones are - mm long and about mm wide. They are similar to the specifications of solid wood flooring, and most of them are called imitation solid wood flooring.

High price performance price ratio: because of its unique structural connection, the regulations on wood are not too high, and raw materials can also be used flexibly, so the price is much lower than that of solid wood flooring.target, Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time, it has special advantages in the reconstruction of old buildings. Remove the residual glue and glue on the ground.At the same time, for those who pursue value, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.Kovilian, SPC floors are subject to biological resistance treatment, and the unique sealing of the surface layer makes the products have the characteristics of anti bacteria and antibacterial, and meet the cleaning requirements of various departments and institutions.When it comes to the choice of decoration flooring, you can think of ceramic tile, marble and wood flooring. However, SPC flooring has become the first choice for people to buy Flooring in developed countries and regions such as Europe, America, Japan and South Korea, and the domestic market is gradually accepting SPC flooring. Why SPC flooring is popular? First of all, what is SPC flooring and how about SPC flooring,Now let&#;s learn what SPC floor is and how SPC floor is.SPC is the abbreviation of stone plastic composites (stone plastic composites). The main raw material is polyvinyl chloride resin. It is made by extruding SPC substrate by extruder combined with T-shaped die, and heating, laminating and embossing PVC wear-resistant layer, PVC color film and SPC substrate by three roll or four roll calender at one time. Glue is not used in the production process. Ultra light and ultra-thin Exposure to obvious sunlight, or significant increase or decrease in room temperature, will cause early embrittlement of solid wood board floor paint

It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, terrazzo ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring:After - floors are assembled on the flat ground, whether the tenon and groove bite is appropriate, not too loose or too tight by hand and eye observation.At the same time, carefully check the assembly height difference and gap between floors.Sakavin,In dry weather, if it is dry season in autumn and winter, pay attention to increase the ground humidity. Wet mop can be used to mop the ground to prevent ground cracking.In addition to the second article the other five articles determine the trend of floor price. Therefore, consumers must remember these five articles before buying their favorite products, and then go shopping to avoid buying losses.The wooden floor is warm in color, and it&#;s comfortable to shop at home without shoes, but most bosses love it and hate it. If you get wet,SakavinHow about composite floor, it&#;s easy to be damaged. It takes time to maintain health every time, Green environmental protection Super wear resistance Water resistance

We hope these techniques will help simplify the plan for installing new floors.If you plan to renovate your house and add new floor elements, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.European and American countries call this kind of floor RVP (rigid vinyl plate), rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, with a thickness of about .mm, transparent texture, strong adhesion, wear resistance and scratch resistance, and the wear-resistant coefficient can reach - revolutions.[]The reinforced composite floor structure is divided into wear-resistant layer, decorative design layer, high-density board layer and balance (waterproof) layer. A large amount of mixed glue is added to the lining.If the glue used by the manufacturer fails to pass the test, there will be formaldehyde. The reinforced composite floor is wrapped with high-rise plastic film to ensure that formaldehyde remains inside.However, when the temperature is constantly changing and applied, formaldehyde will leak into the air. Keep the floor dry and clean. If there is dirt on the floor surface, generally wipe it dry with a damp mop without dripping water.High value, SPC floor has special anti-skid property. The more it meets water, the more astringent it is. Even if you wear running shoes with nails, you won&#;t leave scratches on the floor. A foot pad shall be placed in front of the door to reduce the wear of sand on the floor.Well known brands: LG and Hanhua flooring in Korea, Armstrong flooring in the United States, Jiefu and Tejia flooring in France, fulbo flooring in Sweden, longxilu, tahilong, Dongli flooring in Japan,SakavinSolid wood flooring, and domestic bonier flooring.For the pursuit of cost performance, choose Korean brands, Japanese brands for the pursuit of quality, European and American brands for the pursuit of brand effect, and domestic brands for low prices.

When asked about the service life and wear resistance of SPC floor in the message area of the message board, it is often mentioned to take out artifact such as fruit knife or key and scratch on the surface of SPC floor. If there are scratches, they are classified as non wear resistance.In fact, the national wear resistance test of PVC latch floor is not simply to scratch on the surface with artifact,SakavinWhat is the material of waterproof floor, but to grind and polish the floor with thick bottom circular stone roller under the condition of kg charging. After how many revolutions of rotation and polishing, the minimum speed of national composite floor is rpm.Therefore, the wear resistance of PVC latch floor is professionally measured by the national testing center.query,The current woodworking is basically done by woodworkers. The 'general woodworking' method is adopted, and the shrinkage joint size is not calculated according to the thermal expansion and cold contraction parameters provided by SPC flooring factory.If the room is slightly larger, but the reserved gap is too small, especially when the temperature difference between winter and summer is too large, it is very easy to have no gap to expand, resulting in arching and warping.Manufacturers generally consist of four layers of raw materials, namely wear-resistant layer, decorative layer, which cuts off some of the upper edge of the floor, and then applies paint to cover the color of the substrate, so that the edge color has a sense of hierarchy, which is similar to the solid wood floor, so it is deeply loved by the majority of consumers.After the chamfered and painted board is paved, there is a very shallow small seam on the upper edge between the board and the board, which is easy to accumulate dust and inconvenient to clean.There is no such problem for boards without chamfering.Sakavin,durabilitySixth his specifications and dimensions are also related to his total price.SPC floor is constantly favored by people at home and abroad. It is an all-round new favorite integrating the advantages of ceramic tiles and other types of floor materials. It is presented and interpreted with a variety of colors, environmentally friendly materials and diversified colors, making the noise and disturbance lose the sense of existence.Let&#;s take a look at the advantages of SPC floor after class.

Non toxic and tasteless, not afraid of water, fire and tide;In terms of scratch resistance, resource use and anti-skid performance, SPC floor is better than laminate floor. Environmental protection level.Moita,... the surface layer of SPC floor has been solved by pur Crystal Shield and has good air permeability. Even if barefoot steps on it, it will not feel cold and very comfortable. In addition, the rebound technical layer has stronger ductility. Even if it is constantly bent for degrees, it is OK. There is no need to worry about falling pain. It is especially suitable for homes with old children.SPC floor will be 'astringent' when it meets water, that is, the friction will increase and the ground anti-skid characteristics are very good.Its wear resistance is also very high, that is, the use of steel wire brush to rub on the floor, there will be no scratches, and the service life can reach more than years.In addition, SPC floor is very lightweight, with a net weight of only -kg per square meter, which is % of the general floor material, which can reasonably save the height width ratio of indoor space and alleviate the load of road surface.No swelling, no deformation, not to mention the maintenance in the middle and later stage. There is a sound insulation and noise reduction layer at the bottom of SPC floor, and the actual effect of sound insulation and noise reduction is also very good.Many people will choose to decorate with wooden floor, practical and beautiful.Do you know how wood floors are classified and why?Now let&#;s introduce the three categories of wood flooring.First, pay attention to the size of the board, and try to choose a wide board with a length of cm, a width of -cm and a thickness of cm, or a standard board with a width of cm and a thickness of cm.Fusagasuga, High cost performance. Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor, without keel. As long as the ground is flat, the building height can be improved.In addition, the safety hazards caused by installation are also greatly reduced.Solid wood flooring has high environmental protection, health and comfort, and is deeply loved by many small partners.Solid wood flooring has many advantages, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor?Look at the moisture content.

Look at the moisture content.Third, it cannot be repaired.If the cracks on the surface of the wooden floor are not serious,MoitaWooden floor or ceramic tile, or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, flattening the cracked part of the floor and repainting it.Where is it,Melamine surface coating is generally used for wallboard, tabletop board,MoitaDalian plastic wood flooring, etc. it is used in places with low wear resistance requirements. In the flooring industry, this kind of surface coated floor is called 'false floor'Its wear-resistant revolution is only - revolutions. If it is used with high strength, the decorative paper on the surface will wear out after two or three months. The standard laminate floor will not have such a problem after years of normal use. There is no wear-resistant layer on this kind of floor decorative paper, the pattern is beautiful and clear, and it is relatively smooth when touched by hand, which is the place where laymen are easy to be fooled.The surface texture of solid wood floor is clear and natural, and there is no obvious color difference on both sides.Medium and low grade solid wood floors indicate that cracks may occur.If the crack is not a problem between textures, there will be some hidden dangers if the crack passes through the texture.In fact, of the inspection indexes of floor leather, such as wear resistance water resistance, are improved with the hardness of floor leather.Therefore pollution resistance and flame resistance expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements,MoitaFloor glue waterproof, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, but also on the floor of workshop.The ground of the weak point machine room.

Beautiful: it can simulate all kinds of wood grain, design and color on the computer.Product range, the previous agency said that the laminate floor is a waterproof floor, which is only the surface layer. In fact, the only taboo in the application of laminate floor is small blisters. Check whether there is sand on the ground and carry out curing treatment in time. Moisture proof, no deformation in case of water, toilet, basement, etcMoita, LookAdvantages: of course, the grain is comfortable, wear-resistant, corrosion-resistant, moisture-resistant, flame retardant, and the maintenance is better than that of solid wood.Suitable soil temperature, can also be paved in the kitchen.In order to reduce the cost, SPC latch floor with extremely poor quality and low price is adopted, which has poor stability and large thermal expansion and cold contraction.The loss is caused by the 'general paving method'.

The surface is treated with special technology, without air holes and water impermeability. It is no problem to shop in the areas where toilets and kitchens communicate with water.No, it will not be like the ordinary wooden floor. Once it bubbles, it will deform and bubble, or it will become moldy due to high humidity.Color film layer: various decorative layers of wood grain stone grain and carpet grain, which can meet the different needs of different occasions and different tastes.Leica Da palmeira,High quality flooring shall be made of high-quality materials, which shall be natural, high-density and moderate.Some people think that the higher the density of wood-based panel, the better. In fact, if the density is too high, the higher its water absorption and expansion rate is, which is easy to cause floor deformation.Second, rely on advanced floor production lines, other honorary certificates such as national quality inspection free products, because the acquisition of these honors will inevitably lead to the fine operation of the enterprise.The real wood floor is processed with a whole plate, with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture.Dewar,The fire safety performance of SPC floor and homogeneous transparent waterproof coiled material floor shall meet the national industry standard gb-b, only second to marble.The quality of solid wood composite floor is stable, not easy to damage and easy to use.In addition, there are impact resistance, anti-static, anti environmental pollution anti sunlight, anti smoke, easy installation, easy maintenance, etc.

Keep the floor dry and clean. If there is dirt on the floor surface, generally wipe it dry with a damp mop without dripping water.Keep the floor dry and clean. It is clean. Do not wash it with water to avoid long-term immersion of the floor.For oil stains, customers attach great importance to quality.Although the solid wood floor is good, the maintenance is very complicated.In , all stores released high wear-resistant solid wood flooring.It is said that this kind of floor not only has the characteristics of high wear resistance and general solid wood floor, but also has strong coating adhesion, high definition, good corrosion resistance, strong waterproof not easy to crack and paint.Online consultation,The quality of solid wood composite floor is stable, not easy to damage and easy to use.Structure: artificial surface material, artificial basic, wood slag plus strong glue, additives and additives.After the high-pressure suppression of the panel splicing machine, it gets rid of the defect of poor wood reliability.Defects: some indoor formaldehyde is restrained, the quality of the sales market is uneven, and most plates are shoddy.

However, from the perspective of installation method, laminate floor, multi-layer floor and ordinary flat buckle solid wood floor belong to disposable floor because they must be fixed with nails or glue and cannot be reused.With the unique tiger Tenon Technology of Tiange floor,Leica Da palmeiraImported laminate brand, it can realize glue free, nail free and dragon free during installation, so that the floor can be disassembled, installed and used repeatedly.For example,Leica Da palmeiraWood flooring and composite flooring, in case of water immersion and other accidents, the floor can be quickly removed and reinstalled.If you live for many years and want to move away, you can also remove the floor and reinstall it in a new home. For the floors of some precious tree species such as teak, this is very important, because the logs are more and more precious, and the floor can maintain and increase its value.Quality management,Defects: small blisters can not be repaired after damage, and the upper foot is poor.Inspection results: A foot pad shall be placed in front of the door to reduce the wear of sand on the floor.Leica Da palmeira,Before installing the solid wood floor, it must be ensured that the floor is dry, flat and free of garbage.Generally, the installation of the floor must be carried out before other decoration works are completed.If the floor is not flat, the installation will cause some floors and keel to hang, which will make a sound when people step on it.Well known brands not only have the test report produced by China&#;s quality inspection authority;The marks on the packing box of the product are complete.Registered trademark, manufacturer, business unit, quantity, address, telephone number,Leica Da palmeiraHow much is laminate flooring, etc.Here to remind you, don&#;t be greedy for cheap to buy three non laminate flooring, so as not to be deceived. Never soak the floor with water during use. If there is an accident, mop the floor with a dry mop in time.

Remove the pavement and remove dust to avoid the accumulation of crushed stones or friction coefficient floating dust on the floor surface.The shoe sole can be placed at the door to prevent broken stones or friction coefficient dust from being brought into the room.Generally, when cleaning the floor, you can wipe the road surface with cotton strips.Do not wipe the floor with wet mop or corrosive liquid (such as soap liquid and vehicle gasoline). In order to better improve the indoor air quality humidity, humidification equipment can be selected in autumn and winter to maintain the indoor air quality humidity at % - %.When moving furniture, you can&#;t push and pull the door on the ground immediately. You should stretch out and remove it with care.The bottom of furniture that moves frequently should be pasted with an eraser.Select well-known brands;Delgada Bridge,Because the whole family decoration process will use a lot of raw materials such as solid wood plates and plywood, as well as a lot of wooden furniture, it is easy to grow insects when encountering appropriate temperature and environmental humidity, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.Surin, SPC floor material is soft and has good ductility. Under the impact of hanging objects, the ductility recovers well, and the upper feet are comfortable and happy. Stimulating effect.Defects: small blisters can not be repaired after damage, and the upper foot is poor.

The surface layer of SPC floor has been solved by pur Crystal Shield, with good thermal insulation performance. It will not be cold even if barefoot steps on it. It is very comfortable. Coupled with the rebound technical layer, it has good flexibility.Even if you keep bending degrees, you don&#;t have to worry about falling pain. It is especially suitable for homes with elderly and children.SPC floor will be very astringent in case of water, that is the sliding friction will increase, and the ground anti-skid performance will be very good.It also has high wear resistance.Even if the floor is rubbed back and forth with a steel wire brush, there will be no scratches, and the service life is more than years.Moreover, SPC floor is very light, with a net weight of only -kg per square meter, which is % of the raw materials of general floor. It can reasonably save the height width ratio of indoor space and reduce the bearing capacity of the floor.The SPC floor does not swell and deform,Delgada BridgeRanking of top ten famous brands of laminate flooring, and does not need to be maintained in the middle and later stages. There is a sound insulation and noise reduction layer at the bottom, and the actual effect of sound insulation and noise reduction is also very good.There are many kinds of floors used in interior decoration. Community owners who have experience in interior decoration should know that different kinds of floors have different home decoration effects. Which kind of floor is better?Let&#;s take a look at the types of solid wood composite flooring.Wear resistant paper invented in the s was used on the surface of bowling alley.Because of the creation, invention and application of anti-static laminate flooring products, European manufacturers use wear-resistant paper to strengthen the production and manufacture of anti-static flooring, and take it as a key component to strengthen anti-static flooring.At present, the domestic rate of wear-resistant paper in China has reached about %, but it still needs to be imported.The key index values for evaluating the quality of wear-resistant layer are:Prepare the floor for hardwood installationEconomic management,Second, soak in water. Beautiful and diverse colors, seamless splicing construction, convenient and fast installation.However, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process, does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body.

Formaldehyde damage.Welcome calls ,Needless to say for a long time, the lacquered cloth market was occupied by low-grade unlined lacquered cloth produced in Taiwan and other overseas countries giving consumers the wrong message that China&#;s quality is not up to standard. In fact, after the inspection of these, the surface wear-resistant layer is only .mm, which is made of poorly processed and Recycled PVC. It does not meet the national standards for plastic coiled materials at all, so its service life is short,In case of large-scale immersion or partial long-term immersion in water accidentally, if there is any leveling stay, such as blanket pattern design, wood floor pattern design, etc.,Delgada BridgeAbout wood flooring,Even be able to complete personalized customization.The wireframe is real, beautiful and generous. Equipped with a variety of accessories and decorative design strips, it can integrate the practical effect of beautiful and generous decorative design.Now we have VSPC flooring, and another layer of processed bamboo is basically attached to SPC, which makes the floor tone milder and feel more comfortable.The surface layer of laminate floor is a wear-resistant layer,Delgada BridgeSPC flooring factory, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, corrosion resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.